WOODBRIDGE 56-60" W x 80" H Frameless Double Sliding Soft-Close Shower Door

WOODBRIDGE 56-60" W x 80" H Frameless Double Sliding Soft-Close Shower Door Instruction Manual

Model: 56-60" W x 80" H Frameless Double Sliding Soft-Close Shower Door

Brand: WOODBRIDGE

Introduction and Product Overview

This manual provides detailed instructions for the installation, operation, and maintenance of your WOODBRIDGE 56-60" W x 80" H Frameless Double Sliding Soft-Close Shower Door. Please read all instructions carefully before beginning installation to ensure safe and proper setup.

Your shower door features 3/8" (10mm) ANSI Z97.1 certified tempered safety glass with an explosion-proof film for enhanced safety. The design includes a soft-close damping system, adjustable width, and a water-barrier threshold to ensure a secure and functional shower enclosure.

Key features of the Woodbridge shower door including 80 inch height, explosion-proof film, 10mm tempered glass, 304 stainless steel, double sliding, soft-close system, seal strip, and easy to clean.

Image: Overview of key product features.

Safety Information

Always handle glass panels with care. Tempered glass, while strong, can shatter if struck at the edges or corners. The integrated explosion-proof film helps contain glass fragments in the event of breakage, reducing the risk of injury.

Ensure all mounting hardware is securely fastened to structural supports. Improper installation can lead to product failure and potential injury.

Shatterproof and tempered safety glass with explosion-proof film. Image shows a hammer hitting glass, with the safety film preventing shattering.

Image: Demonstration of the explosion-proof safety film on tempered glass.

Comparison of Woodbridge ultra clear glass with explosion-proof film versus common glass without, showing how the film prevents scattering of fragments.

Image: Comparison of glass with and without explosion-proof film.

Setup and Installation

The WOODBRIDGE shower door is designed for a width range of 56-60 inches and a height of 80 inches. The stainless steel top guide bar can be trimmed by up to 4 inches for precise width adjustment. A minimum curb depth of 3-1/4 inches is required for correct installation of the water-barrier threshold.

The product includes two sliding glass doors, towel bars, all necessary mounting hardware, and step-by-step installation instructions. Professional installation is recommended due to the weight and fragility of the glass panels.

Key Installation Considerations:

  • Adjustable Width: The top guide bar can be cut to fit openings between 56 and 60 inches.
  • Curb Requirement: Ensure your shower curb has a minimum depth of 3-1/4 inches for proper water containment.
  • Wall Preparation: Walls must be plumb and structurally sound to support the weight of the glass doors.
Technical diagram showing dimensions of the Woodbridge shower door, including model width 56-60 inches, product height 80 inches, access width 23.5-27.5 inches, access height 75.75 inches, door width 31 inches, glass thickness 3/8 inch (10mm), and minimum threshold required 3-1/4 inches.

Image: Dimensional diagram for installation planning.

Illustration of the 4-inch adjustable width feature, showing how the aluminum frame allows for customization by cutting the top and bottom rails.

Image: Adjustable width feature for custom fitting.

Diagram illustrating the enhanced water-sealing system with high-quality sealing strip and anti-splash bottom design, showing wet and dry areas and the minimum 3-1/4 inch threshold requirement.

Image: Water-barrier threshold and sealing system.

Comparison image showing the Woodbridge shower door with an 80-inch total height and 75-3/4 inch entry height, contrasted with a shorter 70-inch entry height shower door.

Image: Tall walk-in entry height for user comfort.

Operating Instructions

Your WOODBRIDGE shower door features a double-sliding design, allowing access from either the left or right side. The integrated soft-close damping system ensures smooth and quiet operation, preventing abrupt slamming of the doors.

Using the Shower Door:

  • Sliding Operation: Gently push or pull the door panels using the stainless steel handles to open or close.
  • Soft-Close Feature: As the doors approach the closed position, the damping mechanism will engage, slowing the door movement for a soft and silent close.
  • Reversible Entry: Both panels are designed to slide, providing flexible entry and exit options.
Image showing the dual ways opening and double sliding feature of the shower door, with arrows indicating movement from both sides. Also highlights dual-sided towel racks and stainless steel handles.

Image: Dual sliding doors for flexible access.

Detailed illustration of the soft-close damping system, showing the mechanism that absorbs shocks and prevents slamming for quiet operation.

Image: Soft-close damping system detail.

Maintenance and Care

Regular cleaning will help maintain the appearance and functionality of your shower door. The tempered glass is designed to be easy to clean and resistant to water spots.

