Introduction
This manual provides essential information for the installation, operation, and maintenance of your Galax GeForce RTX 5050 1-Click OC 8GB GDDR6 Graphics Card. This GPU is designed to deliver advanced performance for gaming, AI workloads, and content creation, leveraging the NVIDIA Blackwell architecture. It features 8GB GDDR6 memory, a 128-bit interface, and a boost clock up to 2587 MHz (2602 MHz with 1-Click OC).
Key features include:
- Next-Gen NVIDIA Blackwell Architecture: For improved performance and efficiency.
- 8GB GDDR6 Memory: High-speed 20 Gbps memory for smooth gaming and content creation.
- AI & Ray Tracing Ready: Equipped with Tensor Cores and RT Cores for DLSS 4 and real-time ray tracing.
- 1-Click OC Performance: Boost clock up to 2602 MHz using Xtreme Tuner software.
- Advanced Cooling System: Dual 92mm WINGS 3.0 fans with dual 6mm heat pipes.
- PCIe 5.0 Interface: Faster data transfer and future-ready compatibility.
- Multi-Display Support: 2 × DisplayPort 2.1b and 2 × HDMI 2.1b.
Setup
1. Physical Installation
Before installation, ensure your computer is powered off and unplugged from the wall outlet. Open your computer case and locate an available PCI Express 5.0 x16 slot on your motherboard.
Image: Galax GeForce RTX 5050 Graphics Card, front view with dual fans and 'GEFORCE RTX' branding. This image shows the overall design of the graphics card, including its dual fan cooling system and the 'GEFORCE RTX' logo.
- Carefully insert the graphics card into the PCI Express x16 slot until it is fully seated.
- Secure the card to the chassis with the retaining screw.
- Connect any required power cables from your power supply unit (PSU) to the graphics card. Refer to your PSU manual for specific power connector types.
- Close your computer case and reconnect all peripherals.
2. Driver Installation
After physical installation, power on your computer. The operating system may install a basic display driver. For full functionality and optimal performance, you must install the latest NVIDIA Game Ready Drivers.
- Visit the official NVIDIA website (nvidia.com/drivers).
- Select your product type (GeForce), product series (RTX 50 Series), and product (RTX 5050).
- Download the latest Game Ready Driver for your operating system (Windows 10 64-bit or later).
- Run the downloaded installer and follow the on-screen instructions. A system restart may be required.
3. Software Installation
For advanced monitoring and overclocking features, install the GALAX Xtreme Tuner software.
- Download the Xtreme Tuner software from the official Galax website.
- Install the software and launch it.
Operating Instructions
1. Basic Operation
Once the drivers are successfully installed, your Galax GeForce RTX 5050 graphics card will function automatically. Connect your display(s) to the available output ports.
Image: Side view of the Galax GeForce RTX 5050 Graphics Card, showing DisplayPort and HDMI output connectors. This image illustrates the available video output ports for connecting displays.
2. 1-Click OC Feature
The 1-Click OC feature allows for an instant performance boost, increasing the boost clock up to 2602 MHz.
- Launch the GALAX Xtreme Tuner software.
- Locate the '1-Click OC' option within the software interface.
- Click to activate the overclocking profile. For mobile control, ensure your PC and mobile device are connected to the same WiFi network.
3. Multi-Display Setup
The graphics card supports up to four displays simultaneously.
- Connect your monitors to the available 2 × DisplayPort 2.1b and 2 × HDMI 2.1b ports.
- Configure your display settings through your operating system's display settings or the NVIDIA Control Panel for extended desktop, duplicate displays, or other configurations.
Maintenance
1. Cooling System
The dual 92mm WINGS 3.0 fans are designed for efficient heat dissipation. They feature a fan stop function, which means the fans will cease operation during low workloads to ensure silent performance. The fans will automatically activate when the GPU temperature rises under load.
Image: Top-down view of the Galax GeForce RTX 5050 Graphics Card, highlighting the dual 92mm WINGS 3.0 fans. This image provides a clear view of the cooling fans and their design.
2. Cleaning
To maintain optimal cooling performance and extend the lifespan of your graphics card, periodic cleaning is recommended.
- Ensure your computer is powered off and unplugged before cleaning.
- Carefully remove any accumulated dust from the fan blades and heatsink fins using compressed air. Hold the fans gently to prevent them from spinning rapidly during cleaning.
- Avoid using liquid cleaners directly on the card.
Troubleshooting
No Display Output
- Verify that the graphics card is fully seated in the PCI Express slot.
- Ensure all required power cables from the PSU are securely connected to the graphics card.
- Check that your monitor is connected to the graphics card's output ports and not the motherboard's integrated graphics ports.
- Confirm your monitor is set to the correct input source (e.g., HDMI 1, DisplayPort 2).
- Test with a different display cable or monitor if possible.
Performance Issues (Low FPS, Stuttering)
- Ensure you have the latest NVIDIA Game Ready Drivers installed.
- Monitor GPU temperatures and clock speeds using the GALAX Xtreme Tuner software. Overheating can lead to performance throttling.
- Verify that your system's power supply unit (PSU) meets the recommended wattage for the graphics card and your overall system.
- Check for background applications consuming system resources.
- Ensure your operating system and games are up to date.
Specifications
| Feature | Specification |
|---|---|
| Graphics Coprocessor | NVIDIA GEFORCE RTX 5050 |
| Brand | Galax |
| Graphics RAM Size | 8 GB |
| GPU Clock Speed | 2587 MHz (Boost), 2602 MHz (1-Click OC) |
| Video Output Interface | DisplayPort, HDMI (2x DisplayPort 2.1b, 2x HDMI 2.1b) |
| Graphics RAM Type | GDDR6 |
| Compatible Devices | Desktop |
| Graphics Card Interface | PCI-Express x16 (PCIe 5.0) |
| Memory Clock Speed | 20 Gbps |
| Memory Bandwidth | 320 GB/s |
| GPU Series | NVIDIA RTX 50 Series |
| Maximum Display Resolution | 7680 x 4320 Pixels |
| Minimum Required Operating System | Windows 10 64-bit |
| Item Dimensions (L x W) | 23L x 12.9W Centimeters (With Bracket: 234 × 129.5 × 40.6 mm) |
| Model Name | GeForce RTX 5050 1-Click OC |
| Model Number | 55NSL8MHDCHD |
| Cooling System | Dual 92mm WINGS 3.0 Fans, Dual 6mm Heat Pipes, Fan Stop at Idle |
| Box Contents | VIDEO CARD |
Warranty Information
This Galax GeForce RTX 5050 1-Click OC Graphics Card is covered by a 3-year manufacturer warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.
For detailed terms and conditions, please refer to the official Galax warranty policy or contact your local distributor.
Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Galax customer support or your authorized local distributor.
Manufacturer Contact Information:
Technology And Gadgets
Gala no.142/143, 1st Floor, Building no.6
Mittal Industrial Estate, Marol, Andheri (East)
Mumbai - 400059, Mumbai, India, Maharashtra
You can also visit the official Galax website for driver downloads, software updates, and additional support resources.
