Zevemomo 3-Piece Black Round Bar Table Set with Thickened Cushion Stools Instruction Manual

Introduction

Thank you for choosing the Zevemomo 3-Piece Black Round Bar Table Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before assembly and retain them for future reference.

Safety Information

WARNING:

• Do not load more than 200 lbs (90 kg) on the table.
• Do not load more than 350 lbs (158 kg) on each stool.
• This product is designed for adult use.
• Always follow assembly instructions carefully to avoid injury.
• Be cautious of sharp edges during assembly and use.
• Ensure all screws and bolts are tightened securely before use. Periodically check and re-tighten as necessary.

Package Contents

Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• 1 x Round Bar Table
• 2 x Thickened Cushion Stools with Backrest
• Assembly Hardware Kit (screws, bolts, Allen wrenches)
• Instruction Manual

Image: Package includes one table and two chairs. Dimensions for both table and chairs are shown.

Setup and Assembly

Follow the step-by-step instructions provided in the separate assembly guide included with your package. Ensure you have enough space and the necessary tools (usually included) before starting. It is recommended to assemble the furniture on a soft, clean surface to prevent scratches.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out. Check against the parts list.
2. Assemble Table Frame: Attach the table legs to the tabletop and the middle shelf according to the diagrams. Do not fully tighten screws until all parts are aligned.
3. Assemble Stool Frames: Attach the stool legs and footrests to the seat base.
4. Attach Stool Backrests: Secure the backrests to the assembled stool frames.
5. Final Tightening: Once all components are in place and aligned, securely tighten all screws and bolts.
6. Adjust Levelers: The table and stools feature adjustable bottom pads to ensure stability on uneven surfaces. Adjust as needed.

Image: The assembled 3-piece bar table set, highlighting its sturdy construction and ease of installation.

Operating Instructions

This bar table set is designed for dining, casual gatherings, or as a breakfast nook. Its compact size makes it suitable for small spaces.

• Tabletop Use: The round tabletop provides a surface for meals, drinks, or other items.
• Middle Shelf: The table includes a 13.2-inch wide circular shelf for convenient storage of small items like books, wine glasses, or bottle openers.
• Stool Comfort: The stools feature thickened PU leather cushions and backrests for comfortable seating. Footrests are integrated to allow for leg relaxation.

Image: Details of the table, including rounded edges for safety, a middle shelf for storage, and stable legs.

Image: Ergonomic design features of the stool, including the backrest, comfortable cushion, and footrests.

Maintenance and Care

Proper care will extend the life and appearance of your bar table set.

• Cleaning: Wipe the tabletop and metal frames with a damp cloth. For the PU leather cushions, use a soft, damp cloth and mild soap if necessary, then wipe dry. Avoid harsh chemicals or abrasive cleaners.
• Spills: Clean spills immediately to prevent staining, especially on the tabletop and cushions.
• Inspection: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as needed to maintain stability.
• Placement: Avoid placing the furniture in direct sunlight or near heat sources to prevent material damage or fading.

Troubleshooting

If you encounter any issues with your bar table set, refer to the following common solutions:

• Wobbling Table/Stools:
  • Ensure all assembly screws and bolts are fully tightened.
  • Adjust the bottom pads on the legs to level the furniture on uneven floors.
• Difficulty Assembling:
  • Review the assembly instructions carefully, paying attention to diagrams.
  • Ensure you are using the correct hardware for each step.
  • Do not overtighten screws until all parts are loosely assembled and aligned.
• Scratches/Dents:
  • Minor scratches on metal parts can sometimes be touched up with appropriate furniture paint.
  • For significant damage, contact customer support for advice.

Specifications

Warranty and Support

Zevemomo products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Zevemomo website. If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Zevemomo customer support through the retailer's platform or the contact information provided on our website.

Please have your model number (B0FGHTXYQ2) and purchase date ready when contacting support.