DAMOACAM QHD 2K Indoor Security Camera Instruction Manual

1. Introduction

This manual provides detailed instructions for the operation and maintenance of your DAMOACAM QHD 2560x1440P 2K Indoor Security Camera. Designed for discreet surveillance, this device captures high-resolution video without audio, ensuring privacy compliance. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

2. What's Included

Verify that all items are present in your package:

• DAMOACAM QHD 2K Security Camera (Pen Body)
• USB-C Charging Cable
• Two (2) Refillable Pen Cartridges
• One (1) 64GB MicroSD Card (pre-installed or separate)
• Pen Holder
• Stand
• Card Removal Tool (SIM ejector tool style)
• USB Flash Drive (for MicroSD card)

Image: Contents of the DAMOACAM QHD 2K Security Camera package, showing the pen, two ballpoint refills, a pen mount, a Type-C cable, and a 64GB SD card.

3. Product Overview

The DAMOACAM QHD 2K Security Camera is designed for discreet video capture in various indoor settings. Its compact pen-like form factor integrates advanced recording capabilities with ease of use.

Key Features:

• Ultra HD QHD 2560x1440 Video Capture: Records clear 2K QHD video with sharp detail.
• Discreet Hidden Lens Design: Fully concealed lens for covert recording without attracting attention.
• Expandable Storage: Supports microSD cards up to 256GB (64GB card included).
• No Audio Recording: Designed to capture visuals only for privacy compliance.
• Wide-Angle Shooting: 80-degree wide-angle lens to capture a broader area.
• USB Type-C Recharging: Convenient and fast charging.

Image: Visual comparison showing the clarity of QHD 2560x1440p resolution compared to FHD 1920x1080, with a cat's face as an example.

Image: Diagram illustrating the 80-degree wide-angle shooting capability of the DAMOACAM camera compared to a typical 40-degree lens.

Image: Exploded view of the pen camera, highlighting the pen tip, USB Type-C charging port, Micro SD card slot, encased lens (QHD-2560x1440p), and power button.

4. Setup

4.1. Initial Charging

Before first use, fully charge the camera pen. Connect the provided USB-C charging cable to the pen's charging port and a 5V USB charger or computer. The indicator light will turn red while charging and blue when fully charged. A full charge typically takes about 2 hours.

Image: Instructions for inserting the Micro SD card and connecting the USB Type-C cable for recharging the pen camera.

4.2. Inserting/Removing MicroSD Card

1. Gently twist the pen body to separate the two halves.
2. Locate the MicroSD card slot.
3. Insert the provided 64GB MicroSD card (or your own up to 256GB) into the slot until it clicks into place. Ensure correct orientation.
4. To remove, gently press the card until it springs out.
5. Reassemble the pen by twisting the halves back together.

5. Operating Instructions

5.1. Power On/Off

• Power On: Press and hold the top function button for 2-3 seconds until the blue indicator light comes on. The light will flash three times and then turn off, indicating recording has started.
• Power Off: While recording or in standby mode, press and hold the top function button until the blue indicator light goes out. This will save the current recording and power off the device.

5.2. Video Recording

• Start Recording: After powering on, the device automatically begins video recording once the blue indicator light flashes three times and turns off.
• End Recording: Press the top function button once to stop recording and save the video. The blue light will illuminate, indicating standby mode.

5.3. Photo Capture

• While in standby mode (blue light solid), double-press the top function button. The blue indicator light will flash once, indicating a photo has been taken and saved.

5.4. Writing Function

The device functions as a regular ballpoint pen. Rotate the pen tip clockwise to extend the ballpoint for writing. Rotate counter-clockwise to retract it.

6. Data Transfer

To access your recorded videos and photos:

1. Power off the camera pen.
2. Connect the camera pen to your computer using the provided USB-C cable. The device should appear as a removable disk.
3. Alternatively, remove the MicroSD card from the pen and insert it into the provided USB flash drive. Then, plug the USB flash drive into your computer.
4. Navigate to the device's storage to view and transfer your files. Videos are typically saved in AVI format and photos in JPG format.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the pen. Avoid liquid cleaners.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Ink Refill Replacement: To replace the pen's ink cartridge, twist the pen tip counter-clockwise to remove it. Insert a new refill and twist clockwise to secure.

8. Troubleshooting

• Device not turning on: Ensure the battery is fully charged. Connect to a power source and check the indicator light.
• Recording issues: Check if the MicroSD card is correctly inserted and has sufficient free space. Ensure the device is powered on and the indicator light behaves as expected for recording.
• Files not appearing on computer: Ensure the pen is properly connected via USB-C or the MicroSD card is correctly inserted into the USB flash drive and then into the computer. Try a different USB port or cable.
• Device unresponsive (crash): If a crash occurs while recording, the top button may become invalid. Press the Reset button (located in one of the small holes, refer to the diagram in the included paper manual for exact location) for an emergency restart. The device will resume normal operation.

9. Specifications