1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your SW-Motech PRO Tank Ring. Please read this manual thoroughly before installation and use to ensure proper function and safety. This tank ring is designed to provide a secure and convenient mounting point for compatible tank bags on motorcycles with a 6-screw tank ring system, specifically Triumph models.
2. Product Overview
The SW-Motech PRO Tank Ring is a high-quality accessory crafted from alloy steel and aluminum, designed for robust and reliable attachment of tank bags. Its black finish integrates seamlessly with most motorcycle aesthetics. The package includes the PRO tank ring itself and the necessary 6 screws for mounting.
Figure 1: SW-Motech PRO Tank Ring. This image shows the black, U-shaped tank ring with six visible screw holes for attachment to the motorcycle tank.
2.1 Components Included
- 1 x PRO Tank Ring (Black)
- 6 x Mounting Screws
3. Setup and Installation
Installation of the PRO Tank Ring requires basic mechanical aptitude and common tools. Ensure your motorcycle is stable and turned off before beginning the installation process.
3.1 Tools Required (Not Included)
- Appropriate screwdriver or hex key for tank ring screws
- Torque wrench (recommended for precise tightening)
3.2 Installation Steps
- Prepare the Tank: Locate the existing screw holes on your motorcycle's fuel tank where the tank ring will be mounted. Ensure the area is clean and free of debris.
- Position the Tank Ring: Carefully align the SW-Motech PRO Tank Ring with the screw holes on your motorcycle's tank. The ring should sit flush against the tank surface.
- Insert Screws: Insert the provided 6 mounting screws into the corresponding holes on the tank ring and through to the tank.
- Hand-Tighten: Hand-tighten all screws initially to ensure proper alignment and to prevent cross-threading.
- Final Tightening: Using the appropriate tool, tighten the screws in a star pattern (opposite screws) to ensure even pressure. Refer to your motorcycle's service manual for specific torque specifications for tank-mounted accessories, if available. Do not overtighten.
- Verify Security: Gently attempt to move the installed tank ring to confirm it is securely fastened and does not wobble.
4. Operating Instructions
The PRO Tank Ring serves as the base for attaching compatible SW-Motech PRO series tank bags. The tank bag typically features a quick-release mechanism that locks onto this ring.
4.1 Attaching a Tank Bag
- Align the base of your PRO tank bag with the PRO Tank Ring.
- Press the tank bag down firmly until you hear an audible "click," indicating it is securely locked onto the ring.
- Gently pull upwards on the tank bag to confirm it is properly engaged and cannot be easily removed.
4.2 Detaching a Tank Bag
- Locate the release mechanism on your PRO tank bag (usually a pull strap or lever).
- Activate the release mechanism while simultaneously lifting the tank bag upwards.
- The tank bag should detach smoothly from the PRO Tank Ring.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your PRO Tank Ring.
- Cleaning: Clean the tank ring periodically with a soft cloth and mild soap solution. Avoid abrasive cleaners or solvents that could damage the finish.
- Screw Check: Periodically inspect all 6 mounting screws to ensure they remain tight. Vibrations from riding can sometimes loosen fasteners over time. Re-tighten if necessary, adhering to recommended torque specifications.
- Mechanism Check: If using with a tank bag, ensure the quick-release mechanism on the tank bag engages and disengages smoothly with the tank ring. Keep the contact surfaces clean.
6. Troubleshooting
If you encounter issues with your PRO Tank Ring, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Tank ring feels loose after installation. | Screws are not tightened sufficiently or evenly. | Re-tighten all 6 screws in a star pattern, ensuring even pressure. Use a torque wrench if available. |
| Tank bag does not attach securely. | Misalignment between tank bag and ring; debris on contact surfaces; issue with tank bag mechanism. | Ensure proper alignment. Clean the tank ring and the tank bag's base. Inspect the tank bag's locking mechanism for damage. |
| Missing components (e.g., screws). | Packaging error or loss during handling. | Contact SW-Motech customer support immediately for replacement parts. |
7. Specifications
- Model: PRO Tank Ring Black. Tank With 6 Screws.
- Part Number: TRT.00.787.16100/B
- Brand: SW-Motech
- Color: Black
- Material: Alloy Steel, Aluminum
- Mounting Type: U-screw (6-screw system)
- Item Weight: Approximately 0.4 Pounds (6.4 ounces)
- Dimensions (Package): Approximately 7.24 x 5.35 x 2.13 inches
- Vehicle Service Type: Motorcycle
- Automotive Fit Type: Universal Fit (for 6-screw Triumph tanks)
8. Warranty and Support
For information regarding warranty coverage, technical support, or replacement parts, please contact SW-Motech directly through their official website or authorized distributors. Always refer to your purchase documentation for specific warranty terms applicable to your region.
SW-Motech Contact Information:
- Website: https://sw-motech.us/ (or your regional SW-Motech website)
- Refer to the product packaging or SW-Motech website for specific customer service contact details.