JDZ E80-C

JDZ Upgraded Electric Ear Wax Removal Kit, Model E80-C Instruction Manual

Introduction and Overview

The JDZ Upgraded Electric Ear Wax Removal Kit, Model E80-C, provides a safe and efficient solution for earwax removal at home. This advanced ear cleaning system is designed for both adults and children, offering consistent, gentle water flow to effectively clear earwax without the risks associated with traditional tools.

JDZ Electric Ear Wax Remover, ideal ear cleaning solution for home use.

JDZ Electric Ear Wax Remover, ideal ear cleaning solution for home use.

  • Safe & Efficient: Eliminates risks of scratching or over-insertion common with manual tools, providing gentle and consistent water flow.
  • Integrated Tank for Mess-Free Use: Features a 2-in-1 tank design that stores clean water and collects wastewater simultaneously, preventing spills and simplifying cleanup.
  • Adjustable Water Pressure: Offers three adjustable pressure modes (Low, Pulse, High) to suit sensitive ears and stubborn wax.
  • User-Friendly All-in-One Solution: Ready to use in seconds with intuitive one-button control and clear water level indicators.
  • Rechargeable & Long-Lasting: Equipped with a built-in rechargeable battery for cordless convenience, providing weeks of use on a single charge.
  • IPX7 Waterproof: Designed with IPX7 waterproof construction for easy cleaning and safe use in the shower.

Setup

Before first use, ensure the device is fully charged using the provided Type-C charging cable. The LED display will show the battery percentage.

  1. Separate the Tanks: Gently pull down the bottom half of the device to separate the clean water tank from the main unit.
  2. Fill with Warm Water: Fill the designated clean water side of the tank with warm water. The recommended temperature is between 37°C ± 2°C (98°F ± 4°F). Do not inject water >60°C.
  3. Attach Suction Hose: Ensure the suction hose from the main unit is placed into the clean water side of the tank.
  4. Reassemble Tanks: Align the main unit with the water tank and rotate clockwise to lock them securely in place.
  5. Install Nozzle: Select one of the 12 replaceable soft-touch nozzles. For initial use, it is recommended to start with a 5-hole nozzle for a gentler spray. Simply push the chosen nozzle onto the tip of the device until it is firmly attached.
Diagram illustrating the upgraded dual tank design of the JDZ Electric Ear Wax Removal Kit, separating clean water and sewage collection.

The innovative dual-tank system ensures hygienic operation by keeping clean water and collected wastewater completely separate, preventing cross-contamination.

For a visual guide on setup, please refer to the video below:

Official product video demonstrating the features and usage of the JDZ Electric Ear Wax Removal Kit with its irrigation flushing system.

Operating Instructions

Follow these steps for effective and comfortable earwax removal:

  1. Power On: Long press the power button (top button) for a few seconds to turn on the device. The LED display will illuminate.
  2. Select Pressure Mode: Short press the mode button (bottom button) to cycle through the three pressure modes: Low (L), Pulse (P), and High (H). Start with 'Low' for sensitive ears or first-time use.
  3. Position Device: Gently place the soft silicone nozzle at the entrance of your ear canal. Ensure a snug fit to prevent water leakage.
  4. Begin Spray: Short press the power button to start the water spray. Lean your head slightly over a sink or basin to allow the wastewater to drain into the collection tank.
  5. Cleanse Ear: Continue spraying for a few seconds, or until you feel the earwax dislodge. You may need to gently massage the outer ear to help dislodge stubborn wax.
  6. Repeat if Necessary: If needed, repeat the process for the same ear or switch to the other ear.
  7. Power Off: Long press the power button to turn off the device once finished.
Image showing three adjustable pressure settings (Low, Pulse, High) and different colored nozzles for the JDZ Electric Ear Wax Removal Kit.

The kit includes various nozzles and offers three pressure modes: Low for gentle cleaning, Pulse for alternative options, and High for deep cleaning, especially with ear drops.

