1. Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your ADORNEVE Twin Size Loft Bed. Please read all instructions carefully before assembly and use to ensure safe and proper operation.
Important Safety Information:
- Supervise children at all times while using the loft bed.
- Ensure the recommended mattress thickness of 4-6 inches is used to maintain safety.
- Do not allow children to climb on the guardrails or use the bed in ways other than intended.
- Always use the anti-tipping device provided to secure the bed to the wall.
2. Components List
Before beginning assembly, verify that all parts are present and undamaged. Refer to the included parts diagram for identification.
- Metal Bed Frame components
- Storage Stairs (individual steps and frame)
- 8 Fabric Drawers
- 2 Open Storage Shelves
- Wardrobe with Hanging Rod
- LED Light Strip and Controller (Remote/App)
- Power Outlet unit
- 13" H Safety Guardrails
- Anti-toppling Device
- Assembly Hardware (screws, bolts, etc.)
- Installation Manual and Tools
3. Assembly Instructions
Assembly requires two adults. Please follow the steps below carefully. It is recommended to assemble the bed in the room where it will be used.
- Unpack and Identify Parts: Lay out all components on a clean, soft surface to prevent scratches. Refer to the parts list and diagrams in the separate installation manual.
- Assemble the Main Bed Frame: Connect the metal frame sections according to the diagrams. Ensure all bolts are finger-tightened initially.
- Install Guardrails: Attach the 13-inch high safety guardrails to the top bunk frame.
- Assemble Storage Unit: Construct the storage unit frame, then insert the 8 fabric drawers and attach the 2 open shelves.
- Assemble Stairs and Wardrobe: Build the staircase structure, ensuring each step is securely fastened. Integrate the wardrobe section with the hanging rod.
- Attach Storage and Stair Units: Securely connect the assembled storage unit and stair unit to the main bed frame.
- Install Slats: Place the bed slats onto the frame. The embedded slat buckles ensure stability.
- Tighten All Connections: Once all major components are in place, systematically tighten all bolts and screws using the provided tools. Do not overtighten.
- Install Anti-Tipping Device: Secure the anti-tipping device to the bed frame and the wall as per the instructions to prevent accidental tipping.
- Install LED Lights: Attach the LED light strip under the bed frame using the adhesive buckles. Connect to the power outlet.
- Install Power Outlet: Secure the power outlet unit to the designated area on the bed frame.

Image 1: Fully assembled ADORNEVE Twin Size Loft Bed, showcasing the bed, storage stairs, drawers, and wardrobe. The under-bed space is visible, ready for customization.

Image 2: Diagram illustrating the overall dimensions of the loft bed, including length, width, height, and the height of the under-bed space (59.1 inches) and guardrails (13 inches).

Image 3: Close-up view of the integrated storage stairs, highlighting their wider, more stable steps and built-in storage compartments, designed for safer climbing and additional organization.

Image 4: Detailed view of the eight large fabric drawers and two open storage cubbies, demonstrating their capacity for organizing various items like books, clothes, and toys.

Image 5: Image showing the wardrobe section with a hanging rod and additional shelves, providing space for clothes, boxes, and other personal items.

Image 6: Illustration of the safety features, including the 13-inch high full-length guardrails on the top bunk and the anti-toppling device for securing the bed to the wall.

Image 7: Image demonstrating the large under-bed space (59.1" height x 63" width), suitable for a study desk, reading nook, or play area, maximizing room utility.
4. Operating Instructions
4.1 LED Mood Lighting
The integrated RGB LED lights offer over 60,000 color options and various modes, including music sync. Control the lights using the provided remote control or a compatible smartphone application.
- Remote Control: Point the remote at the LED receiver to change colors, adjust brightness, select modes (e.g., music mode, timing mode), and power on/off.
- Smartphone App: Download the recommended app (refer to the LED light manual for details). Pair your device via Bluetooth to access advanced controls, custom color settings, and music synchronization features.

Image 8: The RGB LED lighting system, showing the remote control and smartphone app interface for selecting from over 60,000 colors, music mode, mic mode, and timing mode.
4.2 Power Outlet
The built-in power outlet provides convenient access to electrical power for charging devices or powering small electronics. Ensure the bed is connected to a grounded wall outlet.
- Plug the bed's power cord into a standard wall outlet.
- Use the integrated outlets for your electronic devices.
- Do not overload the power outlet. Refer to the power outlet's specifications for maximum wattage.
5. Maintenance
- Cleaning: Wipe metal and wood surfaces with a soft, damp cloth. Avoid harsh chemicals. For fabric drawers, spot clean with mild detergent and air dry.
- Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Retighten as necessary to maintain stability and safety.
- LED Lights: If LED lights malfunction, check connections. If issues persist, consult the LED light manual or contact customer support.
- Power Outlet: Ensure the power cord is not pinched or damaged. If the outlet stops working, check the circuit breaker.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels wobbly | Loose hardware; Anti-tipping device not installed | Tighten all bolts and screws. Ensure anti-tipping device is securely fastened to the wall. |
| LED lights not working | Loose connection; Remote battery dead; App not paired | Check all power connections. Replace remote battery. Re-pair app via Bluetooth. |
| Power outlet not functioning | Not plugged in; Circuit breaker tripped; Faulty outlet | Ensure bed's power cord is plugged into a live outlet. Check household circuit breaker. If problem persists, contact an electrician. |
| Drawers do not slide smoothly | Obstruction; Misaligned fabric drawer | Remove any obstructions. Ensure fabric drawers are correctly inserted and shaped. |
7. Product Specifications
- Brand: ADORNEVE
- Model: B0FJDSJ3GV
- Size: Twin
- Product Dimensions: 93"L x 40.6"W x 72"H
- Material: Heavy-duty metal frame, wood print MDF, fabric drawers
- Color: Rustic Brown
- Weight Capacity: Up to 400 lbs
- Recommended Mattress Thickness: 4-6 inches
- Guardrail Height: 13 inches
- Under-Bed Space Dimensions: 59.1" height x 63" width
- Special Features: Storage stairs, 8 fabric drawers, 2 open shelves, wardrobe with hanging rod, LED lights (RGB, app/remote control), built-in power outlet, anti-toppling device.
8. Warranty and Support
For warranty information, please refer to the documentation included with your purchase or visit the official ADORNEVE website. If you encounter any issues or require assistance, please contact ADORNEVE customer support.
Contact Information: Refer to your purchase receipt or the ADORNEVE brand store for current contact details.
Online Resources: Visit the ADORNEVE Store on Amazon
9. Product Videos
9.1 ADORNEVE Kids Loft Bed with Stairs
Video 1: An overview of the ADORNEVE Kids Loft Bed, highlighting its features such as the LED mood lighting, built-in wardrobe, and smart staircase design for easy and secure climbing. This video demonstrates the bed's functionality and space-saving benefits.
9.2 ADORNEVE Stairway Twin Size Loft Bed with 8 Drawers
Video 2: A detailed look at the ADORNEVE Stairway Twin Size Loft Bed, focusing on the integrated storage solutions including the 8 drawers and open cubbies. It also showcases the spacious under-bed area and the overall sturdy construction.