Greenworks 40V 20-inch Snow Thrower User Manual

1. Safety Information

Important Safety Instructions: Read and understand all instructions before operating the snow thrower. Failure to follow these instructions may result in electric shock, fire, and/or serious personal injury.

• Always wear appropriate protective gear, including gloves and eye protection.
• Keep hands and other body parts away from rotating parts.
• Do not operate the snow thrower in enclosed spaces or near flammable materials.
• Always unplug the snow thrower before performing any maintenance or cleaning.
• Ensure the work area is clear of debris and obstacles before operation.
• Do not allow children or untrained persons to operate the snow thrower.

2. Product Features

The Greenworks 40V 20-inch Snow Thrower is designed for efficient snow removal with user convenience in mind. Key features include:

• Effortless Snow Clearing: Powered by G-MAX 40V lithium-ion technology for convenient snow removal.
• Enhanced Performance: Brushless motor delivers increased torque, efficiency, and overall performance.
• Wide Clearing Path: 20-inch clearing path and 8-inch clearing depth to efficiently tackle snow-covered areas.
• Dual LED Headlights: For improved visibility during early morning or late evening operation.
• 180° Rotating Chute: Allows for adjustable snow discharge direction.
• Folding Handles: For compact storage and easy transport.

Figure 1: Overview of the Greenworks 40V 20-inch Snow Thrower highlighting its main features.

Figure 2: The snow thrower in action, demonstrating its efficient snow removal capability.

Figure 3: Dual LED headlights provide visibility for clearing snow in low-light conditions.

Figure 4: The brushless motor provides increased power and efficiency for demanding tasks.

3. Setup and Assembly

Before first use, some assembly is required. Follow these steps to prepare your snow thrower for operation:

1. Unpack Components: Carefully remove all parts from the packaging. Ensure all components listed in the packing list are present.
2. Handle Assembly: Attach the upper handle to the lower handle using the provided knobs and bolts. Ensure the cables are not pinched.
3. Chute Assembly: Secure the discharge chute to the snow thrower body. Ensure it rotates freely and locks into position.
4. Battery Installation: Insert the fully charged 40V 5Ah battery into the battery compartment until it clicks into place.

Figure 5: The battery compartment, designed for easy insertion and removal of the 40V battery.

4. Operating Instructions

Follow these steps for safe and effective snow removal:

1. Pre-Operation Check: Before each use, inspect the snow thrower for any loose parts, damage, or obstructions. Ensure the battery is fully charged.
2. Starting the Snow Thrower: Press and hold the safety button, then pull the bail switch lever towards the handle. The auger will begin to rotate.
3. Clearing Snow: Push the snow thrower forward at a comfortable pace. Do not force the unit through heavy snow. For deep snow, clear in smaller passes.
4. Adjusting Discharge Chute: Use the chute crank to change the direction of snow discharge. The chute can rotate 180 degrees.
5. Stopping the Snow Thrower: Release the bail switch lever to stop the auger.

Figure 6: The 180° rotating chute allows for precise control over snow discharge direction.

Figure 7: The ergonomic handle and simple controls ensure effortless starting and operation.

5. Maintenance

Regular maintenance ensures optimal performance and extends the life of your snow thrower. Always disconnect the battery before performing any maintenance.

• Cleaning: After each use, remove any snow, ice, or debris from the auger housing, chute, and exterior surfaces. Use a damp cloth for cleaning.
• Auger Inspection: Periodically check the auger blades for wear or damage. Replace worn blades to maintain clearing efficiency.
• Skid Shoes and Scraper Bar: Inspect the skid shoes and scraper bar for wear. Adjust or replace them as needed to prevent damage to the unit and the surface being cleared.
• Storage: Store the snow thrower in a dry, protected area. The folding handles allow for compact storage. Remove the battery during long-term storage.

6. Troubleshooting

If you encounter issues with your snow thrower, refer to the following common problems and solutions:

• Unit Does Not Start:
  • Ensure the battery is fully charged and properly inserted.
  • Check that the safety button is pressed before pulling the bail switch.
  • Inspect for any obstructions in the auger or chute.
• Snow Discharge is Weak or Clogged:
  • Clear any clogs from the discharge chute or auger housing (ensure battery is removed first).
  • Reduce the forward speed when clearing heavy or wet snow.
  • Ensure the auger blades are not excessively worn.
• Reduced Battery Runtime:
  • Ensure the battery is fully charged before use.
  • Operating in very cold temperatures can reduce battery performance.
  • Heavy snow conditions require more power, leading to shorter runtimes.

7. Specifications

8. Warranty and Support

Greenworks provides comprehensive support for its products.

• Warranty: This product typically comes with a manufacturer's warranty. Please refer to your product packaging or the official Greenworks website for specific warranty terms and conditions.
• Protection Plans: Additional protection plans may be available for purchase to extend coverage beyond the standard warranty. Examples include 2-Year and 3-Year Protection Plans.
• Customer Support: For technical assistance, parts, or service, please visit the Greenworks Store or contact their customer service directly.