KINDEEP BT001

KINDEEP Air Tracker Tag

User Manual - Model BT001

1. Introduction

The KINDEEP Air Tracker Tag is a compact Bluetooth item finder designed to help you locate your valuable items using the Apple Find My app on your iOS devices. This device provides seamless integration with the Find My network, offering features such as nearby finding, left-behind notifications, and lost mode to ensure you can always keep track of your belongings.

KINDEEP Air Tracker Tag, white, with a loop for attachment.

A white, compact KINDEEP Air Tracker Tag, designed for attaching to items. It features a central circular area with the KINDEEP logo and a small loop at the top for keyrings or lanyards.

2. Product Features

  • Apple Find My Integration: Works exclusively with the Apple Find My app on iOS devices (iOS only, Android not supported).
  • Precise Location Tracking: Locate items within Bluetooth range (up to 200 ft/60m) or view their last known location on a map.
  • Audible Alert: Built-in speaker emits a loud sound (80-100 dB) to help pinpoint items.
  • Left-Behind Notifications: Receive instant alerts on your iOS device if you leave your tracked item behind.
  • Lost Mode: Enable Lost Mode to display contact information to anyone who finds your tag.
  • Voice Control: Use Siri to help locate your items.
  • Water-Resistant: IP67 rated for protection against dust and water splashes.
  • Replaceable Battery: Powered by a CR2032 battery with up to 1 year of battery life.

3. Package Contents

  • 1 x KINDEEP Air Tracker Tag
  • 1 x CR2032 Battery (pre-installed or included)
  • 1 x User Manual (this document)

4. Setup Guide

4.1. Initial Activation

Your KINDEEP Air Tracker Tag comes with a CR2032 battery. If the battery is not pre-installed, please refer to Section 6.1 for installation instructions. The device is ready for pairing once the battery is active.

4.2. Pairing with Apple Find My App

  1. Ensure your iOS device (iPhone, iPad, or iPod touch) is running the latest version of iOS/iPadOS.
  2. Open the Find My app on your iOS device.
  3. Tap the Items tab at the bottom of the screen.
  4. Tap + (Add Item) and then select Add Other Item.
  5. Bring your KINDEEP Air Tracker Tag close to your iOS device. The device should be detected within 30 seconds.
  6. Follow the on-screen instructions to name your item and assign an emoji.
  7. Confirm the pairing. Your KINDEEP Air Tracker Tag is now linked to your Apple ID and visible in the Find My app.
iPhone displaying the Apple Find My app with a KINDEEP tracker on a map.

An iPhone screen showing the Apple Find My application. A map displays the location of a KINDEEP tracker, identified as 'Wallet', with options to 'Stop Sound' or get 'Directions'. This illustrates the seamless integration with Apple's tracking ecosystem.

5. Operating Instructions

5.1. Finding Nearby Items

When your KINDEEP Air Tracker Tag is within Bluetooth range (up to 200 ft/60m), you can make it play a sound to help you locate it.

  1. Open the Find My app.
  2. Go to the Items tab.
  3. Select your KINDEEP Air Tracker Tag from the list.
  4. Tap Play Sound. The tracker will emit a loud beep (80-100 dB) to guide you.
  5. Tap Stop Sound once you've found your item.
iPhone displaying the Find Nearby feature for the KINDEEP tracker.

A hand holding an iPhone displaying the 'Find Nearby' interface within the Find My app. It shows a signal strength indicator and text indicating the tracker is '15 ft to your left', with sound waves emanating from a wallet in the background, demonstrating the precision finding capability.

5.2. Using Map Navigation

If your item is out of Bluetooth range, you can view its last known location on the Find My map.

  1. Open the Find My app.
  2. Go to the Items tab.
  3. Select your KINDEEP Air Tracker Tag.
  4. Tap Directions to get navigation to the last recorded location of your item.

5.3. Left-Behind Notifications

To receive alerts when you leave your item behind:

  1. Open the Find My app.
  2. Go to the Items tab.
  3. Select your KINDEEP Air Tracker Tag.
  4. Under 'Notifications', toggle on Notify When Left Behind.
  5. You can also set 'New Location' exceptions where you don't want to be notified (e.g., your home).
KINDEEP tracker with keys and an iPhone notification for 'Left Behind'.

A KINDEEP tracker attached to a set of keys, with an iPhone notification bubble stating 'Keys' Left Behind 20 minutes ago. This highlights the feature that alerts users when they leave their tracked items behind.

5.4. Lost Mode

If your item is truly lost, you can enable Lost Mode to help others return it to you.

  1. Open the Find My app.
  2. Go to the Items tab.
  3. Select your KINDEEP Air Tracker Tag.
  4. Under 'Lost Mode', tap Enable.
  5. Follow the prompts to enter a phone number or email address where you can be contacted.
  6. You can also choose to be notified when your item is found.

