1. Introduction
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Blissthrill Cordless Pressure Washer Model 5028-20. Please read this manual thoroughly before first use and retain it for future reference.
The Blissthrill Cordless Pressure Washer is designed for portable cleaning tasks, offering 1100 PSI pressure and 2.4 GPM water flow. Its battery-powered design allows for versatile use without the need for a constant power outlet.
2. What's Included
Your Blissthrill Cordless Pressure Washer kit includes the following components:
- Battery Powered Pressure Washer Unit
- 4.0Ah 21V Lithium Battery
- Rapid Charger
- 23FT Heavy-Duty Hose
- 6-in-1 Nozzle
- Foam Pot (Foam Cannon)
- Stop Valve
- Weighted Filter Head
- Multiple Garden Hose/Faucet Connectors
- Storage Case
- User Guide
3. Setup and Installation
Follow these steps to set up your pressure washer for operation:
3.1. Connecting the Hose and Water Source
- Connect the stop valve to the pressure washer unit.
- Attach the quick connector to the stop valve.
- Connect one end of the 23FT heavy-duty hose to the quick connector.
- Choose your water source:
- Option A (Bucket/Pool): Attach the weighted filter head to the other end of the hose and submerge it in a bucket or pool of water.
- Option B (Faucet/Garden Hose): Use the appropriate garden hose/faucet connectors to attach the hose directly to a water tap or garden hose. Ensure all connections are secure to prevent leaks.
3.2. Battery Installation
- Ensure the 21V 4.0Ah lithium battery is fully charged. Refer to the charging instructions in the Maintenance section.
- Slide the charged battery into the battery slot on the bottom of the pressure washer unit until it clicks securely into place.
3.3. Attaching the Nozzle or Foam Cannon
- For Power Washing: Attach the 6-in-1 adjustable nozzle to the front of the pressure washer unit. Ensure it is firmly twisted into place.
- For Deep Cleaning with Detergent: Attach the foam pot (foam cannon) to the front of the pressure washer unit. Fill the foam pot with appropriate detergent (not included).
3.4. Installation Video Guide
For a visual guide on the installation process, please watch the official Blissthrill installation video:
4. Operating Instructions
Once assembled, follow these steps to operate your pressure washer:
- Ensure the water source is turned on (if using a faucet/garden hose) or the weighted filter is fully submerged (if using a bucket/pool).
- Press the power button on the pressure washer handle to turn on the unit.
- Squeeze the trigger to begin spraying. The unit will start drawing water and building pressure.
- Using the 6-in-1 Nozzle: Rotate the nozzle head to select the desired spray pattern (0°, 15°, 25°, 40°, jet, or shower) for different cleaning tasks. Always switch the nozzle only when the machine is off to avoid leaking.
- Using the Foam Cannon: If using the foam cannon, squeeze the trigger to apply foam to the surface. Allow the foam to sit for a few minutes before rinsing.
- Release the trigger to stop spraying. The stop valve provides precise control over water flow.
- After use, turn off the power button and disconnect the battery.
4.1. Product Demonstration Video
See the pressure washer in action with this demonstration video:
5. Maintenance
5.1. Battery Charging and Care
- Use only the provided rapid charger for the 21V 4.0Ah lithium battery.
- Charging time is approximately 4-5 hours for a full charge.
- Avoid overcharging or completely draining the battery to prolong its lifespan.
- Store the battery in a cool, dry place away from direct sunlight and extreme temperatures.
5.2. Cleaning the Filter Head
- Regularly inspect the weighted filter head for debris.
- Rinse the filter head with clean water after each use, especially when drawing water from open sources like buckets or pools.
- Remove any trapped particles to ensure optimal water flow and prevent damage to the pump.
5.3. Storage
- After each use, drain all water from the hose and the pressure washer unit.
- Clean the exterior of the unit with a damp cloth.
- Store the pressure washer and all accessories in the provided storage case in a dry, protected area.
6. Troubleshooting
If you encounter issues with your Blissthrill Cordless Pressure Washer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow or weak pressure | Air in the system (not primed) Clogged filter head Low water supply Improper hose connection | Prime the pump by pouring water into the inlet. Clean the weighted filter head. Ensure adequate water supply. Check all hose connections for tightness. |
| Unit does not turn on | Battery not charged Battery not properly installed | Charge the battery fully. Ensure the battery is securely clicked into place. |
| Water leaks from connections | Loose connections Missing O-rings or seals | Tighten all connections. Check for and replace any damaged or missing O-rings/seals. |
| Hose bends at connection, restricting flow | Hose kinked or bent too sharply | Ensure the hose is not bent at a sharp angle. If necessary, cut off a short section of the hose at the connection point to allow for a smoother flow. |
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Blissthrill |
| Model Number | 5028-20 (BL25028) |
| Power Source | Battery Powered (21V Lithium Ion) |
| Max Pressure | 1100 PSI |
| Water Flow Rate | 2.4 GPM |
| Item Weight | 5 Pounds |
| Hose Length | 23 Feet |
| Product Dimensions | 16"L x 3"W x 14"H |
| Battery Capacity | 4.0Ah |
8. Warranty and Support
Blissthrill is committed to providing quality products and customer satisfaction. For any questions, concerns, or support needs regarding your Cordless Pressure Washer, please refer to the contact information provided in your product packaging or reach out to our 24/7 support team.