1. Introduction
The FOLOKE LED Light Therapy Mask is designed for home use to improve various skin concerns through advanced light therapy. This device utilizes specific wavelengths of red (630±5nm) and near-infrared (830nm) light to support skin rejuvenation, reduce the appearance of wrinkles, and promote overall skin health. Its ergonomic and portable design ensures comfortable and convenient use.
2. Safety Information
- Do not use the device if you have a history of light-induced seizures or epilepsy.
- Consult a physician before use if you are pregnant, breastfeeding, or have any serious medical conditions.
- Avoid direct eye exposure to the LED lights. Use the provided eye protection during treatment.
- Perform a skin sensitivity test before the first use. Apply the device to a small area of skin (e.g., inner arm) for 10 minutes. If any adverse reactions such as excessive redness, itching, or discomfort occur, discontinue use immediately.
- Do not use on broken, irritated, or infected skin.
- Keep out of reach of children.
- Do not immerse the device in water. Clean with a soft, dry cloth.
- Discontinue use if the device becomes excessively hot or shows any signs of damage.
3. Product Overview and Features
The FOLOKE LED Light Therapy Mask is designed with user comfort and effectiveness in mind. Key features include:
- Red Light (630±5nm) & Near-Infrared (830nm) Wavelengths: Specifically chosen wavelengths to target various skin concerns, including wrinkle reduction and skin rejuvenation.
- Ergonomic Design with Premium Materials: Constructed from high-quality, flexible silicone with adjustable straps for a perfect and comfortable fit on various face shapes and sizes.
- 3-in-1 Fusion LED Beads: Enhances the convergence effect of light waves, improving energy efficiency for comprehensive skin improvement.
- Portable and Hands-Free: Allows for convenient skincare sessions anytime, anywhere, whether relaxing, working, or traveling.
- User-Friendly Control System: Features a modern Type-C charging port, 5 adjustable brightness levels, and preset 10-minute sessions for an efficient routine.
- Comprehensive Skincare Solution: Addresses various skin concerns for all skin types, promoting a natural, youthful glow.
Image: The FOLOKE LED Light Therapy Mask, showcasing its flexible design, remote control, and charging cable.
4. Setup
- Charge the Device: Before first use, fully charge the device. A full charge typically takes 3-4 hours via the Type-C port. The indicator lights on the controller will show charging status and turn off when charging is complete.
- Attach Straps: Securely attach the adjustable straps to the mask for a comfortable and snug fit.
- Connect Controller: Connect the mask's cable to the remote control unit.
- Eye Protection: Ensure the soft eye pads are correctly positioned to block light for the eyes during treatment.
Image: Visual guide demonstrating the setup process, including connecting the controller and adjusting the mask.
5. Operating Instructions
- Prepare Skin: Clean and dry your face and hands thoroughly, ensuring no makeup or dirt is present.
- Apply Mask: Gently place the mask over your face, adjusting the straps for a comfortable fit.
- Power On: Press and hold the power button on the remote control to turn on the device. The default session time is 10 minutes.
- Select Light Mode: Use the mode button on the remote to cycle through the available light colors (Red, Blue, Green, Yellow, Purple, Cyan, White) to target specific skin concerns.
- Adjust Brightness: Use the intensity buttons (D1-D5) to select your desired brightness level. Start with a lower intensity and gradually increase as your skin adapts.
- Begin Treatment: Relax for the duration of the session (preset to 10 minutes). For best results, perform treatments 3-5 times per week for 15-20 minutes each time, for a duration of 4 to 6 weeks. Adjust as needed for maintenance.
- Post-Treatment: After the session, remove the mask and apply your favorite moisturizer to your skin.
Video: Official FOLOKE guide on how to use the LED Face Mask, demonstrating the setup and operation of the device.
6. Light Therapy Modes
The FOLOKE LED Light Therapy Mask offers 7 distinct light modes, each with specific benefits for various skin concerns:
- Nano Red Light (630nm): Rejuvenates, brightens, and lightens spots. Boosts collagen production, smooths fine lines, and improves skin elasticity.
- Nano Blue Light (460nm): Reduces acne by killing bacteria and calming breakouts.
- Nano Green Light (520nm): Balances oil secretion, stabilizes skin oil production, and refines pores.
- Nano Yellow Light (520nm + 630nm): Dual repairing, improves cell oxygenation, promotes lymphatic detoxification, and reduces pigmentation.
- Nano Purple Light (630nm + 460nm): Enhances cellular energy, helps with acne and acne scarring, and promotes skin repair.
- Nano Cyan Light (520nm + 460nm): Enhances metabolism, improves cell vitality, and promotes overall skin health.
- Nano White Light (630nm + 460nm + 520nm): Improves fine lines, penetrates deep layers of the skin, and helps reduce flabby skin.
Image: A visual representation of the 7-wave red light for all skin types, detailing the benefits of each color.
7. Maintenance
- Cleaning: After each use, gently wipe the mask with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent damage.
- Charging: Ensure the device is fully charged before storing for extended periods to maintain battery health.
8. Troubleshooting
If you encounter any issues with your FOLOKE LED Light Therapy Mask, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not turning on | Low battery; loose connection. | Charge the device fully. Ensure all cables are securely connected. |
| Lights are dim or flickering | Low battery; incorrect brightness setting. | Recharge the device. Adjust the brightness level using the remote control. |
| Skin appears red or irritated after use | Skin sensitivity; excessive treatment time/intensity. | Reduce treatment time or intensity. If irritation persists, discontinue use and consult a dermatologist. |
| Remote control unresponsive | Low battery in remote; connection issue. | Ensure the main device is charged. Reconnect the remote control cable. |
If the problem persists after trying these solutions, please contact FOLOKE customer support for further assistance.
9. Specifications
- Product Dimensions: 14.01 x 9.83 x 1.97 inches
- Item Weight: 1.26 Pounds
- Model Number: MK66R-B
- Battery: 1 Lithium Polymer battery (included)
- Manufacturer: FOLOKE
- Red Light Wavelength: 630±5nm
- Near-Infrared Light Wavelength: 830nm
- Charging Time: Approximately 3-4 hours for full charge
- Session Duration: Preset to 10 minutes
- Brightness Levels: 5 adjustable levels
- Material: High-quality, flexible silicone
10. Warranty and Support
For warranty information, product support, or any inquiries not covered in this manual, please contact FOLOKE customer service directly. Refer to the product packaging or the official FOLOKE website for contact details.
