1. Safety Information
Please read and understand this entire manual before attempting to assemble, operate, or install the product. Failure to do so could lead to electric shock, fire, or serious injury.
- Ensure the main power supply is disconnected before installation or maintenance.
- All electrical connections must be in accordance with local codes and ordinances, and the National Electric Code (NEC).
- Consult a qualified electrician if you are unfamiliar with electrical wiring.
- The fan must be mounted with a minimum of 7 feet (2.13 meters) clearance from the trailing edge of the blades to the floor.
- The mounting structure must be capable of supporting the weight of the fan (approximately 6.71 pounds).
- Do not operate the fan if any part is damaged.
- Do not insert objects into the path of the fan blades.
2. Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product.
- Fan Motor Assembly: The main body of the fan with integrated motor.
- Screw Bag: Contains various screws and anchors for mounting and assembly.
- Fan Blades (3 Pcs): Curved blades designed for efficient airflow.
- Lampshade: Diffuser for the LED light.
- Receiver: Component for remote and app control signals.
- Remote Control: Handheld device for operating fan and light functions. (2 AAA batteries included)
- Instruction Manual: This document.
- Ceiling Plate: Mounting bracket for securing the fan to the ceiling.
- Safety Hook: For temporary support during wiring.
3. Specifications
| Brand | Kviflon |
| Model Name | 8922 |
| Product Dimensions | 36"D x 36"W x 9.45"H |
| Number of Blades | 3 |
| Blade Length | 16 Inches |
| Motor Type | Brushless DC Motor |
| Number of Speeds | 6 |
| Noise Level | < 30 Decibels |
| Light Type | Integrated LED |
| Color Temperature | 3000K (Warm), 4500K (Natural), 6000K (Cool) |
| Dimmable | Yes (20% to 100%) |
| Control Method | Remote Control, Mobile App, Wall Switch (light on/off only) |
| Power Source | DC |
| Voltage | 110 Volts |
| Wattage | 24 watts |
| Item Weight | 6.71 pounds |
| Installation Type | Flush Mount |
| Indoor/Outdoor Usage | Indoor |
4. Installation
Follow these step-by-step instructions for proper installation. It is recommended to install the fan blades and light fixtures first, then install the fan to the ceiling.
4.1 Pre-Installation Steps
- Power Off: Ensure the main power supply to the installation area is turned off at the circuit breaker.
- Unpack: Carefully unpack all components and verify against the package contents list.
- Blade Screws: Note that the screws for the blades are pre-installed on the motor.
4.2 Assembling the Fan Body
- Attach LED Light Board: Secure the LED light board to the fan motor assembly using the provided screws.
Image: A person wearing white gloves uses a drill to screw the LED light board onto the black fan motor assembly. - Install Fan Blades: Attach each of the three fan blades to the motor assembly using the pre-installed screws. Ensure they are securely fastened.
Image: A person wearing white gloves attaches a black fan blade to the motor assembly, aligning it with the screw holes. - Connect Receiver: Connect the receiver unit to the fan's internal wiring. Ensure all connections are firm.
Image: A person wearing white gloves connects the wiring from the fan motor to the receiver unit. - Attach Lampshade: Secure the lampshade over the LED light board.
Image: A person wearing white gloves places the white lampshade onto the fan assembly, covering the LED light board.
4.3 Mounting to Ceiling
- Install Ceiling Plate: Mount the ceiling plate to the electrical junction box in your ceiling using appropriate screws and anchors. Ensure it is firmly secured.
Image: A person wearing white gloves uses a screwdriver to attach the black ceiling plate to the ceiling, showing the wiring connections. - Use Safety Hook: Hang the fan motor assembly onto the safety hook provided on the ceiling plate. This will temporarily support the fan while you make electrical connections.
Image: A person wearing white gloves hangs the fan motor assembly onto a safety hook extending from the ceiling plate, allowing hands-free wiring. - Electrical Wiring: Connect the household wiring to the fan's wiring according to the wiring diagram. Ensure correct connections for live, neutral, and ground wires.
