Introduction
This manual provides instructions for the My Fan Parts Merwry DL-4112T-02 Fan Remote Control, a replacement for Home Decorators Ceiling Fans, including models 2A767-DL-4112T-01 and 28865-DL4112T. This remote offers comprehensive control over your ceiling fan's functions, including fan speed, light operation, and reverse function.
Product Overview
Figure 1: Comparison of the original remote control (left) and the My Fan Parts DL-4112T-02 replacement remote control (right). Note the distinct button layouts.
Figure 2: Detailed view of the My Fan Parts DL-4112T-02 replacement remote control, highlighting the control buttons for fan speed (HI, MED, LOW), light (bulb icon), fan off (OFF), and reverse function (arrow icon).
The DL-4112T-02 remote control is designed for ease of use, featuring clearly labeled buttons for all primary functions. It includes a dedicated reverse function button on the front, eliminating the need to access internal dip switches for this operation, unlike some original remotes.
Setup
1. Battery Installation
The remote requires one 9V battery (not included).
- Locate the battery compartment on the back of the remote control.
- Slide open the battery compartment cover.
- Insert a new 9V battery, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
2. Pairing Process (Dip Switch Setting)
To ensure compatibility with your ceiling fan receiver, you must match the dip switch settings on the new remote to those of your old remote or the fan's receiver unit.
- Open the battery compartment of the new DL-4112T-02 remote control.
- Locate the series of small switches (dip switches) inside the battery compartment.
- Identify the dip switch settings on your old remote control or the fan's receiver unit. These are typically a series of small switches set to either an "ON" or "OFF" position (or up/down).
- Carefully adjust the dip switches on the new DL-4112T-02 remote to exactly match the pattern of your old remote/receiver.
- Once the dip switches are matched, close the battery compartment.
Note: If you encounter difficulties or require assistance with the pairing process, free technical support is available from My Fan Parts.
3. Wall Mount Installation
Figure 3: The My Fan Parts DL-4112T-02 remote control shown with its included wall mount bracket.
The remote comes with a convenient wall mount and screws for secure storage.
- Choose a suitable location on a wall, within easy reach.
- Using the wall mount as a template, mark the positions for the screws.
- Drill pilot holes if necessary.
- Secure the wall mount to the wall using the provided screws.
- Slide the remote control into the mounted bracket.
Operating Instructions
The DL-4112T-02 remote control provides intuitive operation for your ceiling fan and light.
- Fan Speed Control:
- Press HI for high fan speed.
- Press MED for medium fan speed.
- Press LOW for low fan speed.
- Fan Off:
- Press OFF to turn the fan off.
- Light Control:
- Press the Light Bulb Icon button to turn the light on or off.
- Reverse Function:
- Press the Reverse Arrow Icon button to change the direction of the fan blades (e.g., for summer downdraft or winter updraft). This button is located on the front of the remote for easy access.
Maintenance
- Battery Replacement: Replace the 9V battery when the remote's range decreases or functions become intermittent. Always use a fresh 9V alkaline battery.
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or immerse the remote in water.
- Storage: Store the remote in a dry place, away from extreme temperatures and direct sunlight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not controlling fan/light. |
|
|
| Intermittent control. |
|
|
| Reverse function not working. |
|
|
If problems persist after attempting these solutions, please contact My Fan Parts customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | DL-4112T-02 |
| Brand | My Fan Parts |
| Compatible Devices | Home Decorators Merwry Ceiling Fans (e.g., 2A767-DL-4112T-01, 28865-DL4112T) |
| Connectivity Technology | Radio Frequency (RF) |
| Power Source | 1 x 9V Battery (not included) |
| Functions Controlled | Fan Speed (Hi/Med/Low), Fan Off, Light On/Off, Fan Reverse Function |
| Weight | 3.84 ounces |
Support
For technical assistance, troubleshooting, or any questions regarding your My Fan Parts DL-4112T-02 remote control, please contact My Fan Parts customer support. Refer to the product packaging or the seller's information for contact details.
Note: Free technical support is available for pairing assistance.