User-friendly steps for operating the JDZ Electric Ear Wax Removal Kit: fill water, align, install nozzle, power on, hold to ear, and clean.

Simple, intuitive steps make the ear cleaning process straightforward: fill with warm water, align and lock the tank, install a nozzle, power on and select a mode, then hold to your ear for effective cleaning.

Maintenance

Proper maintenance ensures the longevity and hygiene of your ear wax removal kit.

  • Empty and Clean Tanks: After each use, separate the tanks and empty both the clean water and wastewater compartments. Rinse them thoroughly with clean water.
  • Clean Nozzles: Remove the used nozzle and rinse it under running water. For thorough cleaning, you can use mild soap and water. Allow all nozzles to air dry completely before storing.
  • Device Cleaning: The main unit is IPX7 waterproof, allowing for easy rinsing under running water. Ensure the charging port cover is securely closed before rinsing. Do not submerge the entire device for extended periods.
  • Storage: Store the device and all accessories in a clean, dry place away from direct sunlight and extreme temperatures.
Man using the JDZ Electric Ear Wax Removal Kit in the shower, highlighting its IPX7 waterproof rating.

With an IPX7 waterproof rating, the device can be safely used in the shower, making cleanup convenient and hassle-free.

Troubleshooting

If you encounter any issues with your JDZ Electric Ear Wax Removal Kit, please refer to the following common troubleshooting tips:

  • No Spray/Weak Pressure:
    • Ensure the clean water tank is adequately filled.
    • Check that the suction hose is properly submerged in the clean water.
    • Verify that the tanks are securely locked together.
    • Confirm the device is fully charged.
    • Try a different nozzle, as some may offer different flow rates.
  • Water Leakage:
    • Ensure the nozzle is firmly attached to the device.
    • Check that the water tanks are correctly aligned and locked.
    • Make sure the silicone tip is properly sealed against your ear during use.
  • Device Not Turning On:
    • Ensure the device is fully charged.
    • Perform a long press on the power button to activate.

If problems persist, please contact customer support.

Specifications

Product Dimensions7.87 x 6.89 x 4.21 inches; 11.64 ounces
Item Model NumberE80-C
ManufacturerShenzhen Sulang Technology Co., Itd
Waterproof RatingIPX7
Water Temperature Range37°C ± 2°C (98°F ± 4°F)

Package Contents

Your JDZ Electric Ear Wax Removal Kit includes the following items:

  • 1x Electric Ear Wax Removal Device
  • 12x Replaceable Nozzles (various hole configurations)
  • 1x Type-C Charging Cable
  • 1x User Manual
Contents of the JDZ Electric Ear Wax Removal Kit package, including the device, nozzles, charging cable, and manual.

The complete package includes the main ear wax removal device, 12 replaceable nozzles, a Type-C charging cable, and a user manual.

Important Safety Information

Please read and understand all safety instructions before using this product. Failure to do so may result in injury or damage to the device.

  • Consult a healthcare professional before use if you have any pre-existing ear conditions, ear infections, ear surgery, or a perforated eardrum.
  • Do not use if you experience pain, discomfort, or dizziness during use. Discontinue immediately and consult a doctor.
  • Use only warm water within the recommended temperature range (37°C ± 2°C / 98°F ± 4°F). Water that is too hot or too cold can cause discomfort or injury.
  • Keep out of reach of children.
  • Do not insert the nozzle too deeply into the ear canal.
  • Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
Effective & Safe Ear Wax Removal, eliminating risks of scratching or over-insertion compared to traditional tools.

This electric ear wax remover is designed to be effective and safe, minimizing the risks associated with traditional ear cleaning methods like cotton swabs or ear picks.

Warranty and Support

This product comes with a standard manufacturer's warranty. For detailed warranty information, product support, or to inquire about replacement parts, please refer to the contact information provided in your user manual or visit the official JDZ website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.