Furniway White 6-Drawer Dresser

Introduction

Thank you for choosing the Furniway White 6-Drawer Dresser. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Safety Information

• Always assemble the dresser on a soft, clean surface to prevent scratches.
• Ensure all parts are securely fastened before use.
• To prevent tipping, always use the included anti-tip kit to secure the dresser to a wall. This is especially important in households with children or pets.
• Do not allow children to climb on or play with the dresser.
• Do not place heavy objects on top of the dresser that exceed its maximum load capacity of 75 lbs.
• Keep small parts and packaging materials away from children.

Package Contents

Before assembly, verify that all components and hardware are present and undamaged. Refer to the detailed parts list provided in your assembly guide. If any parts are missing or damaged, please contact customer support.

Setup and Assembly

Assembly typically requires two people and can take several hours. Follow the step-by-step instructions provided in the separate assembly manual included with your product. All parts are clearly labeled for ease of identification.

1. Unpack all components and lay them out on a clean, soft surface.
2. Identify each part using the labels and the assembly diagram.
3. Follow the numerical sequence of steps in the assembly manual.
4. Ensure all screws and fasteners are tightened securely, but do not overtighten.
5. Install the anti-tip kit as instructed to secure the dresser to a wall.

Operating Instructions

Drawer Operation (Push-to-Open Design)

This dresser features a handleless, push-to-open drawer design for a sleek appearance. To open a drawer, gently press on the center of the drawer front. The drawer will pop open slightly, allowing you to pull it out fully. To close, simply push the drawer back until it clicks into place.

Maintenance

• Clean the dresser surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Wipe spills immediately to prevent staining.
• Periodically check all fasteners and tighten if necessary to maintain stability.
• Avoid direct sunlight and extreme temperature changes to prevent material damage.

Troubleshooting

Drawers Not Closing/Opening Smoothly

• Check Alignment: Ensure the drawer slides are correctly aligned and installed. Refer to the assembly manual for proper orientation.
• Obstructions: Verify there are no objects obstructing the drawer's path or the slide mechanism.
• Overloading: Avoid overloading drawers, as this can cause them to stick or become difficult to operate.
• Re-assembly: If issues persist, carefully review the assembly steps for the drawers and slides. Incorrect placement of drawer components can lead to misalignment.

Dresser Instability

• Tighten Fasteners: Ensure all screws and bolts are fully tightened.
• Level Surface: Place the dresser on a flat, level surface.
• Anti-Tip Kit: Confirm the anti-tip kit is correctly installed and securely anchored to the wall.

Specifications

Warranty and Support

This product is eligible for 30-day easy returns. For any questions, missing parts, or assistance with assembly, please contact Furniway customer support. Our team is available to provide reliable support and ensure your satisfaction.

Please refer to your purchase documentation for specific warranty details and contact information.