Introduction
This manual provides detailed instructions for the installation, setup, operation, and maintenance of your Ulecoce U68RG-W Keyless Entry Door Lock with Handle Set. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: Front view of the Ulecoce Keyless Entry Door Lock with Handle Set.
Product Features
- 4-in-1 Unlocking: Supports APP/remote, fingerprint, passcode, and 5 backup physical keys for versatile access.
- App Remote Control: Manage access, generate various password modes (one-time, time-limited, recurring), check real-time logs, and remotely unlock via the app.
- Auto-Lock & One-Touch Lock: Customizable 5-60 second auto-lock feature and instant one-touch locking from inner/outer keypads.
- ANSI/BHMA Grade 3 Security: Features anti-peep passwords, 5-wrong-attempt lockout, and an anti-pick cylinder for enhanced security.
- IP54 Weatherproof & Durable: Constructed from zinc-alloy, resistant to dust and moisture, suitable for indoor and outdoor use in various weather conditions.
- Long Battery Life: Operates for 6+ months on 4 AA batteries (not included) with low-power WiFi. Includes low-battery alerts and a Type-C power bank backup unlock option.
Image: Overview of the multiple unlocking methods available with the Ulecoce smart lock.
Package Contents
Verify that all components are present before beginning installation:
Image: All components included in the Ulecoce Keyless Entry Door Lock package.
- Exterior Keypad Assembly
- Interior Assembly
- Door Handle Set
- Deadbolt Latch
- Strike Plate
- Mounting Screws
- Physical Keys (5)
- Installation Template
- User Manual
Specifications
| Feature | Detail |
|---|---|
| Brand | Ulecoce |
| Model Number | U68RG-W |
| Dimensions (L x W x H) | 2.7 x 1.32 x 5 inches |
| Item Weight | 3.5 pounds (1.59 Kilograms) |
| Connectivity | Wi-Fi |
| Power Source | 4 AA Batteries (not included) |
| Security Standard | ANSI/BHMA Grade 3 |
| Weather Resistance | IP54 |
Pre-Installation Checks
Before installing the lock, ensure your door meets the following requirements:
- Door thickness: 1-3/8 inches to 2-1/8 inches (35mm-55mm).
- Backset: 2-3/8 inches or 2-3/4 inches (60mm or 70mm).
- Hole diameter: 2-1/8 inches (54mm).
- Minimum distance between holes: ≥4 inches (101.6mm).
Image: Door measurement guide for proper lock installation.
Ensure the door frame is properly prepared for the strike plate.
Installation Guide
Installation typically requires only a screwdriver. Follow these steps carefully:
- Install the deadbolt latch into the door edge. Ensure the latch is oriented correctly for your door's handing.
- Install the exterior keypad assembly. Feed the cable through the door hole. Ensure the lock cylinder is straight and screws are tightened securely but not over-tightened.
- Install the interior mounting plate. Connect the cable from the exterior assembly to the interior plate.
- Attach the interior assembly. Ensure the power cord is not entangled and the lock is not crooked.
- Install the door handle set according to its separate instructions.
Image: Installation overview, emphasizing ease of installation.
For detailed visual guidance on specific installation steps, refer to the troubleshooting videos below, which also cover common installation errors.
Initial Setup & Programming
After physical installation, the lock needs to be set up and programmed.
1. App Pairing Guide
To utilize the smart features, download the Ulecoce app and pair your lock:
Image: Steps for pairing the smart lock with the mobile application.
- Ensure your phone's Wi-Fi is enabled.
- Open the Ulecoce app and select "Add Device".
- Follow the on-screen prompts to connect your lock to your home Wi-Fi network.
- Once connected, the app will confirm successful pairing.
2. Creating Passcodes and Fingerprints
The app allows for various access methods:
Image: Passcode setting options for different user types.
- Master Passcode: Set your primary access code through the app. This code is required for initial setup and managing other settings.
- User Passcodes: Create permanent, one-time, or time-limited passcodes for family, guests, or service providers.
- Fingerprints: Register up to 50 fingerprints for quick and secure access. The lock features 0.3s biometric identification with a 99.9% recognition rate.
- Anti-Peep Passwords: Enhance security by entering random digits before or after your actual passcode.
Image: Details of the fingerprint recognition technology.
Operating Instructions
Unlocking Methods
- Fingerprint: Place your registered finger on the sensor.
- Passcode: Enter your passcode on the keypad, optionally with anti-peep digits.
- App Remote: Use the Ulecoce app to unlock the door remotely.
- Physical Key: Use one of the backup keys in case of electronic failure or dead batteries.
Image: Unlocking the door using a passcode.
Image: Using a backup mechanical key for access.
Auto-Lock Feature
The lock can be configured to automatically lock after a set period (5-60 seconds). This feature can be adjusted via the app.
Image: Auto-lock setting illustration.
Silent Mode
The keypad beeping sounds can be muted for a noise-free environment. This setting is available in the app.
Image: Silent mode feature.
Entry Records
The app provides a detailed history of all unlocking events, offering peace of mind and monitoring capabilities.
Image: App interface showing entry records.
Maintenance
Battery Replacement
The lock is powered by 4 AA batteries (not included) and offers over 6 months of battery life. The app and keypad will provide low-battery alerts.
Image: Low battery alert and emergency Type-C power option.
- When low battery alerts appear, replace all four AA batteries promptly.
- In case of complete battery depletion, use a Type-C power bank to temporarily power the lock and gain access.
Cleaning
Wipe the lock's exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
Troubleshooting
If you encounter issues with your Ulecoce smart lock, refer to the following common problems and solutions:
Lock Cylinder Malfunction
If the lock cylinder does not retract fully or operates with resistance, it may be due to loose screws or quality issues. Ensure the screws securing the lock cylinder are tightened correctly and the cylinder is straight.
Video: Troubleshooting guide for lock cylinder malfunctions, including causes like loose screws and solutions for proper alignment and tightening.
Resetting the Lock
If you need to perform a factory reset, follow these steps:
Video: Instructions on how to reset the Ulecoce smart door lock using the reset button.
- Keep the door open and unlocked.
- Locate the reset button on the interior assembly (often behind the battery cover).
- Press and hold the reset button until you hear beeps and the indicator light turns blue, then green, accompanied by a "Factory reset successful" voice prompt.
- After resetting, you will need to reprogram the lock, starting with the initial setup to create a new master password.
If issues persist, please contact customer support.
Warranty Information
The Ulecoce Keyless Entry Door Lock with Handle Set typically comes with a 3-year warranty. Please refer to your product packaging or the official Ulecoce website for the most current and detailed warranty terms and conditions.
Customer Support
For further assistance, technical support, or warranty claims, please contact Ulecoce customer service through their official website or the contact information provided in your product packaging.
