NJSBYL Auto Idle Start Stop Disable Module Instruction Manual

Introduction

The NJSBYL Auto Idle Start Stop Disable module is designed to provide a permanent solution for deactivating the automatic engine start-stop feature in compatible Honda vehicles. This device ensures that your vehicle's engine does not automatically shut off and restart at traffic lights or stop signs, thereby reducing wear on the engine and battery. This manual provides comprehensive instructions for installation and operation.

Image: The NJSBYL Auto Idle Start Stop Disable module shown with a red Honda Ridgeline, illustrating the product and its intended vehicle.

Setup and Installation

This module features a plug-and-play design, requiring no error codes, wire splicing, or programming. A disassembly tool is included to assist with the installation process.

Installation Steps:

1. Remove Shifter Panel: Carefully remove the vehicle's shifter panel to access the underlying wiring.
2. Unplug Auto Idle Stop Button Connector: Locate and unplug the connector for the auto idle stop button.
3. Insert Eliminator: Insert the NJSBYL module between the auto idle stop button connector and the vehicle's harness. Ensure a secure connection.
4. Complete Installation: Reassemble the shifter panel. The installation is now complete.

Image: A visual guide demonstrating the four steps for installing the auto idle stop eliminator, including removing the shifter panel, unplugging the connector, inserting the module, and reassembly.

No additional power wiring is required, preserving the original car's power system. The module also preserves factory remote start functionality.

Operating Instructions

Once installed, the NJSBYL module will automatically disable the idle start-stop system. It features a memory function, meaning you do not need to manually turn off the idle stop system every time you start your vehicle.

• Automatic Deactivation: After installation, the eliminator will turn off the auto start-stop feature within approximately 10 seconds of starting the car.
• Manual Reactivation (Optional): To occasionally use the auto start-stop feature, simply press the ASS/ESS/A-off button once.
• Important Note: If you turn the car on and off within 30 seconds, the eliminator may not take effect. In such cases, wait approximately 30 seconds before restarting the car for the module to function correctly.

Image: Visual representation of scenarios where the engine will remain on, including stop signals, red lights, temporary parking, and inclines, demonstrating the module's effect.

The module ensures that functions such as the hood open alarm and normal remote startup operate without interference.

Maintenance

The NJSBYL Auto Idle Start Stop Disable module is designed for long-term, maintenance-free operation. No regular maintenance or adjustments are required after proper installation.

Troubleshooting

• Module Does Not Seem to Work:
  • Ensure all connections are secure and fully seated. Recheck the plug-and-play connections between the button, module, and harness.
  • Verify that the vehicle is compatible with the module (2024-2025 Honda Ridgeline/Passport).
  • If the car was turned on and off quickly (within 30 seconds), the module might not have initialized. Turn off the vehicle, wait for at least 30 seconds, and then restart.
• Dashboard Warning Lights:
  • The module is designed to be error-free. If warning lights appear, double-check the installation steps. If the issue persists, disconnect the module and consult professional assistance.

Specifications

Image: The NJSBYL module displaying its physical dimensions, specifically a length of 5.98 inches (152mm).

Warranty

Specific warranty details are not provided. However, the product is designed for high temperature resistance and long service life. For any concerns regarding product defects or performance, please refer to the manufacturer's customer service.

Support

NJSBYL offers professional guidance and reliable customer service to address any issues encountered during use or installation. Please contact the manufacturer's support channels for assistance.