JaeJaes Smart Motorized Blackout Roller Shades (Model V0005)

1. Introduction

Thank you for choosing JaeJaes Smart Motorized Blackout Roller Shades. This manual provides essential information for the safe installation, operation, and maintenance of your new shades. Please read it thoroughly before installation and keep it for future reference.

2. Safety Information

• Ensure all installation hardware is securely fastened to prevent the shades from falling.
• Keep children and pets away from the shades during operation to prevent entanglement or injury.
• Do not attempt to disassemble or repair the motor or internal components. Contact customer support for assistance.
• Use only the provided charging cable or a compatible solar panel (sold separately) for charging.
• Avoid exposing the shades to extreme temperatures or moisture.

3. Package Contents

Verify that all items are present in your package:

• Motorized Blind x 1
• Remote Control x 1
• 3M Charging Cable x 1
• Product Manual x 1 (This document)
• Reference Slip for Installation Position x 1
• Installation Accessories (screws, anchors, brackets)

Image: All components included in the JaeJaes Smart Motorized Blackout Roller Shades package.

4. Specifications

5. Setup & Installation

5.1. Measuring Your Window

Accurate measurements are crucial for a proper fit. Refer to the video below for detailed measuring instructions.

Inside Mount:

• Window Depth: Must be ≥ 2.6 inches (6.6 cm).
• Width: Measure the window width at the top, middle, and bottom of the inner frame. Take the minimum of these three measurements and subtract 1/4 inch (0.64 cm) for the final order width.
• Height: Measure the window height at the left, center, and right vertical positions of the inner frame. Take the maximum of these three measurements. The maximum height should be ≤ 72 inches (182.88 cm).

Outside Mount:

• Width: Measure the window width at the top, middle, and bottom of the outer frame. Take the maximum of these three measurements and add 4 inches (10.16 cm) for the final order width.
• Height: Measure the window height at the left, center, and right vertical positions of the outer frame. Take the maximum of these three measurements. The maximum height should be ≤ 68 inches (172.72 cm).

Image: Detailed measuring instructions for both inside and outside window mounts.

5.2. Recommended Installation Tools

• Power Drill (with 15/64" or 6mm drill bit)
• Screwdriver
• Ladder (if necessary for high windows)

Image: Essential tools for installing your motorized roller shades.

5.3. Installation Steps

1. Step 1: Paste the Positioning Strip. Use the provided reference slip to mark the drilling locations for either inside or outside mount. Ensure it is level.
   

   Image: Applying the positioning strip to guide drill holes for installation.

2. Step 2: Drill Holes. Using the marked positions from the strip, drill holes into the wall or window frame.
   

   Image: Drilling pilot holes for the mounting brackets.

3. Step 3: Screw in the Screws. Insert wall anchors (if needed) and then screw the mounting brackets into place.
   

   Image: Attaching the mounting brackets to the wall using screws.
4. Step 4: Hang the Roller Blind. Carefully align the roller blind with the installed brackets and snap it into place. Ensure it is securely seated.
   

   Image: Hanging the roller blind onto the pre-installed mounting brackets.

6. Operating Instructions

6.1. Remote Control Operation

Your JaeJaes Smart Roller Shades come with a dedicated remote control for easy operation. The remote allows you to raise, lower, and stop the shades, as well as set favorite positions.

• Up Arrow: Raises the shade.
• Down Arrow: Lowers the shade.
• Pause Button: Stops the shade at its current position.
• Channel Buttons (if applicable): Select which shade to control if you have multiple units paired to one remote.
• Setting Button: Used for pairing and setting limits (refer to the remote's specific instructions for advanced settings).

Image: The remote control for operating your JaeJaes motorized shades.

6.2. Smart Control with Alexa

Your smart roller shades can be controlled hands-free using Alexa. No gateway is required for direct connection with select Echo devices that have a built-in Zigbee chip.

Compatible Echo Devices (with built-in Zigbee chip):

• Echo (4th Gen)
• Echo Plus
• Echo Show 10 (all models except 1st Gen)
• Echo Studio

For other Echo devices without a built-in Zigbee chip, a separate Smart Hub (sold separately) is required to bridge the connection.

Image: A user interacting with Alexa to control the smart roller shades.

Pairing with Alexa:

1. Ensure your Echo device is set up and connected to your Wi-Fi network.
2. Open the Alexa app on your smartphone or tablet.
3. Go to 'Devices' and tap the '+' icon to add a new device.
4. Select 'Shade' or 'Blinds' from the list of device types.
5. Follow the on-screen instructions to discover and pair your JaeJaes shades. This may involve pressing a button on the shade motor (refer to the motor's specific instructions for pairing mode).

Voice Commands:

Once paired, you can use commands such as:

• "Alexa, open [Shade Name]"
• "Alexa, close [Shade Name]"
• "Alexa, set [Shade Name] to 50%"

Alexa App Control & Scheduling:

The Alexa app allows you to control your shades remotely and set schedules:

• Open the Alexa app and navigate to your shades under 'Devices'.
• Use the slider to adjust the shade position.
• Create routines to automatically open or close your shades at specific times (e.g., open at sunrise, close at sunset).

7. Maintenance

7.1. Cleaning

• Dust the shades regularly with a soft cloth or a vacuum cleaner with a brush attachment.
• For spot cleaning, use a damp cloth with mild soap and water. Gently blot the affected area and allow it to air dry completely. Do not rub vigorously.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the fabric or motor components.

7.2. Charging

The shades are equipped with a 2200mAh battery, providing 3-6 months of use on a single charge. The motor unit has a USB-C charging port.

• Connect the provided 3M USB-C charging cable to the charging port on the motor.
• Plug the other end into a standard USB power adapter (not included) or a compatible solar panel (sold separately).
• A red indicator light typically signifies charging, turning green when fully charged.

Image: Details on the 2200mAh battery and charging options, including USB-C and solar charging.

8. Troubleshooting

9. Warranty & Support

JaeJaes products are designed for quality and reliability. For specific warranty details, please refer to the warranty card included with your purchase or visit the official JaeJaes website. If you encounter any issues or require technical assistance, please contact JaeJaes customer support through the retailer's platform or the contact information provided on our website.

JaeJaes Customer Service: Visit the JaeJaes Store on Amazon