Introduction
Thank you for choosing the Generic Portable Wardrobe Closet. This manual provides essential information for the safe assembly, operation, and maintenance of your new wardrobe. Please read it thoroughly before use and retain it for future reference.
Safety Information
- Avoid overloading shelves: Do not exceed the maximum weight capacity of 15 lb (6.8 kg) per shelf to prevent damage or collapse.
- Tip-over risk: Ensure the wardrobe is assembled on a flat, stable surface. Be cautious of tip-over risk, especially when fully loaded.
- Keep away from high heat sources: Do not place the wardrobe near heaters, fireplaces, or direct sunlight for prolonged periods, as this may damage the fabric cover.
- Assembly: Follow all assembly instructions carefully. Ensure all connections are secure before use.
- Children and Pets: Keep children and pets away from the wardrobe during assembly. Do not allow children to climb on or play inside the wardrobe.
Package Contents
Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Non-Woven Fabric Cover
- Steel Tubes (various lengths for frame, hanging rods, and shelves)
- Plastic Connectors
- Fabric Shelves
- Instruction Manual (this document)
Assembly Instructions
Assembly typically requires one person and takes approximately 30-60 minutes. No tools are generally required, as components snap together.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify all parts against the package contents list.
- Assemble the Base Frame: Connect the shortest steel tubes using the plastic connectors to form the rectangular base of the wardrobe. Ensure all tubes are fully inserted into the connectors for stability.
- Install Vertical Supports: Insert longer vertical steel tubes into the base connectors.
- Add Lower Shelves: Slide the fabric shelves over the horizontal steel tubes and connect them to the vertical supports using plastic connectors. Ensure the fabric is taut.
- Build Middle and Upper Sections: Continue adding vertical supports, horizontal tubes, and fabric shelves layer by layer, following the desired configuration for hanging rods and shelves. Refer to the product images for guidance on shelf and rod placement.
- Install Hanging Rods: Insert the steel hanging rods into the designated plastic connectors at the top of the hanging sections.
- Attach Top Frame: Complete the top rectangular frame using the remaining steel tubes and plastic connectors.
- Drape Fabric Cover: Carefully drape the non-woven fabric cover over the assembled frame. Ensure it fits snugly and the zippers align correctly. Secure any ties or fasteners.
- Final Check: Gently shake the assembled wardrobe to ensure all connections are secure and the structure is stable.
Figure 1: Product Dimensions. This image illustrates the overall dimensions of the assembled wardrobe, including width, depth, and height.
Figure 2: Internal Structure and Features. This image highlights the internal organization, including three hanging sections, multiple storage shelves, and convenient side pockets.
Operating Instructions
- Hanging Clothes: Use the three designated hanging rods for garments that require hanging, such as shirts, dresses, and coats. Distribute weight evenly across the rods.
- Shelf Storage: Utilize the six shelves for folded clothing, accessories, shoes, or storage boxes. Do not exceed the 15 lb (6.8 kg) weight limit per shelf.
- Side Pockets: The side pockets can be used for small items like socks, ties, or other light accessories.
- Accessing Contents: Use the zippers on the fabric cover to open and close the wardrobe for easy access to your stored items.
Maintenance
- Cleaning the Fabric Cover: Wipe the non-woven fabric cover with a damp cloth to remove dust and spills. Avoid using harsh chemicals or abrasive cleaners.
- Frame Cleaning: The steel tubes and plastic connectors can be wiped clean with a damp cloth as needed.
- Regular Inspection: Periodically check all connections to ensure they remain secure. Tighten any loose connections to maintain stability.
- Weight Distribution: Always ensure weight is distributed evenly to prevent stress on the frame and shelves.
Figure 3: Non-Woven Fabric Cover. This image demonstrates the waterproof nature of the fabric cover, which helps protect contents from dust and moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Wardrobe is unstable or wobbly. | Connections are not fully secured; uneven surface; overloaded. | Ensure all steel tubes are fully inserted into plastic connectors. Place the wardrobe on a flat, level surface. Reduce the load if overloaded. |
| Parts do not fit together. | Incorrect orientation of parts; manufacturing defect. | Double-check the instruction diagrams for correct part orientation. If parts are genuinely incompatible, contact customer support. |
| Fabric cover does not fit. | Frame assembled incorrectly; cover oriented incorrectly. | Verify the frame dimensions match the product specifications. Ensure the cover is oriented correctly (e.g., front to front). |
| Hanging rods bend or sag. | Overloaded hanging rods. | Reduce the number or weight of items hanging on the rods. Distribute weight more evenly. |
| Zippers are stuck or broken. | Fabric caught in zipper; excessive force used. | Gently try to free any fabric caught. Avoid forcing the zipper. If broken, contact customer support. |
| Shelves sag or tear. | Exceeded weight capacity; sharp objects placed on shelves. | Do not exceed 15 lb (6.8 kg) per shelf. Avoid placing sharp or heavy concentrated items directly on the fabric shelves. |
| Wardrobe collapsed. | Severe overloading; improper assembly; damaged components. | Immediately remove all contents. Inspect all components for damage. Reassemble carefully, ensuring all connections are secure and weight limits are respected. If components are damaged, contact customer support. |
Specifications
- Model: 06FTD32
- Brand: Generic
- Dimensions (L x W x H): 49.21 x 17.71 x 66.14 inches (125 x 45 x 168 cm)
- Item Weight: 12.55 pounds (5.69 kg)
- Material: Non-Woven Fabric Cover, Steel Tube, Plastic Connectors
- Color: Coffee
- Shelf Weight Capacity: Up to 15 lb (6.8 kg) per shelf
- Hanging Rods: 3
- Shelves: 6
Warranty and Support
For any questions, missing parts, or issues not covered in this manual, please contact the seller or manufacturer directly through your purchase platform. Please have your model number (06FTD32) and purchase date available when contacting support.