Axiscreat 5050 CNC Machine User Manual

1. Product Overview

The Axiscreat 5050 CNC Machine is a precision engraving and milling machine designed for various materials including wood, acrylic, and aluminum. It features linear rails and ball screws on all three axes for enhanced stability and accuracy, a powerful 710W trim router spindle, and a user-friendly touchscreen offline controller.

Figure 1: Overview of the Axiscreat 5050 CNC Machine.

Key Features:

• Linear Rails and Ball Screws: Equipped with dual HG-H15 linear rails and ball screws on all axes for high precision, speed, stability, and rigidity.
• Powerful Spindle: Upgraded 710W carving spindle with a maximum speed of 30,000 RPM for efficient cutting and engraving.
• Modular Design: Pre-assembled modular structure allows for quick setup.
• Stepper Motors: Four NEMA 17 stepper motors (2.5A current, 1.2N.M torque) for precise performance.
• Touchscreen Controller: 4.3-inch touchscreen for intuitive and convenient operation.
• Spacious Engraving Area: 500 x 500 x 110mm (19.7 x 19.7 x 4.33 inches) workspace.
• Expansion Capabilities: Based on FluidNC v3.8.4 with Wi-Fi support, offering interfaces for NEMA 23 stepper motors, laser output, VFD spindle control, and water-cooled spindles.

2. Safety Information

Operating any CNC machine requires adherence to strict safety guidelines to prevent injury and damage to the equipment. Read and understand all safety instructions before operating the Axiscreat 5050 CNC Machine.

• Personal Protective Equipment (PPE): Always wear safety glasses to protect against flying debris. Consider a dust mask to avoid inhaling fine particles, especially when working with wood or MDF.
• Electrical Safety: Ensure the machine is properly grounded. Verify the voltage setting on the control box matches your mains power supply (110V or 220V) before powering on. If using 220V mains with the included 110V router spindle, a step-down transformer is required.
• Work Area: Keep the workspace clean, well-lit, and free of obstructions. Ensure adequate ventilation.
• Emergency Stop: Familiarize yourself with the location and operation of the emergency stop switch. In case of any malfunction or emergency, press the E-STOP button immediately.
• Material Securing: Always securely clamp your workpiece to the worktable to prevent movement during operation, which can cause tool breakage or injury.
• Tooling: Use appropriate and sharp cutting tools for the material being machined. Ensure tools are correctly installed and tightened in the spindle collet.
• Supervision: Never leave the machine unattended while it is operating.

3. Setup and Assembly

The Axiscreat 5050 CNC Machine features a modular design for simplified assembly. The pre-assembled modular structure allows for setup in approximately 20 minutes.

3.1 Initial Assembly Steps

1. Unpack all components and verify against the packing list.
2. Follow the detailed assembly instructions provided in the included manual or refer to the manufacturer's official assembly video (if available) for visual guidance.
3. Connect the necessary electrical components as per the wiring diagram.

Figure 2: Modular design for easy assembly.

3.2 Power Connection and Voltage Setting

Important: The machine is factory-set to 110V. If your mains power supply is 220V, you must switch the Power Switch on the control box to 220V before connecting power. Failure to do so will damage the control box.

The included router spindle is designed for 110V only. For safety and proper operation with a 220V mains supply, it is strongly recommended to use a step-down transformer to convert 220V to 110V before connecting the spindle.

Figure 3: Control box with power switch and various ports. The power switch for voltage selection is located on the back of the control box.

4. Operating Instructions

This section outlines the basic steps for operating your Axiscreat 5050 CNC Machine.

4.1 Workspace and Material Preparation

• Ensure the machine's work area is clear.
• Securely mount your chosen material (e.g., wood, acrylic, aluminum, MDF, leather, plywood) to the worktable. The spacious engraving area is 500 x 500 x 110mm (19.7 x 19.7 x 4.33 inches).
• Select and install the appropriate cutting tool for your material and desired operation.

Figure 4: Dimensions of the working area.

Figure 5: Examples of materials suitable for processing, including plywood, solid wood, MDF, leather, metal surfaces, and acrylic.

4.2 Spindle Operation

• The 710W trim router spindle offers adjustable speeds from 6,000 to 30,000 RPM.
• Adjust the spindle speed according to the material and cutting tool being used. Refer to material guidelines for optimal settings.

Figure 6: Spindle speed adjustment dial (6-speed adjustable from 6000 to 30000 RPM) and linear guide ball screw detail.

4.3 Using the Touchscreen Offline Controller

The 4.3-inch touchscreen provides an intuitive interface for controlling the machine. Use it to load G-code files, set origins, start/pause/resume programs, and return to the machine's home position.

• Load Program: Insert an SD card with your G-code file into the SD Card Slot on the controller. Select the file from the touchscreen interface.
• Set Origin: Manually position the spindle to your desired starting point (workpiece origin) and set the X, Y, and Z axes to zero on the controller.
• Start/Pause/Resume: Use the dedicated buttons on the controller to manage the carving process.
• Home: Return the machine to its predefined home position.

Figure 7: Close-up of the automatic tool setter, 710W power trimmer router, ball screw, and dual linear rails, highlighting stability and accuracy features.

Figure 8: Stepper motor, emphasizing less noise and better precision.

Note: No official product videos were provided in the product data for embedding. Please refer to the manufacturer's website for any available video tutorials.

5. Routine Maintenance

Regular maintenance ensures the longevity, stability, and precision of your Axiscreat 5050 CNC Machine.

• Check Coupling Screws: Periodically inspect the set screws on the couplings of all three axes (X, Y, Z). If any are loose, tighten them promptly to maintain machine stability and prevent misalignment.
• Lubrication & Cleanliness:
  • Ensure the linear rails and ball screws on all three axes are properly lubricated.
  • If dry, apply a small amount of appropriate lubricant designed for linear motion components.
  • Wipe the surfaces clean of any dust, debris, or accumulated material chips.
• Clear the Work Area: Before each operation, check the worktable and surrounding areas for any obstructions that might interfere with axis movement. Foreign objects can trigger alarms, cause axis misalignment, and affect machining accuracy.

6. Troubleshooting

This section provides solutions to common issues you might encounter. For problems not listed here, please contact customer support.

7. Specifications

8. Warranty and Support

8.1 Warranty Information

Specific warranty details for the Axiscreat 5050 CNC Machine may vary. Please refer to the warranty card included with your product, the purchase documentation, or the official Axiscreat website for the most accurate and up-to-date warranty terms and conditions.

8.2 Customer Support

For technical assistance, troubleshooting guidance, or any questions regarding your Axiscreat 5050 CNC Machine, please contact Axiscreat customer support. Contact information can typically be found on the manufacturer's website or in your product packaging.

You can also visit the product page on Amazon for additional resources and customer reviews.