Image: A detailed wiring diagram showing connections for black live wire, yellow ground wire, and white neutral wire to the fan's terminal block. - Secure Fan to Ceiling Plate: Once wiring is complete, carefully lift the fan and secure it to the ceiling plate with the remaining screws.
Video: This video demonstrates the step-by-step installation process for the Kviflon 8922 3-blade ceiling fan light, including attaching the mounting plate, connecting wires, and securing the fan to the ceiling.
5. Operation
Your Kviflon ceiling fan can be controlled via the included remote control or a dedicated mobile application.
5.1 Remote Control Functions
The remote control allows full functionality of your ceiling fan and light.
- All On/Off: Powers the entire unit on or off.
- Light On/Off: Toggles the LED light.
- Fan Speed (1-6): Adjusts fan speed from low (1) to high (6).
- Fan Off: Turns off the fan motor.
- Color Temperature: Cycles through 3000K (Warm), 4500K (Natural), and 6000K (Cool).
- Brightness +/-: Adjusts light brightness from 20% to 100%.
- Night Light: Activates a low-brightness setting.
- Forward/Reverse (F/R): Changes fan blade direction for summer (downward airflow) or winter (upward airflow) modes. Press the F/R key and wait 5-8 seconds for the fan to stop and reverse.
- Timer (2H): Sets the fan to turn off automatically after 2 hours.
- Code Matching: Used for pairing the remote with the fan.
5.2 Mobile App Control
The "Fan Lamp Pro" app provides convenient control over all fan and light features from your smartphone.
- Download App: Scan the QR code in the manual or visit www.jasonghost.com/fanlamppro/ to download "Fan Lamp Pro".
- Enable Bluetooth: Turn on Bluetooth on your smartphone.
- Pair Device: Open the "Fan Lamp Pro" app. Turn off the main power to the fan, then turn it back on. Within 5 seconds of powering on, click the pair button several times in the app. The fan light will blink twice or beep to indicate a successful connection.
Image: A sequence of smartphone screens illustrating the process of downloading the "Fan Lamp Pro" app, enabling Bluetooth, adding a new device, and pairing the fan by clicking the pair button within 5 seconds of power-on. Video: This video demonstrates the APP control method for the Kviflon 36-inch 3-blade ceiling fan, showing how to connect the fan to the app and control its various functions like fan speed, light settings, and reverse function.
5.3 Wall Control (Light On/Off Only)
The fan is compatible with conventional wall switches for basic light on/off functionality. It is NOT compatible with dimmer switches or fan gear switches.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your ceiling fan.
- Cleaning: Use a soft brush or lint-free cloth to prevent scratching the finish. Do not use water or harsh detergents.
- Blade Cleaning: Wipe the blades with a soft, damp cloth.
- Tighten Screws: Periodically check all screws for tightness. Due to natural movement, some connections may become loose over time.
- No Lubrication: The motor has permanently lubricated bearings and does not require oiling.
7. Troubleshooting
If you experience issues with your fan, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan; Loose wire connections; Remote control not paired. | Check circuit breaker; Ensure all wires are securely connected; Pair the remote control or app with the fan. |
| Fan is noisy | Loose fan blades; Loose mounting screws; Motor issues. | Tighten all blade screws; Ensure mounting screws are secure; Contact customer support if motor noise persists. |
| Light does not work | Loose wire connection to light; LED board malfunction. | Check light wiring connections; Contact customer support for LED board replacement. |
| Remote control not working | Dead batteries; Remote not paired; Interference. | Replace batteries (2 AAA); Re-pair the remote with the fan; Ensure no obstructions between remote and fan. |
| App control not working | Bluetooth off; App not paired; App version outdated. | Ensure Bluetooth is enabled; Re-pair the app with the fan; Check for app updates. |
8. Warranty and Support
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the Kviflon official website.
Kviflon Store: Visit the Kviflon Store on Amazon