SAVILAND One-Step Gel Nail Polish Pens Set User Manual

Product Overview

The SAVILAND One-Step Gel Nail Polish Pen is designed for convenient nail application, combining base coat, color gel, and top coat into a single pen. This product requires a UV/LED lamp for curing to achieve a durable, glossy finish.

This set includes 6 pearl pink and blue polarized iridescent shades, offering a unique aurora effect.

Two women applying SAVILAND One-Step Gel Nail Polish Pens, illustrating the 3-in-1 concept with base, color, and top coat bottles.

Image: The 3-in-1 functionality of the SAVILAND One-Step Gel Nail Polish Pen, combining base, color, and top coat.

Safety Information

For external use only. Avoid contact with eyes and skin other than nails.
Keep out of reach of children.
Store in a cool, dry place away from direct sunlight.
Discontinue use if irritation or allergic reaction occurs.
A UV/LED nail lamp is required for curing this gel polish. This set does not include a nail lamp; please purchase separately.

Ingredients

The gel polish is enriched with nourishing ingredients:

Castor Oil
Vitamin E

Setup and Nail Preparation

Proper nail preparation is essential for optimal adhesion and longevity of the gel polish.

File the Nail Surface: Gently file the nail surface to remove shine and create a slightly rough texture for better adhesion.
Clean Nails: Clean nail debris and oil from the nail surface using a cleaning pad or lint-free wipe soaked in nail cleanser or rubbing alcohol. Ensure nails are completely dry before application.

Three circular images showing nail preparation, gel application, and UV light curing.

Image: Visual guide for nail preparation, gel application, and curing with a UV lamp.

Application Instructions

Follow these steps for applying the SAVILAND One-Step Gel Nail Polish Pen:

Shake the Pen: Gently shake the pen before use to mix the gel and glitter evenly.
Dispense Gel: Twist the bottom of the pen clockwise until a small amount of gel appears on the brush tip. For first-time use, you may need to twist about 10 times. Stop twisting once gel starts flowing to avoid excess.
Apply First Coat: Apply a thin, even layer of gel to the nail surface, avoiding the cuticle and surrounding skin.
Cure First Coat: Place your hand under a UV/LED lamp and cure for 30-60 seconds. (Refer to Curing Instructions section for details).
Apply Second Coat (Optional): For a more opaque color or deeper aurora effect, apply a second thin layer of gel.
Cure Second Coat: Cure the second coat under the UV/LED lamp for an additional 30-60 seconds.
Final Cure: For a long-lasting finish, allow the nails to cure for an additional 60 seconds after the final coat.

Eight step-by-step images demonstrating how to use the SAVILAND One-Step Gel Nail Polish Pen, from filing to curing and cleaning.

Image: Detailed visual steps for applying the gel polish, including nail preparation, twisting the pen, application, and curing.

Video: Demonstration of the SAVILAND One-Step Gel Polish Pen application process.

Curing Instructions

The SAVILAND One-Step Gel Nail Polish requires a UV or LED nail lamp to cure and harden. Curing times may vary based on the wattage of your lamp and the thickness of the gel layer.

UV Lamp: Cure each layer for approximately 120 seconds.
LED Lamp: Cure each layer for approximately 30-60 seconds.
Ensure your entire nail surface is exposed to the light during curing.

Important Note: Gel polish will not air dry. A UV/LED lamp is essential for the product to set and achieve its intended durability and finish.

Maintenance and Storage

Brush Cleaning: After each use, gently wipe the brush tip clean with a lint-free wipe to prevent gel from hardening on the brush and ensure it's ready for next use.
Storage: Store the pens upright in a cool, dry place, away from direct sunlight and any UV/LED light sources. Ensure the cap is securely fastened to prevent air exposure and premature hardening.

Video: Unboxing and initial handling of the SAVILAND One-Step Gel Polish Pens, including brush cleaning.

Troubleshooting

Problem	Possible Cause	Solution
Gel polish remains wet or sticky after curing.	Insufficient curing time. Lamp wattage is too low. Gel layer is too thick. No UV/LED lamp used.	Ensure adequate curing time (30-60s for LED, 120s for UV). Verify your lamp is functioning correctly and has sufficient wattage. Apply thinner coats of gel polish. Always use a UV/LED lamp to cure gel polish; it will not air dry.
Polish chips or peels quickly.	Improper nail preparation (oils or debris on nail). Gel applied too close to cuticles or skin. Insufficient curing.	Thoroughly clean and dehydrate nails before application. Ensure gel is applied only to the nail plate, leaving a small margin around cuticles. Increase curing time or ensure even exposure to the lamp.
Gel does not dispense from the pen.	Not enough twists. Gel has dried in the brush.	Twist the bottom of the pen clockwise multiple times until gel appears. For first use, this may take up to 10 twists. Ensure the brush tip is cleaned after each use and the cap is secured to prevent drying.

Specifications

Brand: SAVILAND
Model: One-Step Gel Nail Polish Pens Set
Package Dimensions: 5.04 x 4.17 x 0.87 inches
Weight: 4.66 ounces
Volume per pen: 4ml (6 pens included in set)
Curing Requirement: UV/LED Nail Lamp (not included)

Warranty and Support

Specific warranty information for this product is not provided in the available documentation. For any product-related inquiries, technical support, or warranty claims, please contact SAVILAND customer service directly through their official website or the retailer where the product was purchased.

You can visit the SAVILAND Store on Amazon for more information and contact options.