Ucloveria B0FNX2RW7Q

Ucloveria 112" U-Shaped Sleeper Sofa Bed Instruction Manual

Model: B0FNX2RW7Q

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Ucloveria 112" U-Shaped Sleeper Sofa Bed. Please read all instructions carefully before use to ensure proper setup and safe operation. Keep this manual for future reference.

Safety Information

WARNING: All foam and upholstered surfaces meet flammability standards. Keep away from open flames or high heat sources. Supervise children and pets to avoid entrapment risks.

  • Ensure all components are securely fastened before use.
  • Do not exceed the recommended weight capacity.
  • Keep small parts away from children during assembly.
  • Avoid placing the sofa near heat sources or in direct sunlight to prevent material degradation.

Package Contents

Your Ucloveria Sleeper Sofa Bed is shipped in multiple boxes. Please verify all components are present before beginning assembly.

  • Loveseat x 1
  • Pull Out Bed x 1
  • Chaise x 2
  • Arm Pillows x 2
  • Armrest x 2
Ucloveria 112 inch U-Shaped Sleeper Sofa Bed showing dimensions and packaging

Figure 1: Overview of the Ucloveria 112" U-Shaped Sleeper Sofa Bed with key dimensions and indication of shipping in three boxes.

Setup and Assembly

Assembly is required for this product. While some components may be pre-assembled, final assembly of the sectional pieces and attachment of armrests and legs will be necessary. It is recommended to have two people for assembly.

Assembly Steps:

  1. Unpack all components and verify against the package contents list.
  2. Attach the legs to the base of each sofa section.
  3. Connect the individual sofa sections using the provided component connectors.
  4. Attach the armrests to the main sofa body.
  5. Place the backrest cushions and arm pillows.
  6. Ensure all connections are secure before use.

Operating Instructions

Converting to a Sleeper Bed:

The sofa features an integrated pull-out bed mechanism for easy conversion. To transform the sofa into a bed:

  1. Remove any cushions from the main seating area.
  2. Locate the pull-out handle on the front of the sofa.
  3. Gently pull the mechanism outwards until the bed fully extends and locks into place.
  4. To revert to sofa mode, lift the front edge of the bed slightly and push it back into the sofa frame until it locks securely.
Ucloveria Sleeper Sofa Bed in extended bed configuration

Figure 2: The Ucloveria Sleeper Sofa Bed fully extended into a comfortable sleeping surface.

Using the Storage Chaise:

The dual reversible chaises include spacious storage compartments. To access the storage:

  1. Lift the seat cushion of the chaise from the front edge.
  2. The lid will open to reveal the storage space underneath.
  3. Close the lid securely after use.
Ucloveria Sleeper Sofa Bed showing open storage chaise with items inside

Figure 3: One of the storage chaises open, demonstrating ample space for blankets and pillows.

The chaise sections are reversible, allowing you to customize the sofa's layout to fit your room's configuration.

Ucloveria Sleeper Sofa Bed with reversible chaise lounge

Figure 4: The Ucloveria Sleeper Sofa Bed configured with the chaise on the right side, illustrating its reversible design.

Using USB Charging Ports and Side Pockets:

The sofa includes integrated USB charging ports and side pockets for convenience. Simply plug your device's USB cable into the port to charge. Use the side pockets to store small items like remote controls or magazines.

Ucloveria Sleeper Sofa Bed showing USB charging ports and side pockets

Figure 5: Close-up view of the sofa's armrest featuring a fast charging station with USB ports and a side pocket.

Video 1: Demonstration of the sleeper sofa's integrated storage and pull-out bed feature.

Maintenance and Care

Proper care will extend the life and appearance of your Ucloveria Sleeper Sofa Bed.

  • Fabric Care: Dry clean only. Spot clean cushions with mild detergent and cool water. Avoid excessive water exposure. Allow cushions to dry naturally and away from direct sunlight.
  • Frame Care: Regularly check and tighten any loose screws or connectors.
  • Cushion Care: Rotate and fluff cushions periodically to maintain their shape and even out wear.

Specifications

FeatureDetail
BrandUcloveria
ModelB0FNX2RW7Q
TypeSofa Bed
ColorBlack
StyleModern
Product Dimensions (D x W x H)55"D x 112"W x 38"H
Seat Depth27 inches
Seat Height18.5 Inches
Arm Height24 Inches
Seating Capacity4.0
Upholstery Fabric TypeLinen
Frame Material TypeFSC-Certified Wood
Fill MaterialMemory Foam (Seat), Foam (Back)
Special FeaturesFolding, Removable Cushion, Reversible Chaise, Space Saving, Storage, USB Ports
Assembly RequiredYes

Troubleshooting

No specific troubleshooting steps are provided in the product information. If you encounter issues with assembly or functionality, please review the assembly video and ensure all components are correctly installed and tightened. For further assistance, contact Ucloveria customer support.

Warranty and Support

The Ucloveria Sleeper Sofa Bed comes with a Limited Warranty. For details regarding warranty coverage, claims, or product support, please refer to the warranty card included with your purchase or contact Ucloveria customer service directly.

Manufacturer: Ucloveria

© 2026 Ucloveria. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.