Yofidra 4-in-1 Cordless Pruning Kit User Manual

1. Introduction

This Yofidra 4-in-1 Cordless Pruning Kit is designed for efficient garden maintenance, offering versatility with its interchangeable tools. It includes a battery-powered pruning shear, a mini chainsaw, and a telescopic pole for extended reach, allowing you to tackle various pruning and cutting tasks with ease. Please read this manual thoroughly before operation to ensure safe and effective use.

This image illustrates the versatility of the Yofidra 4-in-1 Cordless Pruning Kit, highlighting its use as electric pruning shears for close-up work, and as a pole saw for reaching higher branches. It demonstrates how the various components can be combined for different gardening tasks.

2. Safety Instructions

Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury.

• Personal Protective Equipment: Always wear safety glasses, hearing protection, and heavy-duty gloves. A hard hat and face shield are recommended when working overhead.
• Work Area: Keep the work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Electrical Safety: Avoid body contact with earthed or grounded surfaces. Do not expose power tools to rain or wet conditions.
• Tool Use and Care: Do not force the tool. Use the correct tool for your application. Disconnect the battery pack before making any adjustments, changing accessories, or storing power tools.
• Battery Safety: Use only the specified charger for the battery pack. Do not incinerate or mutilate battery packs.
• Children and Bystanders: Keep children and bystanders away while operating a power tool.

3. Package Contents

Verify that all items are present and in good condition upon unpacking:

• 1 x Battery-powered Pruning Shears (25mm)
• 1 x 6-inch Mini Chainsaw
• 1 x Telescopic Pole (2m, 4 sections)
• 2 x 20V 3.0Ah Lithium-ion Batteries
• 1 x Battery Charger
• 1 x User Manual
• Necessary accessories (e.g., chain, blade cover, tools for assembly)

4. Setup

4.1 Charging the Batteries

1. Insert the battery pack into the charger.
2. Plug the charger into a standard power outlet.
3. Allow the batteries to charge fully before first use. The charger indicator light will change when charging is complete.

4.2 Assembling the Telescopic Pole

The telescopic pole consists of 4 sections, allowing for adjustable lengths.

1. To extend the pole, twist the locking collars counter-clockwise to loosen.
2. Pull out the sections to the desired length (1m, 1.57m, or 2m).
3. Twist the locking collars clockwise to securely fasten each section. Ensure all sections are firmly locked before use.

This diagram details the adjustable lengths of the telescopic pole (100 cm, 157 cm, 200 cm) and the maximum working reach of up to 236.5 cm (93 inches) when combined with either the chainsaw or pruning shears. It also shows the connector for attaching the tools to the pole.

4.3 Attaching Tools to the Pole or Main Unit

1. Ensure the battery is removed from the tool before attachment.
2. Align the connector on the pruning shears or mini chainsaw with the connector on the telescopic pole or the main handle unit.
3. Push firmly until it clicks into place. Ensure the connection is secure.
4. To detach, press the release button (if present) and pull the tool away.

5. Operating Instructions

5.1 Using the 25mm Cordless Pruning Shears

These shears are ideal for cutting branches up to 25mm in diameter.

1. Insert a charged battery into the shears.
2. Press the power button to activate the shears. The LCD display will show battery level and cut count.
3. Position the blade around the branch you wish to cut. Ensure your hands are clear of the cutting area.
4. Squeeze the trigger to close the blades and make a clean cut.
5. After use, remove the battery and engage the safety lock.

This image demonstrates the Yofidra electric pruning shears in action, cutting a branch. It highlights the maximum cutting diameter of 25mm, suitable for various small to medium-sized branches.

5.2 Using the 6-inch Mini Chainsaw

The mini chainsaw is suitable for branches up to 15 cm in diameter.

1. Ensure the chain is properly tensioned and lubricated (see Maintenance section).
2. Insert a charged battery into the chainsaw.
3. Hold the chainsaw firmly with both hands.
4. Engage the safety switch and then press the trigger to start the chain.
5. Allow the chain to reach full speed before making contact with the branch.
6. Apply light pressure and let the saw do the work. Avoid forcing the saw.
7. After use, remove the battery and engage the chain brake/safety.

The Yofidra 6-inch mini chainsaw is shown cutting a tree branch, illustrating its compact size and effectiveness for larger pruning tasks. The image also indicates a high chain speed of 32.8 ft/s.

5.3 Using Tools with the Telescopic Pole

When using either the pruning shears or mini chainsaw with the telescopic pole:

1. Ensure the tool is securely attached to the pole and the pole sections are locked.
2. Adjust the pole length as needed for the task.
3. To adjust the cutting angle, press the adjusting button and rotate the tool head to the desired angle (up to 180 degrees). Release the button to lock the angle. Ensure the safety lock is engaged.
4. Maintain a stable stance and keep a safe distance from the cutting area.
5. Always be aware of falling branches.

This image shows a user adjusting the 180-degree angle of the tool head when attached to the telescopic pole. It highlights the adjusting button and safety lock mechanism, allowing for flexible cutting positions for overhead or hard-to-reach branches.

6. Maintenance

6.1 Cleaning

• Always remove the battery before cleaning.
• Clean the blades of the pruning shears and the chain/bar of the chainsaw after each use to remove sap, debris, and dirt.
• Use a damp cloth to wipe down the tool body. Do not use harsh chemicals or abrasive cleaners.

6.2 Chainsaw Lubrication

The mini chainsaw features an automatic lubrication system. Ensure the oil reservoir is filled with appropriate chain oil before each use. Regularly check the oil level during extended operation.

6.3 Blade and Chain Care

• Regularly inspect pruning shear blades for sharpness and damage. Sharpen or replace as needed.
• Check chainsaw chain tension before each use. Adjust if too loose or too tight.
• Inspect the chainsaw chain for dullness or damage. A dull chain will cut inefficiently and can cause kickback. Sharpen or replace the chain as necessary.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for warranty claims.