ANJIELO SMART 530+V7022E Video Intercom System User Manual

1. Introduction

This manual provides essential instructions for the installation, operation, and maintenance of your ANJIELO SMART 530+V7022E Video Intercom System. This system is designed for multi-unit buildings, offering secure and convenient communication between visitors and residents. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Safety Information

• Ensure all power is disconnected before installation or maintenance to prevent electrical shock.
• Installation should be performed by qualified personnel or under professional supervision.
• Do not expose the outdoor unit to extreme physical impact or corrosive substances.
• Use only the specified power supply (DC 15V, 0.5A) for the outdoor unit.
• Keep the indoor monitor away from water and high humidity environments.
• Do not attempt to disassemble or repair the units yourself. Contact support for assistance.

3. Package Contents

Verify that all components are present in your package:

• Outdoor Camera Unit (1 unit)
• 7-inch LCD Indoor Monitors (Quantity varies by package, e.g., 12 units for this model)
• Power Adapters for Indoor Monitors
• Mounting Brackets and Screws
• Wiring Cables (specific to installation needs)
• RFID Key Fobs (if included in package)
• User Manual (this document)

Figure 3.1: Typical ANJIELO SMART Video Intercom System package contents.

4. Product Overview

4.1 Outdoor Camera Unit

• Camera Lens: AMOS, 700TVL resolution.
• Night Vision: Built-in infrared LEDs, visible within 1 meter, 0 LUX/F1.2 illumination.
• Case: Aluminum panels, waterproof (IP55 rated).
• Operating Temperature: -35°C to 50°C (-31°F to 122°F).
• Installation: Embedded installation.
• Features: Doorbell buttons (up to 12), RFID card reader for access control.

Figure 4.1: Outdoor Camera Unit with Night Vision capability.

Figure 4.2: Outdoor Camera Unit weather resistance features.

4.2 Indoor Monitor Unit

• Screen: 7-inch TFT LCD press key screen.
• Functions: Door answering, monitoring, unlock, two-way audio intercom.
• Ringtones: 52 selectable ringtones.
• Installation: Wall-mounted.
• Material: ABS engineering plastic.
• Connectivity: Wired (Wi-Fi for some features, but primary intercom is wired).

Figure 4.3: 7-inch Indoor Monitor Unit.

5. Setup and Installation

The ANJIELO SMART 530+V7022E system is designed for multi-unit buildings, allowing individual monitors to operate independently without interference.

Figure 5.1: System wiring diagram for multi-unit installation.

5.1 Outdoor Unit Installation

1. Location Selection: Choose a suitable location near the main entrance, ensuring clear visibility of visitors and protection from direct harsh weather if possible, despite its waterproof rating.
2. Mounting: The outdoor unit requires embedded installation. Cut an opening in the wall according to the unit's dimensions (265*128*48mm).
3. Wiring: Connect the power supply (DC 15V, 0.5A) and communication cables to the outdoor unit. Ensure all connections are secure and properly insulated.
4. Securing: Insert the outdoor unit into the prepared opening and secure it firmly using the provided screws.

5.2 Indoor Monitor Installation

1. Location Selection: Choose a convenient indoor location, typically near the main door of each apartment, at eye level.
2. Mounting: Attach the wall-mounting bracket to the wall using screws.
3. Wiring: Connect the communication cables from the outdoor unit and the power adapter to the indoor monitor.
4. Securing: Mount the indoor monitor onto the bracket, ensuring it is securely fastened.

5.3 Initial Power-Up and Testing

1. After all units are installed and wired, connect the power adapters to the indoor monitors and the main power supply to the outdoor unit.
2. Test the doorbell function by pressing a button on the outdoor unit. The corresponding indoor monitor should ring.
3. Verify two-way audio communication and video display on the indoor monitor.
4. Test the unlock function (if connected to an electronic lock).
5. If RFID key fobs are included, follow the instructions for programming them to the outdoor unit for access control.

6. Operation

6.1 Answering a Call

1. When a visitor presses the doorbell button on the outdoor unit, your indoor monitor will ring and display the visitor's image.
2. Press the "Answer" button (typically a phone icon) on the indoor monitor to establish two-way audio communication.
3. You can speak with the visitor and hear their response.

Figure 6.1: Visitor interaction and indoor monitor display.

6.2 Monitoring

You can manually view the outdoor camera feed at any time:

• Press the "Monitor" button (typically an eye icon) on the indoor monitor to view the live feed from the outdoor camera.
• This allows you to check the area outside your door without a visitor pressing the doorbell.

Figure 6.2: Night Infrared Monitoring capability.

6.3 Unlocking the Door

If your system is connected to an electronic door lock:

• During a call or while monitoring, press the "Unlock" button (typically a key icon) on the indoor monitor to remotely open the door.
• For RFID access, present a programmed key fob to the RFID reader on the outdoor unit to unlock the door.

6.4 Silent Mode

To avoid disturbance, especially during rest periods:

• Press the "Mute" or "Silent Mode" button (typically a bell with a slash through it) on the indoor monitor.
• The monitor will still display the visitor's image, but the ringtone will be silenced.

Figure 6.3: Silent Mode activation.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the outdoor unit and indoor monitor screens. Avoid abrasive cleaners or solvents.
• Lens Care: Keep the camera lens on the outdoor unit clean for optimal image quality.
• Cable Inspection: Periodically check all wiring for signs of wear or damage. Ensure connections remain secure.
• Software Updates: Check the manufacturer's website for any available firmware updates for your system model.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the ANJIELO SMART official website or contact your retailer. Keep your purchase receipt as proof of purchase for warranty claims.

Manufacturer: ANJIELO SMART

Date First Available: July 23, 2025

For further assistance, please visit the ANJIELO SMART Store on Amazon.