CANBUS Decoder Box with 16-Pin Harness

1. Introduction

This instruction manual provides detailed information for the installation and operation of the ZDTYKWPH CANBUS Decoder Box with a 16-Pin Harness. This product is designed to integrate an aftermarket Android multimedia stereo system with your vehicle's existing CANBUS system, ensuring proper communication and functionality of steering wheel controls, door status, and other vehicle data.

2. Compatibility

This CANBUS decoder box and 16-pin harness are compatible with the following Ford vehicle models when installing an Android multimedia stereo:

• Ford Focus: 2011-2019 (Note: Not suitable for 2014-2019 restyle models)
• Ford Fiesta
• Ford Edge: 2015-2018
• Ford Explorer: 2015-2018

The compatible CANBUS box models are RZ-10, RZ-FD10, and RZ-FD60.

3. Package Contents

Please verify that all components are present before beginning installation:

• 1x ZDTYKWPH CANBUS Decoder Box (Models RZ-10/RZ-FD10/RZ-FD60)
• 1x 16-Pin Wiring Harness

Figure 1: Complete CANBUS Decoder Box and 16-Pin Wiring Harness Kit.

Figure 2: The CANBUS Decoder Box, responsible for vehicle data interpretation.

Figure 3: Detailed view of the 16-pin harness connectors for vehicle and head unit integration.

4. Setup and Installation

Installation of the CANBUS decoder box and harness requires basic knowledge of car audio wiring. If you are unsure, professional installation is recommended.

1. Preparation: Disconnect the vehicle's battery before starting any electrical work to prevent short circuits or damage.
2. Remove Existing Head Unit: Carefully remove your vehicle's factory stereo or existing aftermarket head unit.
3. Connect CANBUS Box to Harness: Connect the CANBUS decoder box to the designated connector on the 16-pin wiring harness. Ensure a secure fit.
4. Connect Harness to Vehicle: Plug the vehicle-specific end of the 16-pin harness into your car's factory wiring connector. The harness is designed for a precise fit, ensuring reliable electrical connectivity.
5. Connect Harness to Android Head Unit: Connect the other end of the 16-pin harness to the corresponding port on your new Android multimedia stereo.
6. Secure Wiring: Route all wiring neatly and securely to prevent pinching or interference. The flexible design of the harness allows it to fit into tight spaces without bending excessively.
7. Test Functionality: Reconnect the vehicle battery. Power on the Android head unit and test all functions, including audio, steering wheel controls, and any other integrated features.
8. Final Assembly: Once all functions are verified, carefully reassemble the dashboard and secure the head unit in place.

5. Operating Instructions

Once installed, the CANBUS decoder box operates automatically, translating vehicle data for your Android multimedia stereo. Most functions, such as steering wheel controls, should work without additional configuration.

6. Maintenance

The CANBUS decoder box and harness are designed for long-term reliability and typically require no routine maintenance. Ensure all connections remain secure and free from moisture or physical damage. Periodically check for any loose wiring if issues arise.

7. Troubleshooting

Bluetooth Not Functioning

If Bluetooth connectivity is not working correctly with your Android head unit after installation, you may need to adjust the Bluetooth controller settings within the developer options of your head unit. Follow these steps:

1. Go to “Settings” on your Android head unit.
2. Navigate to “System”.
3. Select “Service Menu”.
4. Choose “For Developers”.
5. Click “OK”.
6. Select “MCU Settings”.
7. In this section, you will find options to select the Bluetooth controller. Common options include BC4, BC6, and BC8.
8. Select one controller option and then restart the device.
9. If the issue persists, try selecting a different controller version and restart the device again.

General Connectivity Issues

• Check Connections: Ensure all harness connections are fully seated and secure.
• Power Cycle: Disconnect and reconnect the vehicle battery to perform a full power cycle of the system.
• Verify Compatibility: Double-check that your vehicle model and year are listed as compatible.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.