Generic Cordless Ankle Heating Pad & Massager (Model CL-2888) User Manual

1. Introduction

Thank you for choosing the Generic Cordless Ankle Heating Pad & Massager, Model CL-2888. This device is designed to provide targeted heat therapy and vibration massage to the ankle area, aiding in circulation and pain relief. Please read this manual thoroughly before use to ensure safe and effective operation.

Image: The Cordless Ankle Heating Pad and Massager, Model CL-2888.

2. Safety Information

• Do not use if you have open wounds, skin infections, or severe circulatory problems. Consult a physician before use if you have any medical conditions.
• Do not use while sleeping.
• Avoid prolonged use at high temperatures to prevent skin burns.
• Keep out of reach of children.
• Do not immerse the device in water or other liquids.
• Use only the provided charging cable.
• Discontinue use immediately if you experience discomfort or adverse reactions.

3. Package Contents

• Cordless Ankle Heating Pad & Massager (1 unit)
• USB Type-C Charging Cable (1 unit)
• User Manual (1 unit)

4. Product Features

• Smart Heat Customization: Features 3 levels of heating temperature (118.4°F / 127.4°F / 136.4°F) and 3 levels of vibration intensity.
• Gentle yet Effective Therapy: Hypoallergenic fabric with overheat protection for sensitive skin.
• Ergonomic Design: Unique contour design specifically for the ankle area, adjustable size for most users.
• Portable & Rechargeable: Cordless design for use at home, office, or while traveling. Long-lasting lithium battery with USB Type-C charging.
• Intuitive Operation: User-friendly control panel with clear LED indicators.
• Automatic Shut-off: Automatically shuts off after 15 minutes to prevent overuse. Recommended daily usage should not exceed 1 hour.

Image: Illustrates the 3 levels of massage vibration for various needs.

Image: Details the 3 heating levels for infrared hot compress therapy.

5. Setup and Application

Follow these steps to properly set up and apply the ankle massager:

1. Deploy the ankle brace and place it with the hole facing down.
2. Align your back heel with the hole and step onto the ankle pad.
3. Apply the Velcro around your ankle firmly to secure the brace.
4. Ensure your heel goes into the ankle brace round hole for correct wear.

Image: Visual guide for correctly wearing the ankle massager.

6. Operating Instructions

The device features a user-friendly control panel for easy operation.

Image: Product details including the control panel layout.

1. Power On/Off: Press and hold the power button (center button) for 2 seconds to turn the device on or off. The LED display will illuminate.
2. Adjust Vibration: Press the vibration button (left button) to cycle through 3 levels of vibration intensity: Slow, Intermittent, and Sustained.
3. Adjust Heat: Press the heat button (right button) to cycle through 3 levels of heating temperature: Low (118.4°F), Medium (127.4°F), and High (136.4°F).
4. Automatic Timer: The device automatically shuts off after 15 minutes of continuous use to prevent overuse.

For a visual guide on operation, please watch the instructional video below:

7. Charging and Battery

• The device is equipped with a long-lasting lithium battery.
• Charge the device using the provided USB Type-C cable.
• Connect the cable to a laptop, power bank, or phone adapter.
• A single charge provides multiple sessions of use.

8. Maintenance

• The premium fabric is durable and easy to wipe clean.
• Wipe the surface with a damp cloth and mild soap if necessary.
• Do not machine wash or tumble dry.
• Ensure the device is completely dry before storing or recharging.

9. Troubleshooting

• Device not turning on: Ensure the battery is charged. Press and hold the power button for at least 2 seconds.
• No heat or vibration: Check if the respective function buttons have been pressed. Ensure the device is powered on.
• Charging issues: Verify the USB Type-C cable is securely connected to both the device and the power source. Try a different power adapter or USB port.
• Discomfort during use: Discontinue use immediately. Adjust the heat or vibration intensity to a lower setting, or ensure the brace is not too tight.

10. Specifications

11. Warranty and Support

For warranty information or product support, please contact the seller directly through your purchase platform. Ensure you have your order number and product model (CL-2888) available for faster assistance.