Belkin BBB010-BK

Belkin UltraCharge 2-in-1 Magnetic Wireless Charging Stand (Model BBB010-BK) User Manual

Model: BBB010-BK

1. Introduction

This manual provides instructions for the safe and efficient use of your Belkin UltraCharge 2-in-1 Magnetic Wireless Charging Stand. This device is designed to simultaneously charge compatible smartphones and wireless earbuds, offering a convenient and clutter-free charging solution.

Belkin UltraCharge 2-in-1 Foldable Magnetic Charger 25W

Image 1.1: Belkin UltraCharge 2-in-1 Foldable Magnetic Charging Stand in use.

2. Package Contents

Verify that all items listed below are present in your product packaging:

  • 1 x Belkin UltraCharge 2-in-1 Convertible Magnetic Charging Stand
  • 1 x 45W USB-C Power Supply Unit
  • 1 x 60W 5ft / 1.5M USB-C to USB-C Cable
Belkin 2-in-1 Charging Station with phone, earbuds, power adapter, and USB-C cable

Image 2.1: All components included in the package.

3. Product Overview

The Belkin UltraCharge 2-in-1 Magnetic Wireless Charging Stand features a magnetic charging surface for smartphones, a Qi charging pad for earbuds, and an additional USB-C port for other accessories. Its foldable design enhances portability and allows for adjustable viewing angles.

Key Features:

  • Qi2.2 25W Magnetic Wireless Charging: Provides fast wireless charging for compatible smartphones.
  • 5W Qi Charging Pad: Dedicated charging area for wireless earbuds.
  • 5W USB-C Port: For charging additional devices like smartwatches.
  • Foldable Design: Allows for compact storage and portability.
  • Adjustable Viewing Angle: Supports both portrait and landscape modes up to 65 degrees.
  • ChillBoost™ Passive Cooling Technology: Manages heat for optimal charging performance and device protection.
  • Belkin SmartProtect: Integrated safety features for device protection.
Overview of Belkin 2-in-1 Wireless Charger features including 25W fast charging, USB-C port, and included power supply.

Image 3.1: Overview of the charging stand's features.

4. Setup Instructions

Follow these steps to set up your charging stand:

  1. Connect the Power Adapter: Insert the USB-C end of the provided 60W USB-C to USB-C cable into the 'IN' port on the charging stand.
  2. Plug into Power: Connect the other end of the USB-C cable to the 45W USB-C Power Supply Unit. Plug the power supply unit into a wall outlet.
  3. Unfold the Stand: Gently unfold the magnetic charging stand to your desired upright position. The stand can be adjusted to various angles for optimal viewing.
Before and after image showing how the Belkin charging stand reduces cable clutter.

Image 4.1: Example of a clutter-free charging setup.

5. Operating Instructions

5.1 Charging a Smartphone

  1. Ensure the charging stand is powered on.
  2. Place your compatible smartphone (iPhone 12 series or later, Pixel 10, etc.) onto the magnetic charging surface. The magnets will align your device for optimal charging.
  3. The phone can be charged in either portrait or landscape orientation. Adjust the stand angle as needed for viewing.
  4. Fast charging up to 25W is supported for Qi2 compatible devices running iOS 26 or newer.
Smartphone charging wirelessly on the Belkin stand, highlighting 25W fast charging.

Image 5.1: Smartphone charging on the magnetic stand.

5.2 Charging Wireless Earbuds

  1. Place your wireless earbud case (e.g., AirPods 3rd/4th Gen, AirPods Pro 2nd/3rd/4th Gen) onto the flat Qi charging pad located at the base of the stand.
  2. Ensure the earbud case is centered on the charging pad for proper connection.
AirPods charging on the base of the Belkin wireless charger.

Image 5.2: Earbuds charging on the base pad.

5.3 Charging Other Accessories (USB-C Port)

  1. Connect a USB-C charging cable (not included for the accessory) to the 5W USB-C output port on the side of the charging stand.
  2. Connect the other end of the cable to your accessory, such as a smartwatch.
Man using the Belkin charging stand to charge a smartwatch via the USB-C port.

Image 5.3: Charging a smartwatch using the auxiliary USB-C port.

