YITAHOME Commercial Under Counter Ice Maker

1. Introduction

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your YITAHOME Commercial Under Counter Ice Maker. Please read this manual thoroughly before using the appliance and retain it for future reference.

Image 1.1: YITAHOME Commercial Under Counter Ice Maker, Silver finish.

Key Features:

• High Capacity: Produces up to 132 lbs of ice per 24 hours and stores up to 33 lbs.
• Adjustable Ice Thickness: Customize ice cube size for various needs.
• ETL & DOE Certified: Ensures safety and energy efficiency.
• Automatic Cleaning: Simplifies maintenance with a one-touch cleaning function.
• Enhanced Insulation: Keeps ice frozen for up to 8 hours.
• Smart Control Panel: Intuitive interface for easy operation, scheduling, and alerts.

2. Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.

General Safety:

• Ensure the appliance is properly grounded.
• Do not operate the ice maker with a damaged power cord or plug.
• Keep ventilation openings clear of obstructions.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Electrical Safety:

• Connect to a properly rated and grounded power outlet.
• Do not use extension cords or ungrounded adapters.
• Always unplug the unit before cleaning or performing maintenance.

3. Package Contents

Verify that all items are present in the packaging:

• YITAHOME Commercial Under Counter Ice Maker Unit
• Ice Scoop
• Water Filter
• Water Inlet Hose
• Drain Hose
• Adjustable Feet (pre-installed or separate)
• Instruction Manual

Image 3.1: Ice maker with included accessories, including the water filter, water hose, and ice scoop.

4. Setup

4.1 Unpacking and Initial Inspection

1. Carefully remove all packaging materials.
2. Inspect the unit for any shipping damage. If damage is found, do not operate and contact customer support.
3. Remove any protective film from the stainless steel surfaces.
4. Allow the unit to stand upright for at least 24 hours before plugging it in to allow compressor fluids to settle.

4.2 Placement

• Place the ice maker on a flat, stable surface.
• Ensure adequate ventilation around the unit. Maintain at least 5 inches of space from walls or other appliances.
• The unit dimensions are approximately 18.11"D x 15.67"W x 27.92"H.
• This model is designed for both freestanding and under-counter installation.

4.3 Water Connection

The ice maker can be connected to a direct water supply or use a bottled water system.

1. Install Water Filter: Connect the provided water filter to the designated inlet on the back of the unit. Ensure a secure connection.
2. Connect Water Inlet Hose: Attach one end of the water inlet hose to the water filter outlet and the other end to your water supply (tap water or bottled water pump).
3. Connect Drain Hose: Attach the drain hose to the unit's drain outlet and route it to a suitable drain. Ensure the hose has a downward slope for proper drainage.

Image 4.2: Illustration of the water filter and water connection points on the ice maker.

4.4 Power Connection

Plug the power cord into a dedicated 110V grounded electrical outlet. Do not share the outlet with other high-power appliances.

4.5 Initial Cleaning

Before first use, it is recommended to perform an initial cleaning cycle. Refer to the "Maintenance" section for detailed instructions on the automatic cleaning function.

5. Operating Instructions

5.1 Control Panel Overview

The ice maker features an intuitive touch control panel. Familiarize yourself with the buttons and indicators:

Image 5.1: The control panel displays current status, time, and offers various functions including On/Off, Clean, De-icing, Light, and Timer.

• On/Off Button: Powers the unit on or off.
• Clean Button: Initiates the automatic cleaning cycle.
• De-icing Button: Activates the de-icing operation.
• Light Button: Controls the internal blue light.
• Timer Button: Sets the 24-hour reservation function.
• +/- Buttons: Adjust ice thickness or timer settings.
• Indicators: Display ice making status, cleaning status, timer, blue light status, low water alert, and full ice bin alert.

5.2 Making Ice

1. Ensure the water supply is connected and the unit is plugged in.
2. Press the "On/Off" button to start the ice making process.
3. Use the "+/-" buttons to adjust the desired ice thickness. The display will show the current thickness setting (e.g., 0-9 for thin, 1-7 for medium, 8-15 for thick).
4. The unit will automatically begin producing ice. Each cycle produces 55 clear cubes in approximately 8-15 minutes, depending on thickness and ambient temperature.
5. The blue light inside the ice bin helps to slow down ice melting and provides visibility.

Image 5.2: Ice thickness can be adjusted from thin (8-10 min) to medium (11-15 min) to thick (16-20 min) using the control panel.

5.3 24-Hour Reservation Function

The timer function allows you to schedule ice production for up to 24 hours in advance.

1. Press and hold the "Timer" button for 3 seconds to enter the scheduled boot mode.
2. Use the "+/-" buttons to set the desired delay time (in hours) before the ice making process begins.
3. The unit will automatically start making ice after the set delay.

Image 5.3: The 24-hour reservation function allows users to set a timer for ice production, improving operational efficiency and reducing energy costs.

6. Maintenance

6.1 Automatic Cleaning Function

The ice maker is equipped with an automatic cleaning system to maintain hygiene and performance.

1. Ensure the unit is connected to a water supply and the drain hose is properly routed.
2. Press the "Clean" button on the control panel to start the cleaning cycle.
3. The unit will automatically flush and clean the internal components.
4. Once the cycle is complete, the unit will return to standby mode.

Image 6.1: The automatic cleaning system ensures the ice maker remains hygienic and produces clean ice.

6.2 Water Filter Replacement

Regularly check and replace the water filter to ensure optimal ice quality. The frequency depends on water quality and usage.

1. Turn off the ice maker and unplug it from the power outlet.
2. Shut off the water supply to the unit.
3. Disconnect the old water filter and replace it with a new one, ensuring proper orientation (IN/OUT).
4. Reconnect the water supply and check for leaks.
5. Plug in the unit and turn it on.

6.3 Drainage

For thorough cleaning or long-term storage, drain all water from the unit.

1. Unplug the ice maker and shut off the water supply.
2. Disconnect the drain hose from the main drain and allow all water to empty into a bucket or sink.
3. Once drained, reconnect the drain hose.

6.4 Long-Term Storage

If the ice maker will not be used for an extended period:

• Perform a full cleaning cycle.
• Drain all water from the unit.
• Unplug the power cord and store it neatly.
• Cover the unit to protect it from dust and store it in a dry, well-ventilated area.

7. Troubleshooting

Refer to the table below for common issues and their solutions. If the problem persists, contact customer support.

8. Specifications

9. Warranty and Support

YITAHOME products are designed for quality and reliability. For warranty information, product support, or to purchase replacement parts, please refer to the contact information provided with your purchase documentation or visit the official YITAHOME website.

Please have your model number (MAYIHAmye6) and purchase date available when contacting support.