Lafocuse LED Digital Alarm Clock (Model ZH0154D) Instruction Manual

1. Product Overview

The Lafocuse LED Digital Alarm Clock features a 6.7-inch display, multiple power options, and various functions including time, date, temperature display, adjustable brightness, and alarm settings with snooze. It is designed for clear visibility and ease of use in bedrooms, offices, or other living spaces.

Image: Front view of the Lafocuse LED Digital Alarm Clock displaying time and icons representing its features like voice control, alarm, brightness, date, temperature, battery/cord power, snooze, and 12/24H mode.

2. Package Contents

• Lafocuse LED Digital Alarm Clock (Model ZH0154D)
• USB Power Cable
• User Manual (this document)

Note: 3 AAA batteries are required for battery-powered operation and are not included in the package.

3. Controls and Display

Familiarize yourself with the buttons and ports on your alarm clock:

Image: Rear view of the alarm clock showing labeled buttons (Down, Up, Light/Snooze, Mode, Alarm) and ports (Battery Compartment, Power Cord Port), along with product dimensions.

1. DOWN Button: Used to decrease values or navigate menus.
2. UP Button: Used to increase values or navigate menus.
3. LIGHT/SNOOZE Button: Activates snooze during an alarm; adjusts brightness or turns off display.
4. MODE Button: Switches between Time, Date, and Temperature display modes; enters setting modes.
5. ALARM Button: Enters alarm setting mode.
6. Battery Compartment: Holds 3 AAA batteries (not included) for backup power or voice-activated display.
7. Power Cord Port: Connects the USB power cable for continuous display.

4. Setup

4.1 Powering the Clock

The clock can be powered in two ways:

• USB Cable (Included): Connect the provided USB cable to the Power Cord Port on the back of the clock and plug the other end into a USB power adapter (not included) or a USB port. The display will remain continuously on.
• 3 x AAA Batteries (Not Included): Open the Battery Compartment and insert 3 AAA batteries, ensuring correct polarity. When powered by batteries only, the LED display will not be continuously on. It will activate for 16 seconds when voice or touch is detected, then turn off to conserve energy.

Image: Demonstrates the two power modes: Cord Powered (display always on) and Batteries Powered (display voice-activated, turns off after 16 seconds).

Recommendation: For continuous display, use the USB cable. For portability or energy saving with voice activation, use batteries. If using the USB cable, batteries can serve as a backup in case of power outage.

4.2 Initial Time Setting

1. After powering on, the clock will typically display the default time.
2. Press and hold the MODE button for 3 seconds to enter time setting mode. The hour digits will flash.
3. Use the UP or DOWN buttons to adjust the hour.
4. Press the MODE button again to confirm the hour and move to minute setting. The minute digits will flash.
5. Use the UP or DOWN buttons to adjust the minute.
6. Press the MODE button again to confirm the minute.
7. The display will then show "12H" or "24H". Use UP or DOWN to select your preferred time format.
8. Press the MODE button one last time to exit time setting.

5. Operating Instructions

5.1 Display Modes (Time, Date, Temperature)

Press the MODE button repeatedly to cycle through the display modes:

• Time Display: Shows the current time.
• Date Display: Shows the current date (Year-Month-Day).
• Temperature Display: Shows the current ambient temperature (in Celsius or Fahrenheit).

Image: The clock cycling through Temperature, Time, and Date display modes.

To set the Date and Temperature unit:

1. While in Date display mode, press and hold the MODE button for 3 seconds. The year will flash.
2. Use UP or DOWN to adjust the year, then press MODE to confirm.
3. Repeat for month and day.
4. After setting the date, the temperature unit (°C/°F) will flash. Use UP or DOWN to select Celsius or Fahrenheit.
5. Press MODE to exit.

5.2 Setting Alarms

The clock supports up to 3 independent alarms (AL1, AL2, AL3).

1. Press the ALARM button to cycle through AL1, AL2, AL3, and OFF.
2. To set an alarm, select AL1, AL2, or AL3, then press and hold the ALARM button for 3 seconds. The hour digits will flash.
3. Use UP or DOWN to adjust the hour, then press ALARM to confirm.
4. Repeat for minutes.
5. After setting the time, the alarm mode will flash: "1-5" (Mon-Fri), "1-6" (Mon-Sat), or "1-7" (Mon-Sun). Use UP or DOWN to select the desired alarm frequency.
6. Press ALARM to confirm and exit.
7. To turn an alarm ON/OFF, short press the ALARM button until the desired alarm (AL1, AL2, or AL3) is displayed, then press UP or DOWN to toggle it on or off. An alarm icon will appear when active.

5.3 Snooze Function

When an alarm rings, press the LIGHT/SNOOZE button to activate the snooze function. The alarm will pause and ring again after the set snooze duration.

Image: A person reaching to press the snooze button on the alarm clock.

To adjust the snooze duration (default 5 minutes):

1. While in time display mode, press and hold the LIGHT/SNOOZE button for 3 seconds. The snooze time (e.g., "05") will flash.
2. Use UP or DOWN to set the snooze duration from 1 to 60 minutes.
3. Press LIGHT/SNOOZE again to confirm and exit.

To stop an alarm completely, press any button other than LIGHT/SNOOZE when it is ringing.

5.4 Adjustable Brightness

The clock has 3 brightness levels and an automatic adjustment feature.

• Manual Adjustment: Short press the LIGHT/SNOOZE button (when no alarm is ringing) to cycle through Bright, Medium, and Low brightness levels.
• Automatic Adjustment: The clock will automatically adjust to the lowest brightness level during nighttime hours (e.g., 6:00 PM to 6:00 AM) based on its internal settings.
• Turn Off Display: To completely turn off the display at night, press and hold the LIGHT/SNOOZE button for 3 seconds. The display will go blank.

Image: A person pressing and holding the Light/Snooze button to turn off the screen at night, preventing light disturbance.

Note: If the display is manually turned off, voice control will not activate the display. You will need to short press the LIGHT/SNOOZE button to turn it back on.

5.5 Intelligent Voice Control (Battery Mode Only)

When the clock is powered by batteries only, the display will be off to save energy. It can be activated by voice or touch.

• Make a sound (e.g., clap, speak) or gently tap the clock/surface it rests on.
• The display will illuminate for 16 seconds and then automatically turn off.

6. Maintenance

• Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Power: Ensure the correct power source is used (USB cable or 3 AAA batteries).
• Environment: Avoid placing the clock in direct sunlight, high humidity, or extreme temperatures.
• Battery Replacement: If using batteries, replace them when the display becomes dim or unresponsive to voice/touch activation.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Lafocuse website. Keep your purchase receipt for warranty claims.

Manufacturer: Quarebest