Bear 2.5L Cool Mist Humidifier and Oil Diffuser

Introduction

Thank you for choosing the Bear 2.5L Cool Mist Humidifier and Oil Diffuser. This device is designed to improve your indoor air quality by adding moisture and can also function as an essential oil diffuser. Please read this manual thoroughly before use to ensure safe and optimal operation.

Important Safety Instructions

• Always place the humidifier on a firm, flat, waterproof surface at least 12 inches (30 cm) away from walls and appliances.
• Do not immerse the base in water or other liquids.
• Unplug the humidifier before filling, cleaning, or moving it.
• Do not add essential oils directly into the water tank. Use the designated aroma tray only.
• Keep out of reach of children and pets. The unit operates quietly (below 28dB) and is BPA-free, making it suitable for nurseries.
• Do not block the mist outlet.
• Use only clean, cool tap water. Distilled water is recommended to prevent mineral buildup.
• If the humidifier is damaged, do not operate it. Contact customer support.

Figure 1: The humidifier is designed for quiet operation and safety, suitable for environments with babies.

Figure 2: Never pour essential oils directly into the water tank. Always use the dedicated aroma tray.

Product Components

Familiarize yourself with the parts of your humidifier:

• Mist Outlet Nozzle (360° Rotatable)
• Water Tank (2.5L Capacity)
• Water Level Window (Max/Min indicators)
• Control Knob (Power ON/OFF, Mist Output Adjustment)
• Aroma Tray
• Base Unit
• Power Cord

Figure 3: Key components including the 360° rotating nozzle, water level window, and control knob.

Setup and First Use

1. Unpack: Carefully remove all packaging materials and place the humidifier on a flat, stable surface.
2. Clean: Before first use, clean the water tank and base unit as described in the "Maintenance" section.
3. Fill Water Tank: Remove the top cover. Fill the water tank directly from the top opening with clean, cool tap water. Do not exceed the 'Max' water level indicator. Distilled water is recommended to minimize mineral buildup.
4. Replace Cover: Place the top cover back onto the unit securely.
5. Plug In: Plug the power cord into a standard electrical outlet.

Figure 4: The top-fill design allows for easy and mess-free water refilling.

Operating Instructions

1. Power On: Turn the control knob clockwise to the 'ON' position. The indicator light will illuminate.
2. Adjust Mist Output: Continue turning the control knob clockwise to increase the mist output. Turn counter-clockwise to decrease it.
3. Adjust Mist Direction: Rotate the 360° mist outlet nozzle to direct the mist as desired.
4. Aroma Function: Pull out the aroma tray located on the side of the base unit. Add a few drops of your preferred essential oil onto the aroma pad. Slide the tray back into place. Do not add essential oils directly into the water tank.
5. Auto Shut-off: The humidifier will automatically turn off when the water level is too low. The 'NO WATER' indicator light will turn red.
6. Power Off: Turn the control knob counter-clockwise to the 'OFF' position to turn off the humidifier.

Figure 5: The aroma tray allows for the use of essential oils.

Maintenance and Cleaning

Regular cleaning is essential for optimal performance and hygiene.

1. Daily Maintenance:
   • Unplug the unit.
   • Empty any remaining water from the tank and base.
   • Rinse the tank and base with fresh water.
   • Wipe all surfaces dry with a clean cloth.
2. Weekly Cleaning (Descaling):
   • Unplug the unit.
   • Remove the top cover and empty the water tank.
   • Pour 1 cup (240ml) of undiluted white vinegar into the water tank and base.
   • Let it soak for 20-30 minutes.
   • Use a soft brush or cloth to clean mineral deposits from the tank and ultrasonic atomizer.
   • Rinse thoroughly with clean water until the vinegar smell is gone.
   • Wipe dry.
3. Aroma Tray Cleaning:
   • Remove the aroma tray and discard the used aroma pad.
   • Wipe the tray clean with a damp cloth.
   • Replace with a new aroma pad when using essential oils again.
4. Storage: When not in use for an extended period, clean the unit thoroughly, ensure all parts are dry, and store in a cool, dry place.

Figure 6: The wide opening and seamless base facilitate easy cleaning of the water tank.

Troubleshooting

Specifications

Warranty and Support

Bear products are manufactured to high-quality standards. For any questions, concerns, or issues regarding your humidifier, please contact Bear customer support. We are committed to providing satisfactory solutions.

Please refer to your purchase documentation or the official Bear website for specific warranty details and contact information.

Figure 7: Bear customer support is available to assist with any product inquiries.