1. Safety Information
Please read all instructions carefully before installation and use. Failure to do so may result in personal injury or property damage.
- Weight Capacity: This TV wall mount is designed for TVs weighing up to 132 lbs (60 kg). Do not exceed this weight limit.
- TV Size Compatibility: Suitable for most 32-85 inch flat or curved TVs.
- Wall Type: This mount is intended for installation on 8"/12"/16" wood studs, concrete walls, or brick walls.
- WARNING: DO NOT INSTALL ON DRYWALL ALONE. Drywall cannot support the weight of the mount and TV.
- VESA Compatibility: Ensure your TV's VESA pattern (mounting hole distance) is between 200x100mm and 600x400mm.
- Always use a qualified professional for installation if you are unsure about the process.
- Ensure all screws are securely tightened before use.
2. Package Contents
Verify that all components are present and undamaged before beginning installation.
Image: All components of the HOME VISION Full Motion TV Wall Mount, including the main mount assembly, TV brackets, and hardware kit.
- Wall Plate Assembly (1)
- TV Brackets (2)
- Mounting Hardware Kit (various screws, anchors, washers, spacers)
- Bubble Level (1)
- Drilling Template (1)
- Cable Ties (3)
- Instruction Manual (this document)
3. Product Specifications
| Brand | HOME VISION |
| Model Number | HV6602 |
| Item Weight | 12.87 pounds |
| Product Dimensions | 17.2 x 11.2 x 2.3 inches |
| Mounting Type | Wall Mount |
| Movement Type | Articulating, Swivel, Tilt |
| Material | Alloy Steel |
| Color | Black |
| Compatible Devices | Television |
| Maximum Tilt Angle | 15 Degrees |
| Max Load Capacity | 132 lbs (60 kg) |
| VESA Compatibility | 200x100mm to 600x400mm |
| TV Size Compatibility | 32-85 inches |
4. Installation Guide
4.1 Before You Begin
- Confirm your TV's weight, size, and VESA pattern are within the mount's specifications.
- Identify your wall type (wood studs, concrete, or brick).
- Gather necessary tools (e.g., drill, stud finder, screwdriver, measuring tape).
4.2 Wall Type Compatibility
This mount is compatible with:
- Wood Studs: Fits 8", 12", or 16" wood studs. Use a stud finder to locate the center of the studs.
- Concrete Walls: Requires concrete anchors (included).
- Brick Walls: Requires brick anchors (included).
Important: Do not install this mount on drywall alone. It must be secured to structural elements.
Image: Illustration showing compatibility with wood studs, brick walls, and concrete walls. Emphasizes not to install on drywall only.
4.3 VESA Compatibility
VESA refers to the distance between the four mounting holes on the back of your TV. This mount supports VESA patterns from 200x100mm to 600x400mm.
Image: Diagram illustrating how to measure horizontal and vertical VESA distances on the back of a TV.
4.4 Check Cable Outlets
Before mounting, check the location of your TV's cable outlets to ensure the mount does not obstruct them. The wall plate offers ample side clearance for accessing power cords and media ports.
Image: Illustration showing correct and incorrect placement of the mount relative to TV cable outlets.
4.5 Mounting Steps
Follow these steps for a secure installation. A drilling template and bubble level are included to assist you.
Image: Visual guide for the three main installation steps: attaching brackets, mounting the wall plate, and hanging the TV.
- Attach TV Brackets to TV Back: Select the appropriate screws, washers, and spacers from the hardware kit. Secure the two TV brackets to the VESA mounting holes on the back of your television. Ensure they are firmly attached and aligned.
- Install the Wall Plate: Determine the desired height for your TV. Use the provided drilling template and bubble level to mark the pilot holes on your wall. Drill the holes according to your wall type (wood stud, concrete, or brick). Secure the wall plate assembly to the wall using the appropriate lag bolts and anchors.
- Hang TV onto Wall Plate: Carefully lift your TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated. Use the safety screws to prevent accidental detachment.
- Post-Installation Leveling: After hanging the TV, you can make fine adjustments to ensure it is perfectly level. The mount allows for a ±3° horizontal leveling adjustment.
Image: Diagram showing the ±3° post-level adjustment feature of the TV mount.
5. Operation and Adjustments
The HOME VISION Full Motion TV Wall Mount offers various adjustments for optimal viewing.
5.1 Extension and Retraction
The articulating arms allow you to extend your TV from 2.68 inches (68mm) when retracted to 16.53 inches (420mm) from the wall. Gently pull or push the TV to achieve the desired distance.
Image: Illustration demonstrating the extension and retraction capabilities of the TV mount.
5.2 Swivel Adjustment
The mount allows for a swivel of up to ±65°, depending on your TV size. This enables you to angle your TV for optimal viewing from different positions in the room.
Image: A TV mounted on the wall, swiveled to an angle, demonstrating the ±65° swivel feature.
5.3 Tilt Adjustment
Adjust the tilt angle from +5° to -15° to reduce glare from lights or windows and achieve a more comfortable viewing experience.
Image: Illustration showing the TV tilted upwards (+5°) and downwards (-15°) to minimize glare.
6. Maintenance
- Regular Inspection: Periodically check all screws and connections to ensure they remain tight and secure.
- Cleaning: Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners or harsh chemicals, as they may damage the finish.
- Lubrication: If the articulating arms become stiff, a small amount of silicone-based lubricant can be applied to the moving joints. Avoid oil-based lubricants.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level after installation. | Minor misalignment during installation. | Use the post-installation leveling feature to adjust the horizontal angle by ±3°. Refer to section 4.5. |
| TV does not fit the mount. | Incorrect VESA pattern or TV size/weight. | Verify your TV's VESA pattern, weight, and size against the product specifications (Section 3). If incompatible, do not proceed with installation. |
| Mount arms are stiff or difficult to move. | Joints may require lubrication or are too tight. | Ensure no locking mechanisms are engaged. Apply a small amount of silicone-based lubricant to the moving joints if necessary. |
| Cables are obstructed by the mount. | Mounting position interferes with TV ports. | Review Section 4.4. If possible, adjust the TV brackets or the wall plate slightly to clear the ports. Use cable ties to manage cables neatly. |
8. Warranty and Customer Support
For warranty information, please refer to the documentation included with your purchase or visit the official HOME VISION website.
If you have any questions about selecting or installing your HOME VISION wall mount, or require further assistance, please contact our customer support team. We are committed to resolving any issues promptly.
Contact Information: Please refer to your purchase documentation or the HOME VISION brand store for the most current customer support contact details.