Delupet Dog Training Collar DT-55 User Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your Delupet Dog Training Collar DT-55. This electronic training collar is designed to assist in training your dog's behavior through adjustable stimulation levels, including tone, vibration, and static stimulation. Please read this manual thoroughly before operating the device.

Image: The Delupet Dog Training Collar DT-55, featuring the handheld remote control and the receiver collar. The remote has a digital display and control buttons for various training modes. The collar is black with a textured strap and a sleek receiver unit.

What's Included

Your Delupet Dog Training Collar DT-55 package includes the following components:

• Remote Control
• Receiver Collar
• Charging Cable
• Contact Points (various sizes)
• User Manual (this document)

Setup Guide

1. Charging the Devices

Before first use, ensure both the remote control and the receiver collar are fully charged. Use the provided charging cable to connect them to a standard USB power adapter (not included).

• Connect the charging cable to the charging port on the remote control.
• Connect the charging cable to the charging port on the receiver collar.
• Allow approximately 2-3 hours for a full charge. The indicator light will change when charging is complete.

2. Pairing the Remote and Receiver

The remote control and receiver collar are typically pre-paired from the factory. If they are not responding to each other, follow these steps to re-pair them:

1. Ensure both devices are turned off.
2. Press and hold the power button on the receiver collar until the indicator light flashes rapidly.
3. While the receiver light is flashing, press any training mode button (Tone, Vibration, or Static) on the remote control.
4. The receiver light will stop flashing and remain solid, indicating successful pairing.

3. Fitting the Collar

Proper fit of the receiver collar is crucial for effective and safe operation. The contact points must make direct contact with your dog's skin.

• Select the appropriate length of contact points for your dog's coat type (shorter for short coats, longer for thick coats).
• Place the collar around your dog's neck, ensuring the receiver unit is positioned centrally on the underside of the neck.
• Adjust the strap so that it is snug but not overly tight. You should be able to fit one finger comfortably between the strap and your dog's neck.
• Trim any excess strap length if necessary.

Important Safety Note: The collar cannot be worn continuously for more than 12 hours. Prolonged wear can lead to skin irritation.

Operating Instructions

1. Turning On/Off

• To turn on the remote: Press and hold the power button until the screen illuminates.
• To turn on the receiver collar: Press and hold the power button until the indicator light illuminates.
• To turn off both devices: Press and hold their respective power buttons until the lights/screen turn off.

2. Selecting Training Modes

The Delupet DT-55 offers three primary training modes:

• Tone Mode: Emits an audible beep from the receiver collar. Used for warning or positive reinforcement.
• Vibration Mode: Delivers a non-harmful vibration. Useful for attention-getting or mild correction.
• Static Stimulation Mode: Provides a static pulse. Used for more direct correction.

Press the dedicated button on the remote for the desired mode. The remote's display will indicate the active mode.

3. Adjusting Stimulation Levels

Both Vibration and Static Stimulation modes have adjustable intensity levels to suit your dog's temperament and training needs.

• Use the + and - buttons on the remote to increase or decrease the intensity level.
• Start with the lowest level and gradually increase until your dog responds with a slight twitch or acknowledgment, indicating they feel the stimulation without distress.

4. Remote Control Operation

The remote control allows for convenient training from a distance. Ensure a clear line of sight for optimal range (up to 3300ft).

• The display shows battery levels for both the remote and receiver, selected mode, and intensity level.
• Buttons are clearly marked for each function (Tone, Vibration, Static, Level Adjustment).

Maintenance

Proper maintenance will extend the life of your Delupet Dog Training Collar DT-55.

• Cleaning: Clean the remote and receiver collar with a dry cloth. Do not use harsh chemicals or abrasive materials.
• Water Exposure: While the collar is water-resistant, avoid submerging it in water for extended periods. Keep away from excessive water exposure.
• Storage: Store the device in a dry place when not in use. Avoid extreme temperatures.
• Battery Care: Recharge batteries regularly, even if not in frequent use, to maintain battery health.

Troubleshooting

If you encounter issues with your Delupet Dog Training Collar DT-55, please refer to the following common solutions:

Specifications

Warranty and Support

Delupet stands behind the quality of its products. For warranty information, technical support, or any inquiries regarding your Delupet Dog Training Collar DT-55, please contact Delupet customer service through their official website or the retailer from whom you purchased the product.

Please retain your proof of purchase for warranty claims.