Assilyraft 4FT Pre-Lit Artificial Christmas Tree Instruction Manual

Introduction

Thank you for choosing the Assilyraft 4FT Pre-Lit Artificial Christmas Tree. This manual provides essential information for the safe assembly, operation, and maintenance of your new Christmas tree. Please read these instructions carefully before setup and retain them for future reference.

Safety Information

• This product is intended for indoor use only. Do not use outdoors.
• Ensure all electrical connections are secure and properly insulated.
• Do not overload electrical outlets.
• Keep the tree away from heat sources, open flames, and flammable materials.
• Always unplug the tree from the power source before assembly, disassembly, or maintenance.
• Do not allow children or pets to play with the electrical components.
• The tree is made with flame-retardant materials.

Package Contents

Please verify that all components are present before beginning assembly:

• Tree Sections (typically 2-3 sections, depending on model)
• Plastic Tree Stand
• Low-Voltage Adaptor with Light Controller

Setup Instructions

1. Assemble the Stand: Unfold the plastic tree stand and ensure it is stable on a flat surface.
2. Insert Bottom Section: Carefully insert the bottom section of the tree into the assembled stand. Tighten any screws on the stand to secure the tree trunk.
3. Connect Tree Sections: Insert the middle section(s) into the bottom section, aligning the poles. Ensure electrical connections between sections are securely plugged in, if applicable.
4. Insert Top Section: Place the top section onto the last middle section.
5. Fluff the Branches: Starting from the bottom, gently pull apart and shape each branch to create a full, natural appearance. Work your way up to the top of the tree. Ensure all 189 tips are properly extended.

Operating Instructions

Your Assilyraft Christmas tree features 70 pre-installed LED lights with multiple lighting modes.

1. Connect Power: Plug the low-voltage adaptor into a standard indoor electrical outlet.
2. Use the Light Controller: Locate the attached light controller (a small button on the power cord). Press this button to cycle through the available light modes.

Light Modes:

• Steady Warm White: Lights remain a constant warm white.
• Steady Multicolor: Lights remain a constant mix of colors.
• Fading Warm White: Warm white lights slowly fade in and out.
• Fading Multicolor: Multicolor lights slowly fade in and out.
• Off: Turns the lights off.

Maintenance

• Cleaning: Dust the tree gently with a soft, dry cloth. Do not use liquid cleaners or solvents.
• Light Inspection: Periodically check the LED lights and wiring for any damage. If any damage is found, discontinue use and contact customer support.
• Storage: Before storing, ensure the tree is completely dry. Disassemble the tree in reverse order of assembly. Gently compress the branches and store the tree sections and stand in their original packaging or a suitable storage bag in a cool, dry place away from direct sunlight.

Troubleshooting

Lights are not working:

• Ensure the power adaptor is securely plugged into a working electrical outlet.
• Check all connections between tree sections to ensure they are firmly seated.
• Verify that the light controller is not set to the 'Off' mode.
• Inspect the power cord and adaptor for any visible damage.

Tree appears sparse:

• Thoroughly fluff and shape each branch, starting from the innermost tips and working outwards. This process is crucial for achieving a full appearance.

Tree is unstable:

• Ensure the plastic stand is fully unfolded and placed on a flat, level surface.
• Verify that the bottom tree section is securely inserted into the stand and any securing screws are tightened.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Assilyraft customer service directly. Keep your purchase receipt for warranty claims.

Manufacturer: Yuda Arts product (Huizhou) CO LTD