Generic Dishwasher Heating Element Replacement Instruction Manual

1. Introduction and Overview

This document provides comprehensive instructions for the installation and maintenance of your new Generic Dishwasher Heating Element. This replacement part is designed to restore proper heating and drying functionality to compatible Kenmore dishwashers. It is specifically intended for dishwashers equipped with stainless steel or metal tubs. If your dishwasher is no longer heating water effectively or leaving dishes wet after a cycle, this heating element is a suitable solution.

2. Safety Information

WARNING: Before attempting any installation or repair, always disconnect power to the dishwasher at the circuit breaker or by unplugging the appliance. Failure to do so can result in serious injury or electrical shock.

• Wear appropriate personal protective equipment, such as gloves, to prevent injury.
• Ensure the work area is well-lit and clear of obstructions.
• If you are unsure about any step, consult a qualified appliance technician.

3. Package Contents

Verify that all components are present in your package:

• 1 x Dishwasher Heating Element
• 2 x Heater Fasteners

The image below illustrates the components included in the package.

Image: The package contains one U-shaped metal heating element with electrical terminals at each end, and two black hexagonal heater fasteners.

4. Compatibility

This heating element is compatible with various Kenmore dishwasher models, specifically those with stainless steel or metal tubs. Please verify your dishwasher model number against the list below:

• 665.17022400, 665.17022401, 665.17022402, 665.17022403
• 665.17023400, 665.17023401, 665.17023402, 665.17023403
• 665.17024400, 665.17024401, 665.17024402, 665.17024403
• 665.17029400, 665.17029401, 665.17029402, 665.17029403
• 665.17032400, 665.17032401, 665.17032402, 665.17032403
• 665.17033400, 665.17033401, 665.17033402, 665.17033403
• 665.17034400, 665.17034401, 665.17034402, 665.17034403
• 665.17039400, 665.17039401, 665.17039402, 665.17039403

This part is not compatible with dishwashers that have plastic tubs.

5. Installation Instructions (Setup)

Installation of the heating element can be performed using common household tools. Follow these steps carefully:

1. Disconnect Power: As stated in the safety section, ensure the dishwasher's power supply is completely disconnected.
2. Access the Heating Element: Open the dishwasher door and remove the lower dish rack. Locate the existing heating element at the bottom of the tub.
3. Disconnect Wires: Beneath the dishwasher, locate the electrical connections to the heating element. Carefully disconnect the wires from the terminals.
4. Remove Fasteners: Unscrew or unclip the fasteners that secure the heating element to the dishwasher tub. These are typically located on the underside of the dishwasher.
5. Remove Old Element: Carefully lift the old heating element out of the dishwasher tub.
6. Install New Element: Position the new heating element in the dishwasher tub, ensuring it sits correctly in its designated slots.
7. Secure Fasteners: From the underside of the dishwasher, attach and tighten the new heater fasteners to secure the element in place.
8. Reconnect Wires: Reconnect the electrical wires to the terminals of the new heating element. Ensure connections are secure.
9. Replace Components: Reinstall the lower dish rack.
10. Restore Power: Reconnect the dishwasher's power supply at the circuit breaker or by plugging it back in.
11. Test Operation: Run a short wash cycle to verify that the heating element is functioning correctly and heating the water.

Online video guides are available for visual assistance with the installation process. Search for 'Kenmore dishwasher heating element replacement' on video platforms.

6. Troubleshooting

This section addresses common issues related to the heating element's function.

Problem: Dishwasher Not Heating Water

Solution: If your dishwasher is not heating water, the heating element is a primary suspect. This replacement part is designed to resolve this issue. Ensure the element is correctly installed and all electrical connections are secure. If the problem persists after replacement, inspect other components such as the thermostat or control board.

Problem: Dishes Are Not Drying

Solution: A malfunctioning heating element can also lead to dishes remaining wet after a wash cycle, as it's crucial for the drying process. Replacing a faulty element with this new part should restore proper drying capabilities. Verify that the dishwasher's drying cycle is enabled in its settings.

7. Specifications

8. Warranty and Support

Your satisfaction is important. This product is designed to provide reliable performance for restoring heating and drying functions in your dishwasher. If you encounter any issues or require assistance with installation or troubleshooting, please contact the seller for support. They are available to help you with any questions or concerns regarding this replacement part.