BONTANNY Red Light Therapy Device BO-600 User Manual

1. Introduction

The BONTANNY BO-600 Red Light Therapy Device is designed to provide targeted red and near-infrared light therapy. This device features 120 dual-chip LEDs emitting five scientifically optimized wavelengths (630nm, 660nm, 810nm, 830nm, and 850nm) to support various wellness applications. It includes a sturdy base for versatile positioning and offers smart control options via an intuitive panel and remote.

Image 1.1: BONTANNY BO-600 Red Light Therapy Device

2. Package Contents

Please ensure all items listed below are present in your package:

• BONTANNY Red Light Therapy Device (BO-600)
• User Manual
• Suspension Kit
• Door Hook
• Power Cord
• Eye Protection Goggles
• Device Base
• Remote Control (Note: 23A 12V battery not included)

Image 2.1: All included components of the BONTANNY BO-600 Red Light Therapy Device, including the panel, base, power cord, remote, eye protection, and hanging accessories.

3. Setup

The BONTANNY BO-600 offers both freestanding and hanging setup options.

3.1 Freestanding Setup (with Base)

1. Carefully unpack all components from the box.
2. Attach the two back legs to the device base using the provided screws. Ensure they are securely fastened.
3. Slide the main therapy panel into the assembled base. The panel should fit snugly into the brackets on the base, providing a stable foundation.
4. Connect the power cord to the designated port on the back of the device.

3.2 Hanging Setup

1. Identify the hanging points on the top of the device.
2. Attach the suspension kit to these points.
3. Securely mount the door hook or other hanging hardware to a stable surface (e.g., door, wall).
4. Hang the device using the suspension kit. Ensure the device is level and securely suspended before use.
5. Connect the power cord to the designated port on the back of the device.

Image 3.1: The BONTANNY BO-600 device securely placed on its sturdy base, ready for use.

4. Operating Instructions

Follow these steps to operate your BONTANNY BO-600 device:

1. Power On: Plug the device into a power outlet. Locate the main power switch on the back of the device and flip it to the 'ON' position. The digital display on the front panel will illuminate.
2. Wear Eye Protection: Always wear the provided eye protection goggles before activating the light therapy.
3. Select Mode: Use the 'MODE' button on the control panel or remote control to cycle through the available therapy modes:
   • Red: Activates only the red light LEDs (630nm, 660nm).
   • NIR: Activates only the near-infrared light LEDs (810nm, 830nm, 850nm).
   • Red + NIR: Activates both red and near-infrared light LEDs for combined therapy.
4. Set Timer: Use the '+' and '-' buttons on the control panel or remote to adjust the session duration. The timer can be set from 1 to 30 minutes. The device will automatically shut off once the timer expires.
5. Begin Session: Position yourself at the desired distance from the device (refer to Section 6 for guidelines). Relax and allow the device to perform the therapy.
6. Power Off: After your session, you can either wait for the timer to automatically shut off the device or manually turn it off using the power button on the control panel/remote, followed by flipping the main power switch on the back to 'OFF'.

Image 4.1: Close-up of the BONTANNY BO-600 control panel and remote, showing mode selection and timer adjustment buttons.

5. Therapy Modes and Wavelengths

The BONTANNY BO-600 device utilizes five specific wavelengths to target different depths of tissue:

• Red Light (630nm & 660nm): These wavelengths are primarily absorbed by the skin, supporting collagen production, improving skin health, and aiding in skin rejuvenation.
• Near-Infrared Light (810nm, 830nm & 850nm): These wavelengths penetrate deeper into tissues, promoting muscle recovery, easing muscle pain, and supporting overall deep tissue repair.
• Red + NIR Mode: This mode combines all five wavelengths for comprehensive treatment, offering both superficial skin benefits and deeper tissue support.

Image 5.1: A visual representation of the five distinct wavelengths (630nm, 660nm, 810nm, 830nm, 850nm) and how they penetrate different layers of the skin for targeted therapy.

6. Usage Guidelines

For optimal results and safety, adhere to the following guidelines:

• Recommended Distance: For maximum irradiance (130mW/cm²), position yourself approximately 6 inches (15 cm) from the device. The effective coverage area at this distance is approximately 35"x18".
• Session Duration: A typical session lasts 15 minutes. The device timer can be adjusted from 1 to 30 minutes based on personal preference and specific needs.
• Frequency: For consistent benefits, use the device daily or as recommended by a healthcare professional.
• Eye Protection: Always wear the provided eye protection goggles during your therapy session to shield your eyes from the bright LEDs.

Image 6.1: A chart detailing the irradiance levels and coverage areas at different distances (3, 6, 12, and 18 inches) from the BONTANNY BO-600 device.

7. Safety Information

Please read and follow all safety precautions to prevent injury or damage to the device:

• Always wear the provided eye protection goggles during operation. Do not look directly into the LEDs.
• Keep the device away from water or any liquids. Do not use in wet environments.
• Do not operate the device if the power cord or plug is damaged.
• Keep out of reach of children and pets.
• Consult a healthcare professional before using this device if you are pregnant, have any medical conditions, or are taking photosensitizing medications.
• Do not block the ventilation openings on the device, as this may lead to overheating.

8. Maintenance

Proper care and maintenance will ensure the longevity of your BONTANNY BO-600 device:

• Cleaning: Ensure the device is unplugged and turned off before cleaning. Wipe the surface of the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect the power cord and device for any signs of damage. If damage is found, discontinue use and contact customer support.

9. Troubleshooting

If you encounter any issues with your BONTANNY BO-600, refer to the following common problems and solutions:

If the problem persists, please contact BONTANNY customer support.

10. Specifications

• Model Number: BO-600
• Wavelengths: 630nm, 660nm, 810nm, 830nm, 850nm (5 Wavelengths)
• LEDs: 120 Dual Chip Clinical Grade LEDs
• Irradiance: 130mW/cm² (at 6 inches)
• Control Method: Remote Control, Touch Panel
• Timer: 1-30 minutes (adjustable)
• Power Source: Corded Electric
• Cooling System: Built-in Cooling Fan
• Housing: All-Metal
• Package Dimensions: 24.8 x 9.8 x 6.3 inches
• Package Weight: 14.1 Pounds
• EMF: Zero EMF at 3+ inches distance

11. Warranty and Support

Your BONTANNY BO-600 Red Light Therapy Device comes with a 3-year warranty from the date of purchase, covering manufacturing defects.

For technical support, warranty claims, or any inquiries, please contact:

• Manufacturer: Shenzhen Bonliter Optoelectronic Co., Ltd.
• Email: contact@bontanny.com

Please retain your proof of purchase for warranty purposes.