Ariston NDB96SSEX 9kg Washer Dryer Instruction Manual

1. Introduction

The Ariston NDB96SSEX is a combined washer and dryer designed for household use. This appliance offers both washing and drying functionalities within a single unit, providing convenience and space efficiency. It features a 9kg washing capacity, suitable for handling daily laundry needs efficiently. This manual provides essential information for safe installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your appliance.

Figure 1: Front view of the Ariston NDB96SSEX 9kg Washer Dryer.

2. Safety Information

Please read all safety instructions carefully before installing, operating, or performing maintenance on the appliance. Retain this manual for future reference.

• Electrical Safety: Ensure the appliance is connected to a properly grounded outlet. Do not use extension cords or multiple adapters. Disconnect power before any maintenance or cleaning.
• Water Connection: Connect the appliance to the water supply using new hose sets. Do not reuse old hose sets. Ensure all connections are tight to prevent leaks.
• Child Safety: Keep children and pets away from the appliance during operation. Do not allow children to play with the controls.
• Installation: Install the appliance on a firm, level floor. Ensure adequate ventilation around the appliance. Do not install in areas exposed to freezing temperatures.
• Flammable Materials: Do not wash or dry items that have been soiled with flammable substances (e.g., cooking oil, gasoline).

3. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your washer dryer.

3.1 Unpacking

• Remove all packaging materials, including the polystyrene base and any protective film.
• Remove the transit bolts located at the rear of the appliance. Keep these bolts for future transport.

3.2 Leveling the Appliance

Level the appliance by adjusting the front feet. Use a spirit level to ensure the machine is perfectly horizontal. Proper leveling prevents excessive vibration and noise during operation.

Figure 2: Adjusting the appliance feet for leveling.

3.3 Water Connection

• Connect the cold water inlet hose to a cold water tap with a 3/4-inch thread.
• Ensure the drain hose is securely placed into a standpipe or connected to a sink trap, ensuring it is not kinked or obstructed. The drain hose should be positioned at a height between 65 cm and 100 cm from the floor.

3.4 Electrical Connection

• Plug the power cord into a grounded electrical outlet.
• Verify that the voltage and frequency match the specifications on the appliance rating plate.

3.5 First Use

Before the first wash, run a short cycle without laundry and detergent to clean the drum and remove any manufacturing residues.

4. Operating Instructions

Follow these steps for effective washing and drying.

4.1 Control Panel Overview

Figure 3: Control panel layout. Refer to the labels for specific functions.

• Program Selector Dial: Used to choose the desired wash or dry program.
• Temperature Button: Adjusts the wash temperature.
• Spin Speed Button: Modifies the spin speed.
• Start/Pause Button: Initiates or pauses the selected program.
• Display Screen: Shows program status, time remaining, and error codes.

4.2 Loading Laundry

• Sort laundry by fabric type, color, and degree of soiling.
• Open the door and load items loosely into the drum, ensuring not to overload. Leave enough space for clothes to tumble freely.

4.3 Adding Detergent and Additives

Pull out the detergent dispenser drawer and add detergent and fabric softener to the appropriate compartments. Refer to the detergent packaging for recommended dosages.

4.4 Selecting a Program

• Turn the Program Selector Dial to choose the desired wash or wash & dry program.
• Adjust temperature and spin speed using the respective buttons if needed.
• For drying only, select a drying program after a wash cycle or for pre-washed items.

4.5 Starting the Program

Press the Start/Pause button to begin the cycle. The door will lock, and the program will start.

4.6 End of Cycle

The appliance will signal the end of the cycle. The door will unlock after a short delay. Remove laundry promptly to prevent creasing.

5. Maintenance and Cleaning

Regular maintenance ensures optimal performance and extends the life of your appliance.

5.1 Cleaning the Detergent Dispenser

• Pull out the dispenser drawer completely.
• Rinse it under running water to remove any detergent residue.
• Clean the housing of the dispenser drawer with a brush.

5.2 Cleaning the Drum

Run a maintenance wash cycle (e.g., a hot wash without laundry) periodically to clean the drum and remove any residue or odors.

5.3 Cleaning the Lint Filter (for Drying)

The lint filter should be cleaned after every drying cycle to maintain drying efficiency and prevent fire hazards.

• Open the door and locate the lint filter inside the door opening.
• Remove the filter and gently peel off any accumulated lint.
• Rinse the filter under running water if necessary and ensure it is completely dry before reinserting.

Figure 4: Cleaning the lint filter.

5.4 Cleaning the Pump Filter

The pump filter should be checked and cleaned regularly (e.g., every few months) to prevent blockages.

• Place a shallow container under the filter cover to catch any residual water.
• Carefully open the filter cover, usually located at the bottom front of the appliance.
• Unscrew the filter slowly to allow water to drain.
• Remove any debris, coins, or lint from the filter.
• Clean the filter under running water and reinsert it securely.

5.5 Exterior Cleaning

Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.

6. Troubleshooting

Before contacting customer service, refer to the following table for common issues and their solutions.

7. Specifications

Technical details of the Ariston NDB96SSEX 9kg Washer Dryer.

8. Warranty and Support

8.1 Warranty Information

This Ariston NDB96SSEX washer dryer comes with a 5-year warranty from the date of purchase. This warranty covers manufacturing defects and faulty materials under normal domestic use. Please retain your proof of purchase for warranty claims.

The warranty does not cover:

• Damage caused by improper installation or use not in accordance with this manual.
• Damage caused by unauthorized repairs or modifications.
• Normal wear and tear.
• Cosmetic damage that does not affect the functionality of the appliance.

8.2 Customer Support

For technical assistance, spare parts, or to schedule a service appointment, please contact Ariston customer service. Have your model number (NDB96SSEX) and serial number ready when you call.

Contact Information:
Please refer to the Ariston official website or your purchase documentation for local customer service contact details.