Bestier 63" Fireplace TV Stand for TVs Up to 70", RGB Remote Electric Fireplace Entertainment Center, Black (Model L105516A-2-2)

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Bestier 63-inch Fireplace TV Stand. Please read all instructions carefully before assembly and use to ensure safe and proper functionality. Keep this manual for future reference.

Important Safety Information

• Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons.
• Do not operate the fireplace if the cord or plug is damaged, or if the heater has been dropped or damaged in any manner.
• Ensure proper ventilation around the fireplace insert. Do not block air vents.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater.
• This product is designed for indoor use only.
• The TV stand and fireplace insert ship in two separate packages. Ensure all packages have arrived before beginning assembly.

Package Contents

Before beginning assembly, verify that all parts listed below are present. Refer to the assembly video for visual identification of components and hardware.

Figure 1: The Bestier 63-inch Fireplace TV Stand.

Main Components:

• TV Stand Panels (various sizes and shapes)
• Electric Fireplace Insert
• Textured Transparent Doors (2 units)
• Glass Shelves (2 units)
• RGB LED Light Strips and Controller
• Fireplace Remote Control
• LED Remote Control

Hardware:

Various screws, dowels, cam locks, cam bolts, hinges, and anti-tip hardware are included. Please refer to the detailed parts list in your physical manual or the assembly video for exact quantities and types.

Setup and Assembly

Assembly requires two people. Please follow the steps carefully. All parts are clearly numbered for easy identification.

Step-by-Step Assembly Guide:

1. Prepare Base Panels: Attach cam bolts and wooden dowels to the designated holes on the bottom panels. Ensure they are securely fastened.
2. Assemble Side Supports: Connect the side support panels to the base panels using cam locks and dowels. Ensure a tight fit.
3. Install Back Support Beams: Secure the back support beams between the side supports and base panels using screws and cam locks.
4. Attach Top Panels: Fasten the top panels to the assembled structure using cam locks and dowels.
5. Install LED Strips: Carefully attach the RGB LED light strips to the underside of the top panels and inside the open compartments using the provided clips and screws. Route the wiring as shown in the video.
   

   Figure 2: LED strip installation and wiring.

6. Insert Fireplace: Carefully slide the electric fireplace insert into the central opening of the TV stand. Secure it with the provided screws.
   

   Figure 3: Fireplace insert installation.

7. Install Glass Shelves: Place the glass shelves into the designated slots within the side compartments.
8. Attach Doors: Install the hinges and then attach the textured transparent doors to the side compartments. Ensure the push-to-open mechanism functions correctly.
9. Connect LED Controller: Connect the LED light strips to the LED controller and insert batteries into the LED remote.
10. Anti-Tip Kit Installation: For safety, secure the TV stand to the wall using the provided anti-tip hardware. Mark the wall, drill pilot holes, insert anchors, and attach the straps to both the stand and the wall.

Operating Instructions

Electric Fireplace Operation

The electric fireplace can be operated using the control panel on the unit or the included remote control.

• Power On/Off: Press the power button on the control panel or remote to turn the fireplace on or off.
• Temperature Adjustment: Use the temperature controls to set the desired heat output between 62°F and 92°F. The unit provides 1500W high-power heating, covering up to 400 sq. ft.
• Timer Function: Set the automatic shut-off timer from 0.5 to 9 hours.
• Flame Colors: Choose from 7 flame colors to match your ambiance.
• Flame Brightness & Speed: Adjust the flame brightness (5 levels) and speed (5 settings) for a realistic 3D flame effect.
• Flame-Only Mode: The fireplace can operate in flame-only mode without heat, allowing for year-round ambiance.
• Overheat Protection: The unit is equipped with PTC overheat protection for safety.
• Power-off Memory: The fireplace retains the last settings after being powered off.

Figure 4: Fireplace control panel and features.

Figure 5: Flame color, brightness, and speed options.

RGB LED Lighting Operation

The integrated RGB LED lighting in the side compartments is controlled by a separate remote control.

• Color Selection: Choose from 7 main colors.
• Dynamic Modes: Select from 22 dynamic lighting modes to create different atmospheres.
• Brightness & Speed: Adjust the brightness and speed of the dynamic modes using the remote.

Figure 6: RGB LED lighting features and remote control.

Storage Features

The TV stand includes two cabinets with textured transparent doors and glass shelves, providing both open and closed storage options. The doors feature a convenient push-to-open mechanism.

Figure 7: Storage features including push-to-open doors and glass shelves.

Maintenance

Cleaning

• Wood Surfaces: Wipe with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Glass Doors: Use a glass cleaner and a soft cloth to prevent streaks.
• Fireplace Insert: Ensure the unit is unplugged and cool before cleaning. Wipe the exterior with a soft, damp cloth. Do not spray water directly onto the unit.

General Care

• Regularly check all screws and connections to ensure they remain tight.
• Avoid placing hot items directly on the surface without protective pads.
• Keep the unit away from direct sunlight and excessive moisture.

Troubleshooting

Specifications

• Brand: Bestier
• Model Name: L105516A-2-2
• Color: Black
• Material: Engineered Wood
• Product Dimensions: 62.99"W x 13.78"D x 23.94"H
• Item Weight: 82.5 pounds
• Power Source: Corded Electric
• Heating Power: 1500W (5120 BTU)
• Heating Coverage: Up to 400 sq. ft.
• Temperature Range: 62°F - 92°F
• Special Features: Child Lock, Glass Shelves, RGB LED Light, Overheating Protection, Power-off Memory
• TV Size Compatibility: Up to 70 inches
• Weight Capacity: 200 lbs (top surface)
• Certifications: UL and CSA compliant

Figure 8: Product dimensions and TV size compatibility.

Warranty and Support

For any questions, missing parts, or concerns regarding your Bestier Fireplace TV Stand, please contact Bestier customer support. Refer to your purchase documentation or the Bestier website for contact information.

This product conforms to UL and CSA standards, ensuring safety and quality.