Cleaning Recommendations:

  • Glass Panels: Use a soft cloth or sponge with a non-abrasive glass cleaner. For best results, wipe down the glass after each use to prevent water spot buildup. Avoid harsh chemicals or abrasive pads that could damage the glass or explosion-proof film.
  • Hardware: Clean metal components (frame, handles, rollers) with a soft, damp cloth and mild soap. Do not use abrasive cleaners or scouring pads, as these can scratch the brushed nickel finish.
  • Seals: Periodically check the sealing strips for wear and tear. Clean them gently to ensure they remain effective in preventing water leakage.

Troubleshooting

This section addresses common issues you might encounter with your shower door. If you experience problems not listed here, please contact customer support.

Common Issues and Solutions:

ProblemPossible CauseSolution
Doors do not slide smoothly.Debris in track, worn rollers, misaligned track.Clean the top and bottom tracks. Inspect rollers for damage and replace if necessary. Check track alignment and adjust if loose.
Water leaks from the bottom of the door.Damaged or improperly installed sealing strip, insufficient curb depth.Inspect and re-seat or replace the sealing strip. Ensure the minimum 3-1/4 inch curb depth requirement was met during installation.
Soft-close mechanism not engaging properly.Obstruction, mechanism misalignment.Check for any obstructions in the soft-close mechanism area. Ensure the mechanism is properly aligned with the door's travel path.

Specifications

FeatureDetail
BrandWOODBRIDGE
Model Width56-60 inches (Adjustable)
Product Height80 inches
Walk-in Access Width23.5-27.5 inches
Glass Thickness3/8 inch (10mm)
Glass TypeTempered Safety Glass with Explosion Proof Film (ANSI Z97.1 Certified)
FinishBrushed Nickel
MaterialGlass, Aluminum, Stainless Steel
Door TypeFrameless Double Sliding
Special FeaturesSoft-Close Damping System, Reversible Sliding Entry, Water-Barrier Threshold
Minimum Curb Depth Required3-1/4 inches
Item Weight190 Pounds
Assembly RequiredYes

Warranty and Support

WOODBRIDGE stands behind the quality of its products. Your shower door comes with the following warranty:

  • Glass: Lifetime warranty
  • Hardware: 1-year limited warranty

You can register your product online to receive an additional year of hardware protection. For any questions, technical assistance, or warranty claims, please contact WOODBRIDGE customer support. Our US-based team is available to provide fast and reliable assistance.

Contact Information: Please refer to the contact details provided in your product packaging or visit the official WOODBRIDGE website for support.

© 2026 WOODBRIDGE. All rights reserved.

Related Documents - 56-60" W x 80" H Frameless Double Sliding Soft-Close Shower Door

Preview WOODBRIDGE Frameless Single Sliding Shower Door - SEAZ-6080 Series Dimensions and Specifications
Detailed specifications and dimensions for the WOODBRIDGE SEAZ-6080 series frameless single sliding shower door. Features 3/8" (10mm) tempered glass, adjustable width from 56" to 60", and a height of 80".
Preview WOODBRIDGE COVZ-4872 Shower Door Dimensions Guide | LS692 LS698
Detailed dimension guide for the WOODBRIDGE COVZ-4872 sliding shower door, available in Brushed Nickel and Matte Black finishes. This guide covers model numbers LS692 and LS698, providing essential measurements for Model Width (44"-48"), Product Height (72"), Access Width (18-1/8"-22-1/8"), Access Height (68-1/4"), and Door Width (23"). Includes glass thickness and minimum threshold requirements.
Preview Woodbridge LT665 Bidet Toilet: Dimensions and Installation Guide
Detailed technical specifications and installation guidance for the Woodbridge LT665 (EBT-WH01) 1-piece bidet toilet, including dimensions, rough-in requirements, and electrical safety instructions.
Preview WOODBRIDGE GT071 Electronic Bidet Toilet: Installation and Care Guide
Comprehensive installation and care guide for the WOODBRIDGE GT071 Electronic Bidet Toilet, covering setup, safety, features, maintenance, and troubleshooting.
Preview Woodbridge Shower Door Installation Manual - SURFK4880, SURFK6080, SURFK6062
Comprehensive installation manual for Woodbridge shower doors, including model numbers SURFK4880, SURFK6080, and SURFK6062. Provides step-by-step instructions, safety warnings, parts list, and warranty information.
Preview WoodBridge Shower and Tub Door Installation Manual (REFT4880, REFT6080, REFT6062)
Installation guide for WoodBridge shower and tub doors (Models REFT4880, REFT6080, REFT6062). Includes safety warnings, parts list, and step-by-step assembly instructions.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.