1. Product Overview
This manual provides instructions for the assembly, use, and maintenance of your Poundex 7 Piece Counter Height Dining Set. This set includes one rectangular counter height table and six coordinating counter height chairs, designed for dining and social gatherings.
Image 1.1: The complete Poundex 7 Piece Counter Height Dining Set, featuring a rectangular table and six cross-back chairs in gray finish, suitable for dining areas.
2. Safety Information
Please read and understand all instructions before assembly and use. Keep these instructions for future reference.
- Adult Assembly Required: This product requires adult assembly. Ensure all parts are present and undamaged before beginning.
- Use on Level Surfaces: Always place the dining set on a flat, stable, and level surface to prevent tipping.
- Weight Limits: Do not exceed the recommended weight limits for the table or chairs.
- Secure All Fasteners: Periodically check and tighten all bolts and screws to ensure stability. Loose fasteners can lead to instability and injury.
- Avoid Standing on Chairs: Do not stand on the chairs. They are designed for seating only.
- Keep Away from Heat Sources: Do not place the furniture near direct heat sources or open flames.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- 1 x Counter Height Dining Table
- 6 x Counter Height Chairs
- Assembly Hardware (typically includes screws, bolts, washers, and an Allen wrench)
4. Setup and Assembly Instructions
Assembly typically requires two adults. Clear a spacious area for assembly and keep all hardware within reach.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches.
- Identify Parts: Refer to the included parts list (if provided in physical manual) to identify each component.
- Assemble Table:
- Attach table legs to the tabletop using the provided hardware. Do not fully tighten screws until all legs are in place.
- Ensure the table is stable and level, then fully tighten all fasteners.
- Assemble Chairs: (Repeat for each of the six chairs)
- Attach chair backrests to the seat frame.
- Attach chair legs to the seat frame.
- Attach any crossbars or stretchers between the legs for added stability.
- Once all parts are loosely assembled, place the chair on a flat surface and apply gentle pressure to ensure it sits evenly. Then, fully tighten all fasteners.
- Final Inspection: After assembling all pieces, double-check that all screws and bolts are securely tightened.
Image 4.1: The Poundex 7 Piece Counter Height Dining Set, shown without decorative items, illustrating the assembled table and chairs.
5. Operating and Usage
This dining set is designed for indoor use in dining rooms or kitchens. It provides seating for up to six individuals.
- Seating: The chairs are designed for comfortable seating. The upholstered seats and cross-back design provide support.
- Table Surface: The table surface is suitable for meals, work, or other activities. Consider using placemats or coasters to protect the surface from spills and heat.
- Movement: When moving the table or chairs, lift them rather than dragging to prevent damage to the furniture and flooring.
Image 5.1: Front view of a single counter height chair, highlighting the upholstered seat with nail head trim and the cross-back design.
6. Maintenance and Care
Proper care will extend the life and appearance of your dining set.
- Cleaning: Wipe the wood surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
- Upholstery Care: For upholstered seats, spot clean with a mild fabric cleaner as needed. Test in an inconspicuous area first.
- Spills: Clean spills immediately to prevent staining.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
- Humidity: Maintain a consistent humidity level in your home to prevent wood from cracking or warping.
- Fastener Check: Periodically check and retighten all assembly fasteners to ensure the furniture remains stable.
7. Troubleshooting
Common issues and their potential solutions:
- Wobbly Table/Chair:
- Ensure all fasteners are securely tightened.
- Place the item on a level surface. If still wobbly, loosen all fasteners slightly, press down firmly on the item to level it, then retighten.
- Loose Screws/Bolts:
- Tighten any loose hardware using the appropriate tool. Do not overtighten.
- Scratches on Surface:
- Minor scratches can sometimes be concealed with furniture polish or touch-up pens matching the wood finish.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Poundex |
| Model Number | F2639 |
| Material | Wood |
| Color | Grey |
| Table Dimensions (L x W x H) | 60 x 36 x 36 inches |
| Item Weight | 196 pounds (total set) |
| UPC | 742169109193 |
| Product Care Instructions | Wipe with Damp Cloth |
Image 8.1: Dimensional diagram illustrating the width, depth, and height measurements for both the counter height dining table and a single chair.
9. Warranty and Support
Poundex products are manufactured with quality and care. For specific warranty details or customer support inquiries, please refer to the warranty card included with your purchase or contact Poundex directly through their official website or retailer where the product was purchased.
For further assistance, please visit the Poundex Store on Amazon.
