Clek FL19U1

Clek Fllo Convertible Car Seat User Manual

Model: FL19U1

Brand: Clek

Introduction

This manual provides essential instructions for the safe and proper use, installation, and maintenance of your Clek Fllo Convertible Car Seat. Please read this manual thoroughly before using the car seat and keep it in a safe place for future reference. The Clek Fllo is designed to offer superior safety and comfort for your child, supporting extended rear-facing use and compact design for versatile vehicle installations.

Clek Fllo Convertible Car Seat, front view

Image: Front view of the Clek Fllo Convertible Car Seat in Edge Ziip color, showcasing its compact design and harness system.

Important Safety Information

Always prioritize your child's safety. Failure to follow these instructions can result in serious injury or death. This car seat is designed for children within specific weight and height limits as detailed in the specifications section.

  • Never use a car seat that has been involved in a moderate to severe crash, even if there is no visible damage.
  • Always secure your child in the car seat using the 5-point harness system.
  • Ensure the car seat is correctly installed in your vehicle according to the instructions for either rear-facing or forward-facing modes.
  • Do not modify the car seat in any way. Use only Clek-approved parts and accessories.
  • Register your car seat with Clek to receive important safety notices and recall information.

Setup and Installation

The Clek Fllo Convertible Car Seat supports both rear-facing and forward-facing installations. Proper installation is crucial for safety.

Rear-Facing Installation

The Clek Fllo is designed for extended rear-facing use for children weighing 14 to 50 pounds and up to 43 inches tall. Rear-facing is the safest position for infants and toddlers.

Clek Fllo Car Seat with Steel Anti-Rebound Bar and showing extended rear-facing design

Image: The Clek Fllo car seat demonstrating its Steel Anti-Rebound Bar and design for extended rear-facing use.

  • Steel Anti-Rebound Bar: Attach the steel anti-rebound bar as instructed in the full product manual. This bar helps prevent rotation of the car seat in a collision, enhancing safety.
  • Integrated Flip Foot: Utilize the integrated flip foot for proper recline angle in rear-facing installations. Ensure the recline indicator is within the acceptable range for your child's weight and age.
Clek Fllo Car Seat showing integrated flip foot for rear-facing installations

Image: Close-up view of the Clek Fllo car seat's integrated flip foot, essential for achieving the correct recline angle in rear-facing mode.

Forward-Facing Installation

The Clek Fllo can be used forward-facing for children weighing 26.5 to 65 pounds and up to 49 inches tall. Always use the top tether when installing forward-facing.

  • Refer to your vehicle's owner's manual for proper top tether anchor locations.
  • Ensure the car seat is snug against the vehicle seat back and does not move more than one inch side-to-side or front-to-back at the belt path.

3-Across Seating

The compact design of the Clek Fllo allows for 3-across seating in many vehicles. Always verify proper installation and fit for each car seat in your specific vehicle.

Three Clek Fllo car seats installed side-by-side in a vehicle, demonstrating 3-across seating capability

Image: Three Clek Fllo car seats installed across the back seat of a vehicle, illustrating its compact design for 3-across installations.

Operating Instructions

Securing Your Child

The Clek Fllo uses a 5-point harness system to secure your child.

  • Harness Height: Adjust the harness straps to be at or just below the child's shoulders for rear-facing, and at or just above the child's shoulders for forward-facing. The adjustable headrest also adjusts harness height.
  • Harness Tightness: The harness should be snug against your child's body. You should not be able to pinch any excess webbing at the child's collarbone.
  • Chest Clip: Position the chest clip at armpit level.
Clek Fllo Car Seat showing adjustable headrest and side-impact protection features

Image: Detail of the Clek Fllo car seat's adjustable headrest and integrated side-impact protection, crucial for child safety and comfort.

Recline Positions

The Clek Fllo offers 11 reclining positions. Adjust the recline to ensure your child is comfortable and the car seat is properly angled for safety, especially in rear-facing mode.

Maintenance and Care

Cleaning the Fabric

The Clek Fllo features Ziip zipper-removable fabric for easy cleaning.

Close-up of the Clek Fllo car seat's Ziip zipper-removable fabric for easy cleaning

Image: Detail of the Ziip feature on the Clek Fllo car seat, highlighting the zipper for easy removal of fabric covers for washing.

  • Unzip and remove the fabric covers as instructed in the full product manual.
  • Machine wash the fabric covers on a gentle cycle with cold water and mild detergent. Do not use bleach.
  • Hang to dry or tumble dry on low heat. Ensure covers are completely dry before reattaching.
  • The fabric is Flame Retardant-Free, PFOA-Free, PFOS-Free, PFC-Free, and PFAS-free.