5.4 Foldable and Adjustable Design

  • The stand can be folded flat for easy storage and travel.
  • Adjust the angle of the magnetic charging surface to suit your viewing preference, whether in portrait or landscape mode.
Belkin charging stand folded for travel and dimensions shown.

Image 5.4: Folded stand for portability and dimensions.

6. Maintenance

To ensure the longevity and optimal performance of your charging stand:

  • Cleaning: Disconnect the power adapter before cleaning. Use a soft, dry, lint-free cloth to wipe the surfaces. Avoid using abrasive cleaners, solvents, or aerosol sprays.
  • Storage: When not in use, especially during travel, fold the stand flat to protect the charging surfaces.
  • Environmental Conditions: Avoid exposing the charger to extreme temperatures, humidity, or direct sunlight.
Close-up of the Belkin charging stand showing soft-touch silicone and stable non-slip base.

Image 6.1: The soft-touch silicone and stable base design.

7. Troubleshooting

If you encounter issues with your charging stand, refer to the following common problems and solutions:

ProblemPossible Solution
Device not charging wirelessly.
  • Ensure the power adapter is securely connected to both the stand and the wall outlet.
  • Verify your device is compatible with Qi2 wireless charging (for magnetic pad) or Qi wireless charging (for base pad).
  • Remove any thick phone cases (over 3mm) or cases that are not MagSafe compatible.
  • Ensure the device is properly aligned on the charging surface.
Slow charging speed.
  • Confirm your device supports 25W Qi2 fast charging (e.g., iPhone with iOS 26 or newer).
  • Ensure you are using the provided 45W power adapter and cable.
  • Avoid charging in excessively warm environments, as high temperatures can reduce charging efficiency.
Charger lifts when removing phone.
  • Use two hands to detach the phone, or slide the phone off the magnetic surface rather than pulling directly upwards.
  • Ensure the stand is placed on a stable, non-slip surface.
Device or charger feels warm.
  • Some warmth during wireless charging is normal. The ChillBoost™ technology helps manage heat.
  • If the device or charger becomes excessively hot, discontinue use and contact support.
Diagram illustrating Belkin SmartProtect safety features including temperature monitoring, over-voltage protection, and fire resistant materials.

Image 7.1: Belkin SmartProtect safety features.

8. Specifications

  • Model Number: BBB010-BK
  • Wireless Charging Output (Magnetic): Up to 25W (Qi2.2 MPP certified)
  • Wireless Charging Output (Base Pad): 5W (BPP Qi)
  • USB-C Output Port: 5W
  • Input Voltage: 15 Volts
  • Included Power Adapter: 45W USB-C Power Supply Unit
  • Included Cable: 60W 5ft / 1.5M USB-C to USB-C cable
  • Dimensions (Folded): Approximately 4.69 x 4.45 x 2.91 inches
  • Item Weight: 12.1 ounces
  • Compatibility:
    • Smartphones: iPhone 17 Pro Max, iPhone 17 Pro, iPhone 17 Air, iPhone 17, iPhone 16 Pro Max, iPhone 16 Pro, iPhone 16 Plus, iPhone 16, iPhone 15 Series, iPhone 14 Series, iPhone 13 Series, iPhone 12 Series, Google Pixel 10 Pro XL.
    • Earbuds: AirPods 4th Gen, AirPods 3rd Gen, AirPods Pro 2nd Gen, AirPods Pro 3rd Gen, AirPods Pro 4th Gen.
    • Other Devices (via USB-C port): Smartwatches and other USB-C powered accessories (requires separate cable/dongle).
  • Material: Housing made of a minimum of 85% post-consumer recycled plastic (excluding cable and power adapter).
Compatibility chart for Belkin charger showing iPhone 12 series and later, and various AirPods models.

Image 8.1: Device compatibility overview.

9. Warranty & Support

This Belkin UltraCharge 2-in-1 Magnetic Wireless Charging Stand comes with a 2-year warranty. Belkin also offers a Connected Equipment Warranty (CEW) of up to $2,500, which covers electronic devices damaged by an electrical charge while properly connected to this product.

For detailed warranty information and to register your product, please visit the official Belkin website or refer to the warranty card included in your package.

For technical support or customer service, please visit belkin.com/support.

Graphic showing a safe and the number 2, representing 2-year coverage and product protection.

Image 9.1: Belkin 2-Year Product Coverage.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.