Introduction
This manual provides essential instructions for the assembly, operation, and maintenance of your Generic Criss Cross Leg Armless Swivel Office Chair. Please read this guide thoroughly before use to ensure proper function and longevity of your product.
Image: The Criss Cross Leg Armless Swivel Office Chair, grey in color, featuring a wide seat and a five-star base with wheels, positioned in a modern room.
Safety Information
- Ensure all components are securely fastened before use.
- Do not exceed the maximum weight capacity of 300 lbs (136 kg).
- Keep hands and feet clear of moving parts during adjustment.
- Use on a level surface to prevent tipping.
- Keep away from open flames and excessive heat.
Package Contents
Please verify that all parts are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Seat Cushion with Backrest (1)
- Gas Lift Cylinder (1)
- Base (1)
- Wheels (5)
- Assembly Hardware (Screws, Allen Wrench)
Setup and Assembly
Follow these steps to assemble your chair:
- Attach Wheels to Base: Insert each of the five wheels into the openings at the end of each leg of the chair base. Push firmly until they click into place.
- Insert Gas Lift: Place the gas lift cylinder into the center hole of the assembled base. Ensure it is seated firmly.
- Attach Seat to Gas Lift: Carefully align the center mechanism under the seat cushion with the top of the gas lift cylinder. Lower the seat onto the gas lift, applying gentle pressure until it is securely connected.
- Secure Seat Mechanism: If applicable, use the provided screws and Allen wrench to secure the seat mechanism to the bottom of the seat cushion. Refer to the diagram for screw placement.
Image: Visual guide illustrating the seat height adjustment handle, the knob for rocking mode, the metal structure of the base, and the option to change wheels to fixed chair legs.
Operating Instructions
- Height Adjustment: To adjust the seat height, pull the lever located under the right side of the seat upwards. While holding the lever, stand up to raise the seat or sit down to lower it. Release the lever to lock the height.
- Swivel Function: The chair seat can rotate 360 degrees for easy movement and access.
- Rocking Mode: To activate the rocking function, locate the knob under the seat cushion and turn it. The seat can swing back up to 22 degrees. Adjust the tension of the rocking mechanism by turning the knob clockwise to increase tension or counter-clockwise to decrease it.
Image: A person comfortably seated in the chair, demonstrating the 360-degree rotating and the 108-130 degree recline for work or relaxation, highlighting the thick padded design.
Maintenance
- Cleaning: Wipe the PU leather upholstery with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. For spills, blot immediately with a clean, dry cloth.
- Inspection: Periodically check all screws and bolts to ensure they are tight. Re-tighten if necessary.
- Wheel Care: Clean wheels regularly to remove dust and debris that may hinder smooth movement.
Image: Detailed view of the chair's construction, emphasizing the high-quality faux leather, skin-friendly material, and super-soft cushion for comfort and durability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not adjust height. | Gas lift cylinder not properly installed or damaged. | Ensure gas lift is fully inserted into the base and seat mechanism. If issue persists, contact support. |
| Chair wobbles. | Loose screws or uneven surface. | Check and tighten all assembly screws. Ensure the chair is on a flat, level surface. |
| Wheels do not roll smoothly. | Debris in wheels or damaged wheels. | Clean wheels to remove hair or debris. If damaged, contact support for replacements. |
Specifications
Image: Diagram illustrating the overall product dimensions, including seat width, seat depth, and adjustable height range, along with the 300 lbs weight capacity.
- Model: ZHUMI-C-7295L-KK
- Brand: Generic
- Color: Grey
- Material: PU Leather, Metal
- Overall Dimensions (D x W x H): 26.2" x 26.8" x 33.1"-36.8"
- Seat Width: 26.4"
- Weight Capacity: 300 lbs (136 kg)
- Product Weight: 28.7 lbs (13 kg)
- Swivel: 360 degrees
- Rocking Angle: Up to 22 degrees
Warranty Information
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation included with your purchase or contact the manufacturer directly.
Customer Support
For assistance with assembly, missing parts, or any other inquiries, please contact your retailer or the manufacturer's customer service department. Have your model number (ZHUMI-C-7295L-KK) and proof of purchase ready when contacting support.
Manufacturer: Yapamar