Cleaning the Harness and Buckle

  • Wipe harness straps with a damp cloth. Do not machine wash or submerge harness straps in water, as this can weaken the webbing.
  • Clean the buckle by flushing it with warm water if food or debris causes it to stick.

Inspection

  • Regularly inspect the car seat for any signs of damage, wear, or missing parts.
  • Check that all components, including the harness, buckles, and LATCH connectors, are functioning correctly.

Troubleshooting

This section addresses common issues you might encounter with your Clek Fllo car seat.

ProblemPossible CauseSolution
Car seat feels loose after installation.Improper tightening of LATCH belt or vehicle seat belt.Re-install the car seat, ensuring it does not move more than one inch at the belt path. Apply pressure to the car seat while tightening.
Harness straps are difficult to tighten or loosen.Harness webbing is twisted or buckle is obstructed.Untwist harness straps. Clean the buckle if necessary. Ensure child's clothing is not interfering.
Chest clip slides down.Incorrect positioning.Always position the chest clip at armpit level.
Car seat recline angle is incorrect for rear-facing.Flip foot not properly engaged or vehicle seat angle.Adjust the integrated flip foot. If necessary, use a rolled towel or pool noodle under the car seat base to achieve the correct recline angle, as permitted by your vehicle and car seat manuals.

If you encounter issues not listed here, please refer to the full product manual or contact Clek customer support.

Specifications

FeatureDetail
Model NumberFL19U1
Product Dimensions12.5 x 16.9 x 26 inches
Item Weight34.9 pounds
Maximum Weight Recommendation65 Pounds
Maximum Height Recommendation49 Inches
Rear-Facing Minimum Child Weight14 Pounds
Rear-Facing Maximum Child Weight50 Pounds
Forward-Facing Minimum Child Weight26.5 Pounds
Forward-Facing Maximum Child Weight65 Pounds
Harness Type5-Point
Number of Reclining Positions11
Material TypeMetal (frame), 100% Polyester (fabric)
Installation TypeLATCH / Vehicle Seat Belt
OrientationRear Facing, Forward Facing
Special FeaturesSteel Anti-Rebound Bar, Energy Absorbing Crumple Technology (EACT), Adjustable Headrest, Side-Impact Protection, Integrated Flip Foot, Ziip zipper-removable fabric, Flame Retardant-Free fabric.
Aircraft ApprovedYes

Diagram illustrating Energy Absorbing Crumple Technology (EACT) in the Clek Fllo car seat

Image: Diagram showing the internal structure and function of the Energy Absorbing Crumple Technology (EACT) within the car seat, designed to absorb crash forces.

Warranty and Support

Clek offers a comprehensive warranty for the Fllo Convertible Car Seat.

  • Lifetime Extended Warranty: Register your car seat online within 90 days of purchase to qualify for the Lifetime Extended Warranty.
  • Expiration: The car seat has a 9-year expiration date from the date of manufacture. Always check the label on your car seat for the exact date.
Clek Fllo car seat installed in a vehicle, with icons indicating Lifetime Extended Warranty, 9 Year Expiration, and Aircraft Approved status

Image: The Clek Fllo car seat in use, accompanied by icons highlighting its Lifetime Extended Warranty (upon registration), 9-year expiration, and aircraft approval.

For further assistance, product registration, or to view the full warranty details, please visit the official Clek website or contact their customer support.

Clek Official Website: clekinc.com

© 2025 Clek. All rights reserved. This manual is for informational purposes only.

Related Documents - FL19U1

Preview 2017 Clek Foonf Car Seat Instruction Manual
This is the official instruction manual for the 2017 Clek Foonf car seat. It provides detailed guidance on rear-facing and forward-facing installation, child securing, safety warnings, size and age limits, and maintenance for optimal child safety.
Preview 2017 Clek Fllo Car Seat Instruction Manual & Safety Guide
Comprehensive guide for the 2017 Clek Fllo car seat, detailing installation, safety features, usage guidelines, and important warnings for rear-facing and forward-facing modes. Includes information on registration and care.
Preview Manuel d'instructions du siège d'auto Clek Fllo
Ce manuel d'instructions détaille l'installation et l'utilisation sécuritaire du siège d'auto Clek Fllo pour enfants, couvrant les modes dos à la route et face à la route, les avertissements de sécurité essentiels et les réglages.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.