5.5. Voice Control with Siri

Once paired, you can ask Siri to help locate your KINDEEP Air Tracker Tag. For example, say: "Hey Siri, where's my [item name]?" (e.g., "Where's my wallet?").

6. Maintenance

6.1. Battery Replacement

The KINDEEP Air Tracker Tag uses a standard CR2032 coin cell battery, which typically lasts up to one year. The Find My app will notify you when the battery is low.

  1. Locate the battery compartment on the back of the tracker.
  2. Use a small tool (e.g., a coin or flathead screwdriver) to gently twist open the battery cover.
  3. Remove the old CR2032 battery.
  4. Insert a new CR2032 battery with the positive (+) side facing up.
  5. Align the battery cover and twist it back into place until it is securely closed.
Exploded view of the KINDEEP tracker showing internal components and battery.

An exploded diagram of the KINDEEP tracker, revealing its internal components including a smart chip and a CR2032 battery. This image emphasizes the precision tracking and reliable signal due to its optimized internal design.

6.2. Cleaning

Wipe the KINDEEP Air Tracker Tag with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.

6.3. Water Resistance

The KINDEEP Air Tracker Tag has an IP67 rating, meaning it is resistant to dust and can withstand immersion in water up to 1 meter for 30 minutes. However, it is not waterproof. Avoid prolonged submersion or exposure to high-pressure water jets.

7. Troubleshooting

7.1. Tracker Not Connecting/Pairing

  • Ensure Bluetooth is enabled on your iOS device.
  • Make sure the KINDEEP Air Tracker Tag is within close proximity to your iOS device during pairing.
  • Check the battery. A low or dead battery can prevent connection. Replace if necessary.
  • Restart your iOS device and try pairing again.

7.2. No Sound When Playing Alert

  • Ensure the tracker is within Bluetooth range of your iOS device.
  • Check the battery level. A very low battery might not have enough power for the speaker.
  • Verify that the sound is enabled in the Find My app for the specific item.

7.3. Inaccurate Location

  • Location accuracy depends on the Find My network. In areas with fewer Apple devices, location updates might be less frequent.
  • Ensure your iOS device has a stable internet connection (Wi-Fi or cellular data) for accurate map updates.

8. Specifications

ParameterValue
Model NumberBT001
Dimensions1.48in / 37.8mm (Size), 0.3in / 8.4mm (Thickness)
Weight2.72 ounces
ConnectivityBluetooth
Working RangeUp to 200 ft / 60m
Battery TypeCR2032 (replaceable)
Battery LifeUp to 1 year
Sound Output80-100 dB
Water ResistanceIP67
CompatibilityApple iOS ONLY (Find My app)

9. Warranty and Support

9.1. Warranty Information

Please refer to the product packaging or the retailer's website for specific warranty details and duration. Typically, electronic devices come with a limited manufacturer's warranty covering defects in materials and workmanship.

9.2. Customer Support

For technical assistance, troubleshooting, or warranty claims, please contact KINDEEP customer support through the retailer's platform or the official KINDEEP website. Have your product model number (BT001) and purchase information ready when contacting support.

Related Documents - BT001

PreviewBT001-60 Vanity and FELIX-1660S Fireplace Specifications
Technical specifications and dimensional drawings for the BT001-60 vanity and the FELIX-1660S fireplace. Includes detailed measurements for installation and product understanding.
PreviewKindeep BT001 Smart Tag User Manual and Guide
User manual for the Kindeep BT001 Smart Tag, a tracker compatible with Apple's Find My network. Includes setup, battery replacement, safety warnings, and regulatory information.
PreviewBT001-72DD, FELIX-1672D, BT001-36L, BT001-36R Vanity Dimensions and Specifications
Technical specifications and dimensional drawings for vanity models BT001-72DD, FELIX-1672D, BT001-36L, and BT001-36R. Includes detailed measurements for cabinets, drawers, and overall unit sizes.
PreviewBT001-84D, FELIX-1684D, BT001-42L, BT001-42R Vanity and Fireplace Specifications
Technical specifications and dimensional drawings for BT001-84D vanity, FELIX-1684D fireplace, BT001-42L left-hand vanity, and BT001-42R right-hand vanity.
PreviewFELIX-1684D and BT001-42L Vanity Dimensions and Specifications
Detailed dimensions and specifications for the FELIX-1684D fireplace and BT001-42L vanity models, including measurements in both millimeters and inches.
PreviewBT001-36 and FELIX-1636 Vanity Dimensions and Specifications
Detailed dimensions and specifications for BT001-36, BT001-36L, and FELIX-1636 vanity models, including measurements for cabinets, drawers, and basins.