1. Introduction
Thank you for purchasing the Movclstud SG-508 Cordless Electric Vacuum Pump. This portable, USB rechargeable device is designed to efficiently remove air from vacuum storage bags, helping you save space when storing clothing, blankets, and bedding. It is ideal for both travel and home organization. Please read this manual carefully before use to ensure proper operation and maintenance.
Image: The Movclstud SG-508 pump is compact and lightweight, designed for easy portability and use in various settings, including home storage and travel.
2. Safety Information
- Do not immerse the pump in water or other liquids.
- Keep the device away from children.
- Do not operate the pump if it is damaged or malfunctioning.
- Use only the provided charging cable or a compatible USB Type-C cable.
- Avoid blocking the air intake or exhaust ports during operation.
- The pump features an automatic shut-off after 2 minutes to prevent overheating. Allow the device to cool down if it shuts off unexpectedly during prolonged use.
3. Package Contents
Please check the package for the following items:
- Movclstud SG-508 Cordless Electric Vacuum Pump
- USB Type-C Charging Cable
- User Manual
Note: Vacuum storage bags are not included with this product.
4. Product Overview
Familiarize yourself with the components of your Movclstud SG-508 vacuum pump:
- Power Button: Used to turn the pump on and off.
- LED Light Power Indicator: Displays the battery charge level and operating status.
- Type-C Charging Port: For connecting the USB charging cable.
- Air Intake Port: The bottom part of the pump that connects to the vacuum bag valve.
Image: The pump features a clear power indicator for easy monitoring of its status.
Image: The SG-508 utilizes a powerful 6.0 kPa turbo suction with an upgraded coreless electric pump for efficient air removal.
5. Charging the Device
The Movclstud SG-508 is equipped with a 1500mAh rechargeable battery. Before first use, fully charge the pump.
- Locate the Type-C charging port on the side of the pump.
- Connect the provided USB Type-C cable to the pump's charging port.
- Connect the other end of the USB cable to a compatible power source, such as a USB adapter, laptop, power bank, or car charger.
- The LED power indicator lights will show the charging status. Once fully charged, the indicator lights will typically show a steady full charge.
A full charge provides power for up to 80 uses, depending on the bag size and duration of use.
Image: The Type-C charging port allows for flexible charging using common USB power sources.
6. Setup
Before operating the vacuum pump, ensure your vacuum storage bag is ready:
- Place your items (clothing, blankets, etc.) neatly inside the vacuum storage bag.
- Seal the bag completely using its zipper or closure mechanism, leaving only the air valve open.
- Ensure the vacuum bag valve is clean and free from any obstructions. The Movclstud SG-508 is compatible with most vacuum storage bags with a valve diameter of 1.8 inches or less.
7. Operating Instructions
Follow these steps to use your Movclstud SG-508 vacuum pump:
- Place the Movclstud SG-508 pump directly onto the air valve of the vacuum storage bag, ensuring a tight seal.
- Press the power button on the pump to start the vacuuming process. The pump will begin to remove air from the bag.
- Hold the pump firmly in place until the desired level of compression is achieved. The pump can remove air in as little as 10-30 seconds, depending on bag size.
- The pump will automatically shut off after approximately 2 minutes of continuous operation to prevent overheating. If more vacuuming is needed, you can restart it after a brief pause.
- Once the air is removed, remove the pump from the valve and immediately close the valve cap on the storage bag to maintain the vacuum seal.
Image: The pump efficiently compresses items. A 1500mAh battery supports multiple uses per charge, with varying times based on bag size.
| Bag Size | Pumping Time (Sec/Bag) | Bags/Charge (Approx.) |
|---|---|---|
| Jumbo | 30 | 40 |
| Large | 20 | 50 |
| Medium | 15 | 55 |
| Small | 10 | 60 |
8. Maintenance
- Cleaning: Wipe the exterior of the pump with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the pump in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, charge the pump regularly, even if not in frequent use. Avoid fully discharging the battery for extended periods.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not turn on. | Battery is discharged. | Charge the pump using the USB Type-C cable. |
| Weak suction or no air removal. | Poor seal between pump and bag valve. | Ensure the pump is firmly pressed onto the bag valve and the bag is fully sealed. |
| Bag valve is obstructed or dirty. | Clean the bag valve and ensure no items are blocking it. | |
| Pump stops during operation. | Automatic shut-off due to 2-minute limit or overheating. | Allow the pump to cool down for a few minutes, then restart if necessary. |
| Battery is low. | Recharge the pump. |
10. Specifications
| Feature | Detail |
|---|---|
| Brand | Movclstud |
| Model Number | SG-508 |
| Dimensions (L x W x H) | 140 mm x 43 mm x 33 mm (5.51 x 1.77 x 1.3 inches) |
| Weight | 113 g (0.25 lbs) |
| Color | Gray |
| Suction Power | 60 Kpa (6.0 kPa) |
| Battery Capacity | 1500 mAh |
| Charging Port | USB Type-C |
| Automatic Shut-off | After 2 minutes |
| Compatibility | Most vacuum storage bags with valve ≤ 1.8 inches |
Image: Detailed dimensions of the Movclstud SG-508 pump.
11. Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Movclstud website. Keep your purchase receipt as proof of purchase for any warranty claims.