Introduction
This manual provides essential instructions for the safe and effective use of your Meliya 4mm Magnetic USB Charging Cable, designed for Gloryfit T80, T70, T60, T50, P99, and P98 smartwatches. Please read this manual thoroughly before use and retain it for future reference.
Product Features
- Compatibility: Specifically designed for Gloryfit T80, T70, T60, T50, P99, P98 smartwatches.
- Durable Construction: Made from high-quality ABS plastic and TPE cable for stability and environmental friendliness.
- Enhanced Safety: Features built-in over-current, over-voltage, short-circuit, and over-temperature protection.
- Reliable Charging: Premium quality copper wire and gold-plated pins ensure safe and efficient power transfer.
- Convenient Lengths: Available in 60cm (2FT) and 100cm (3.3FT) options for flexible use.
Image: Illustration of the charger's reinforced design, highlighting multi-layer shielding, flexible PVC cable, and pure copper probe with 4mm gap for stable conduction.
Setup and Usage
- Verify Compatibility: Before connecting, ensure your smartwatch has a 2-pin magnetic charging port with a 4mm (0.16 inch) pin spacing. Incorrect spacing may prevent charging or damage the device.
- Connect to Power Source: Plug the USB-A end of the charging cable into a stable USB power source. Recommended sources include a computer, laptop, or a dedicated USB wall adapter (5V/0.5-1A output). Avoid using high-power cell phone chargers.
- Attach Smartwatch: Align the magnetic charging pins of the cable with the charging contacts on your smartwatch. The magnetic connection will secure the charger in place. Ensure a firm connection for optimal charging.
- Monitor Charging: The smartwatch display should indicate that it is charging.
Image: Diagram illustrating how to measure the 4mm pin spacing on a smartwatch charging port, indicating the correct magnetic pole alignment (N, +, S).
Image: Visual comparison of correct (4mm/0.16inch) and incorrect (2.84mm/0.11inch) pin spacing for the magnetic charging port, emphasizing the need for 4mm spacing.
Image: Diagram showing various compatible USB power sources for the charger, including computers, laptops, power strips, charger heads, and power banks.
Image: A smartwatch connected to the magnetic charger, which is plugged into a laptop, illustrating the charging process and highlighting built-in protections.
Important Charging Tips
- For optimal battery longevity, limit recharging time to approximately 80 minutes.
- It is advisable to charge your smartwatch before the battery is completely depleted.
- Always use a USB power source from a PC, Mac, laptop, or notebook for more stable voltage, rather than a high-power cell phone charger.
- The charging cable includes a built-in chip designed to protect your watch and prolong its service life.
Compatibility Overview
This charger is compatible with a range of smartwatches that utilize a 2-pin, 4mm magnetic charging interface. Confirmed compatible models include:
- Gloryfit T80
- Gloryfit T70
- Gloryfit T60
- Gloryfit T50
- Gloryfit P99
- Gloryfit P98
Image: A visual representation of various smartwatch models that are compatible with this 4mm magnetic charger.
Specifications
| Input Voltage/Current | 5V/0.5-1A |
| Cable Length Options | 60cm (2FT), 100cm (3.3FT) |
| Connector Type | USB Type A (Input), 2-Pin Magnetic (Output) |
| Pin Spacing | 4mm (0.16 inch) |
| Material | ABS Plastic, TPE Cable, Copper Wire, Gold-Plated Pins |
| Safety Features | Over-current protection, Over-voltage protection, Short-circuit protection, Over-temperature protection |
Maintenance
- Keep the charging cable and magnetic contacts clean and free from dust or debris.
- Avoid bending or twisting the cable excessively to prevent internal damage.
- Store the charger in a dry place away from extreme temperatures.
Troubleshooting
- Smartwatch not charging:
- Ensure the magnetic contacts on both the charger and smartwatch are clean and free of obstructions.
- Verify that the charging pins are correctly aligned and the magnetic connection is secure.
- Check if the USB power source is active and providing power. Try a different USB port or adapter.
- Confirm that your smartwatch model is compatible with a 4mm 2-pin magnetic charger.
- Slow charging:
- Ensure the power source provides sufficient current (0.5-1A). Using a lower current source may result in slower charging.
- Avoid using shared USB hubs or unpowered USB ports, which may deliver insufficient power.
- Charger feels warm:
- A slight warmth during charging is normal. If the charger becomes excessively hot, disconnect it immediately and contact support.
Safety Information
- Do not expose the charger to water or excessive moisture.
- Avoid dropping or subjecting the charger to strong impacts.
- Do not attempt to disassemble or modify the charger.
- Keep out of reach of children.
- Disconnect the charger from the power source when not in use.
Package Contents
Your package includes:
- 2 x Meliya 4mm Magnetic USB Charging Cables (lengths may vary based on purchased variant, e.g., 2FT+2FT or 2FT+3.3FT)
Image: Two Meliya 4mm magnetic USB charging cables, illustrating the product as packaged.
Warranty and Support
For any questions regarding the product before or after purchase, please contact Meliya customer support. Refer to your purchase documentation for specific warranty details.
Visit the Meliya Store for more information.