Hlivelood 78" Farmhouse Dining Table for 5 6 8

Hlivelood 78 Inch Dining Table User Manual

Model: 78" Farmhouse Dining Table for 5 6 8

Introduction

Thank you for choosing the Hlivelood 78 Inch Dining Table. This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your new dining table. Please read this manual thoroughly before assembly and use to ensure proper setup and longevity of your product.

Hlivelood 78 Inch Dining Table in a dining room setting

Image: The Hlivelood 78 Inch Dining Table, showcasing its classic farmhouse design with a brown and black tabletop and X-shaped wooden legs, set in a spacious dining room.

Safety Information

Please observe the following safety precautions to prevent injury and damage to the product:

  • Always assemble the table on a soft, clean surface to prevent scratches.
  • Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten as necessary.
  • Do not exceed the maximum load-bearing capacity of 330 pounds.
  • Keep small parts and packaging materials away from children.
  • Avoid standing or climbing on the table.
  • Use caution when moving the table to prevent damage or injury.

Package Contents

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

  • Tabletop sections (Thickened Brown and Black Desktop)
  • X-shaped wooden legs (2.4in Thickened Wooden Legs)
  • Metal support column (2in Thickened Metal Support)
  • Adjustable feet (6 Adjustable Feet)
  • Assembly hardware (screws, bolts, washers)
  • Installation Tool
  • Assembly Instructions

Setup (Assembly Instructions)

Assembly is straightforward and can typically be completed by one person. For best results, follow these steps carefully. Assembly videos are also available to assist with the process.

  1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Refer to the parts list to identify each component.
  2. Attach Adjustable Feet: Screw the 6 adjustable feet into the designated holes on the bottom of the X-shaped wooden legs. Do not overtighten.
  3. Assemble Leg Bases: Connect the X-shaped wooden legs using the provided crossbar and hardware. Ensure all connections are firm but do not fully tighten yet.
  4. Install Metal Support: Secure the 2-inch thickened metal support column between the assembled leg bases. This central support enhances stability.
  5. Attach Tabletop: Carefully place the tabletop sections onto the assembled leg structure. Align the pre-drilled holes on the tabletop with the holes on the leg bases and metal support. Secure the tabletop using the provided screws.
  6. Final Tightening: Once all components are in place and aligned, systematically tighten all screws and bolts using the installation tool. Ensure the table is stable and level.
Close-up of table components including thickened desktop, strong wooden feet, and adjustable feet

Image: Detailed view of the table's construction, highlighting the 1.6-inch thick desktop, K-shaped wooden feet for stability, and the 6 adjustable feet for leveling on uneven surfaces.

Operating (Usage)

Your Hlivelood dining table is designed for versatile use and can accommodate various needs:

  • Dining Table: With its spacious 78.7 x 39.4 inch tabletop, this table comfortably seats 4 to 8 people, making it ideal for family meals and gatherings.
  • Kitchen Table: Its durable construction and easy-to-clean surface make it suitable for kitchen environments.
  • Study Desk / Computer Desk: The ample surface area provides plenty of space for work, study, or computer use.
  • Conference Table: Its large size and sturdy design also make it suitable for small office meetings.

Adjusting for Uneven Floors: The table is equipped with adjustable feet. If the table wobbles, gently turn the adjustable feet at the bottom of the legs until the table is stable and level on your floor surface.

Icons depicting various uses of the dining table: as a desk, for dining, for studying, and for breakfast.

Image: Visual representation of the table's versatility, illustrating its use as a dining table, study desk, computer desk, or conference table.

Maintenance

Proper care and maintenance will help preserve the beauty and extend the lifespan of your dining table:

  • Cleaning: The tabletop features heat-resistant, waterproof, scratch-resistant, and easy-to-clean properties. Wipe spills immediately with a soft, damp cloth. For general cleaning, use a mild soap solution and dry thoroughly. Avoid harsh chemicals or abrasive cleaners.
  • Protection: While the tabletop is scratch-resistant, using placemats or coasters for hot dishes and sharp objects is recommended to further protect the surface.
  • Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary to maintain stability.
  • Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or damage to the wood finish.
Icons representing waterproof, scratch-resistant, and easy-to-clean features of the table.

Image: Visual indicators of the table's key maintenance-friendly features: waterproof, scratch-resistant, and easy to clean.

Troubleshooting

If you encounter any issues with your dining table, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Table wobbles or is unstable.Uneven floor surface; loose hardware.Adjust the leveling feet at the bottom of the legs until stable. Check and tighten all assembly hardware.
Parts do not align during assembly.Incorrect orientation of parts; hardware not fully loosened.Review the assembly instructions and diagrams carefully. Loosen all hardware slightly, adjust alignment, then re-tighten.
Scratches or marks on tabletop.Sharp objects; abrasive cleaning.While scratch-resistant, avoid dragging sharp objects. Use soft cloths for cleaning. Minor marks may be buffed with appropriate wood polish.

Specifications

Detailed specifications for the Hlivelood 78 Inch Dining Table:

Diagram showing the dimensions of the 78.7 x 39.4 x 29.9 inch dining table and seating capacity layouts.

Image: Technical diagram illustrating the overall dimensions (78.7"L x 39.4"W x 29.9"H) and load capacity (300 lbs) of the dining table, along with seating arrangements for 6-8 people.

FeatureDetail
BrandHlivelood
Model Name78" Farmhouse Dining Table for 5 6 8 People
Product Dimensions78.7"D x 39.4"W x 29.9"H
ColorBrown
StyleModern Farmhouse
Base TypeLeg (X-shaped)
Material TypeWood (MDF boards) and Metal
Item Weight90 Pounds
Load-Bearing CapacityUp to 330 Pounds
Assembly RequiredYes (Recommended 1 person for assembly)
Special FeaturesHeat-resistant, Waterproof, Scratch-resistant, Easy-to-clean tabletop, Adjustable feet, Metal protective pieces on corners.

Warranty & Support

For any questions, concerns, or assistance with your Hlivelood dining table, please contact our customer support. While specific warranty details are not provided in this manual, we are committed to ensuring your satisfaction.

Please refer to your purchase documentation or the retailer's website for specific warranty terms and conditions. For direct support, you may visit the Hlivelood Store on Amazon or contact customer service through your purchase platform.

© 2025 Hlivelood. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.