1. Introduction
This manual provides comprehensive instructions for the RETROSUN Replacement Remote Control, designed specifically for Tempur-Pedic Ergo Adjustable Bed Bases. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your remote control.
Important Note: Please ensure that the appearance and color of your original remote control are exactly the same as the pictures provided in this manual before attempting to use this replacement. This remote control is compatible only with Tempur-Pedic Ergo bases and will not work with other adjustable bed bases.
Figure 1.1: Front and back view of the RETROSUN replacement remote control.
Figure 1.2: The RETROSUN remote control is designed for Tempur-Pedic Ergo Adjustable Bed Bases. Please verify your original remote matches this design for compatibility.
2. Setup
2.1 Battery Installation
The remote control requires two 1.5V AAA batteries (not included). To install the batteries:
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards to open.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Figure 2.1: Battery installation diagram. Ensure correct polarity when inserting batteries.
2.2 Pairing Instructions
Before using the remote control, it must be paired with your Tempur-Pedic Ergo Adjustable Bed Base. Follow these steps carefully:
- Step 1: Ensure your bed base remote has fresh batteries installed.
- Step 2: Locate the Battery Backup Box on your bed base. Press the [POWER DOWN] button on the Battery Backup Box twice. A light on the Battery Backup Box will illuminate.
- Step 3: On the back of the new remote, press and hold down the PAIR button. The PAIR button will illuminate blue and start flashing. Continue holding until the PAIR button stops flashing and the illuminated light on the Battery Backup Box goes out.
- Step 4: Release the PAIR button and test all remote functions to confirm successful pairing.
Note: If the remote does not sync after following these steps, check the remote's batteries and repeat the pairing process.
Figure 2.2: Pairing process diagram. Follow the steps to connect your remote to the bed base.
3. Operating Instructions
The remote control features an intuitive layout for easy operation of your adjustable bed base. Below is a detailed description of each button's function:
Figure 3.1: Remote Control Features and Button Layout.
| No. | Button Name | Function |
|---|---|---|
| 1 | Child Lock | Activates/deactivates child lock to prevent accidental adjustments. |
| 2 | Bed Lamp | Turns the integrated bed lamp on or off. |
| 3 | Anti-Snore | Adjusts the bed to a position designed to reduce snoring. |
| 4 | Lumbar Up | Increases lumbar support. |
| 5 | TV Position | Moves the bed to a preset position ideal for watching TV. |
| 6 | M1 Position | Recalls the first custom memory position. |
| 7 | Lumbar Down | Decreases lumbar support. |
| 8 | M2 Position | Recalls the second custom memory position. |
| 9 | Head Up | Raises the head section of the bed. |
| 10 | Foot Up | Raises the foot section of the bed. |
| 11 | Zero Position | Moves the bed to the Zero Gravity position. |
| 12 | Head Down | Lowers the head section of the bed. |
| 13 | Foot Down | Lowers the foot section of the bed. |
| 14 | Head Massage | Activates/adjusts massage function for the head section. |
| 15 | Massage | Activates/adjusts overall massage function. |
| 16 | Foot Massage | Activates/adjusts massage function for the foot section. |
| 17 | Flat | Returns the bed to a completely flat position. |
The remote control is engineered with a new-gen smart chip, providing instant button response and a reliable operational range of up to 8 meters (26 feet). Its 120-degree wide-angle design minimizes positioning constraints, allowing for comfortable use from various angles.
Figure 3.2: The remote control offers an operational distance of up to 8 meters.
4. Maintenance
4.1 Cleaning
To maintain the remote control's appearance and functionality:
- Wipe the surface with a soft, dry cloth.
- For stubborn dirt, lightly dampen the cloth with water; avoid harsh chemicals or abrasive cleaners.
- Do not immerse the remote control in water or any other liquid.
4.2 Battery Replacement
Replace batteries when the remote's response becomes sluggish or if the indicator light (if present) signals low power. Refer to Section 2.1 for battery installation instructions.
5. Troubleshooting
If you experience issues with your remote control, try the following troubleshooting steps:
- Remote not responding: Check if the batteries are correctly installed and have sufficient charge. Replace batteries if necessary.
- Remote not controlling the bed: Ensure the remote is properly paired with the bed base. Refer to Section 2.2, "Pairing Instructions," and repeat the process.
- Intermittent control: Ensure there are no obstructions between the remote and the bed base. Verify you are within the operational range (up to 8 meters).
- Buttons not working: Inspect buttons for any physical damage or debris. Clean the remote as described in Section 4.1.
If problems persist after following these steps, contact customer support for further assistance.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | BW488 |
| Compatible Part Number | Keeson RF396C jldk.111.17.01 |
| Package Dimensions | 7.28 x 2.09 x 0.87 inches |
| Item Weight | 2.82 ounces |
| Power Source | 2 x 1.5V AAA Batteries (not included) |
| Connectivity Technology | Infrared |
| Max Number of Supported Devices | 1 (Adjustable Bed) |
| Material | High-quality ABS |
| Operational Range | Up to 8 meters (26 feet) |
7. Warranty and Support
This product is manufactured by Oumeite under the RETROSUN brand. For specific warranty information or technical support, please refer to the product packaging or contact the seller directly. Details regarding warranty coverage and support channels are typically provided at the point of purchase or on the seller's official website.