YITAHOME 120lbs Commercial Under Counter Ice Maker

1. Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your YITAHOME 120lbs Commercial Under Counter Ice Maker. Please read all instructions carefully before using the appliance.

1.1 Safety Information

Your YITAHOME ice maker is ETL certified, ensuring it meets rigorous safety standards. Always adhere to the following safety guidelines:

• Ensure the appliance is properly grounded.
• Do not operate the machine with a damaged power cord or plug.
• Keep ventilation openings clear of obstructions.
• Only use the appliance for its intended purpose.
• This appliance uses R290a refrigerant; service should only be performed by qualified personnel.

1.2 Included Components

Upon unpacking, verify that all components are present:

• YITAHOME Ice Maker Unit
• Ice Scoop
• Water Filter
• Water Inlet Hose
• Drain Pipe
• Ice Bucket (if applicable)

Figure 1.1: Overview of Ice Maker Capacity, Dimensions, and Included Accessories. The image highlights the 120 lbs/24 hours ice production, 33 lbs storage, auto-cleaning, and the physical dimensions of the unit (18.11"D x 15.67"W x 27.92"H).

2. Setup

2.1 Placement

The YITAHOME ice maker can be installed freestanding or under a counter. Ensure the chosen location has:

• Adequate ventilation around the unit.
• A stable, level surface.
• Proximity to a 110 Volt power outlet.
• Access to a water source and drain.

2.2 Water Connection

Your ice maker supports two water inlet methods: direct tap water supply or bottled water supply.

• Tap Water Supply: Connect the provided water inlet hose to a potable water source and the ice maker's water inlet port. Ensure the upgraded water filter is installed in-line to purify tap water.
• Bottled Water Supply: Place a 3-5 gallon water bottle on the top-loading dispenser. Ensure the tap water switch is turned OFF when using bottled water.

Figure 2.1: Two Water Inlet Methods. This diagram shows the connection points for both tap water (with an external filter) and the placement of a bottled water dispenser on top of the unit.

Figure 2.2: Powerful Water Purifier. The image highlights the external water filter system designed to purify tap water for ice production.

2.3 Initial Cleaning

Before first use, it is recommended to run the automatic cleaning cycle to ensure the internal components are clean. Refer to Section 4.1 for instructions on initiating the automatic cleaning process.

3. Operating Instructions

3.1 Control Panel Overview

The intuitive touch control panel allows for easy operation and customization of ice production.

Figure 3.1: Intuitive Touch Controls. This image details the functions of each button and indicator light on the control panel, such as On/Off, Clean, De-icing, Light, Timer, and indicators for ice making, lack of water, and full ice bin.

3.2 Ice Production

Once connected to power and water, press the 'On/Off' button to start ice production. The machine will produce 40 clear ice cubes every 8-15 minutes, with a daily capacity of 120 lbs.

Figure 3.2: YITAHOME Ice Maker in Operation. This image displays the ice maker actively producing and storing ice, with a clear view of the ice bin.

3.3 Adjustable Ice Thickness

You can adjust the thickness of the ice cubes using the control panel. Press the '+' or '-' buttons next to the timer display to cycle through thickness settings. A smaller value indicates thinner ice (8-10 min), while a larger value indicates thicker ice (16-20 min).

Figure 3.3: Adjustable Ice Thickness. This graphic demonstrates how to modify ice cube thickness via the control panel, with visual examples of thin, medium, and thick ice.

3.4 24-Hour Reservation Function

Utilize the timer function to schedule ice production up to 24 hours in advance. This feature allows for energy savings and ensures ice is ready when needed. Press and hold the 'Timer' button for 3 seconds to enter the scheduled boot mode.

Figure 3.4: 24-Hour Reservation Function. This image explains the benefits of using the timer function for scheduled ice production.

3.5 Ice Storage and Retention

The ice maker features a 33 lbs storage bin. With 20% thicker cyclopentane insulation, the machine can retain ice for up to 8 hours, compared to standard 6-hour retention. A blue light inside the bin helps slow melting.

Figure 3.5: Ice Insulation. This diagram highlights the multi-layer insulation design that contributes to extended ice retention.

3.6 Using the Ice Scoop and Bucket

Use the provided ice scoop to retrieve ice from the storage bin. The ice bucket can be used for temporary storage or serving.

Figure 3.6: Top-Loading and Accessories. This image shows the top-loading water bottle placement and the included ice scoop and bucket for convenient ice handling.

4. Maintenance

4.1 Automatic Cleaning System

The ice maker features an automatic cleaning function to maintain hygiene and prevent mineral buildup. To initiate the cleaning cycle, press the 'Clean' button on the control panel. The machine will perform a self-cleaning process.

Figure 4.1: Automatic Cleaning. This image shows the internal cleaning process of the ice maker.

4.2 Water Filter Maintenance

The upgraded water filter purifies tap water. Regularly inspect and replace the filter as needed to ensure optimal ice quality and machine performance. Refer to the filter's instructions for replacement frequency.

4.3 General Cleaning

Periodically wipe down the exterior of the machine with a soft, damp cloth. For the interior, after draining the water, wipe surfaces with a mild, food-safe cleaning solution and rinse thoroughly. Ensure the protective film is peeled off after receiving the unit.

Figure 4.2: Product Details. This image highlights features like the copper nickel ice tray, the recommendation to close the lid during ice making, the protective film to be removed, and the adjustable stand legs.

5. Troubleshooting

This section addresses common issues you might encounter with your ice maker. For problems not listed here, please contact customer support.

6. Specifications

7. Warranty and Support

Your YITAHOME ice maker is designed for durability and performance, backed by ETL and DOE certifications. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official YITAHOME website. Keep your purchase receipt for warranty claims.