FunXplore Small Outdoor Dog House Instruction Manual

1. Product Overview

The FunXplore Small Outdoor Dog House is a versatile and durable shelter designed for small animals, including dogs and cats. Constructed from 100% natural fir wood with a pet-safe water-based coating, it offers a secure and non-toxic environment. Key features include a weatherproof design, an openable asphalt roof for easy cleaning, two escape doors for safety, and an elevated floor to protect against ground moisture.

Figure 1: Front view of the FunXplore Small Outdoor Dog House.

2. Key Features

• Weatherproof Construction: Crafted from 100% natural fir wood with a pet-safe, water-based coating. Thick wooden planks and a robust build ensure lasting protection against various weather conditions.
• Easy Cleaning: The waterproof asphalt roof is designed to lift open, allowing for quick and simple rinsing of dirt, debris, or pet hair. This feature is ideal for maintaining hygiene in outdoor environments.
• Dual Escape Doors: Equipped with two exit doors, providing a quick escape route for your pet if approached by potential predators, enhancing safety and peace of mind.
• Elevated Design: Integrated plastic feet raise the dog house above ground moisture and dampness. This promotes better air circulation and helps maintain a drier interior for your pet's comfort.
• Simple Assembly: All necessary components, including pre-drilled holes and hardware, are included for a hassle-free setup that typically takes less than 15 minutes.

Figure 2: Weatherproof features of the dog house.

Figure 3: Details of the openable roof, side door, and elevated base.

3. Assembly Instructions

Before beginning assembly, ensure all parts are present and undamaged. Refer to the included hardware and panel identification for correct placement. Assembly typically requires no specialized tools.

1. Unpack Components: Carefully remove all parts from the packaging. Verify against the parts list in your package to ensure all pieces are accounted for.
2. Assemble Base: Connect the base panels according to the pre-drilled holes. Ensure all connections are secure.
3. Attach Side Walls: Securely attach the side walls to the base. The panels are designed to interlock or fasten with provided hardware.
4. Install Front and Rear Panels: Attach the front panel (with the main entrance) and the rear panel to the side walls.
5. Secure Roof: Place the asphalt roof onto the assembled walls. Ensure it aligns correctly and fasten it using the provided hinges or locking mechanisms. The roof should be able to lift open smoothly for cleaning.
6. Install Elevated Feet: Attach the plastic feet to the underside of the base. These elevate the structure from the ground.

Figure 4: Product dimensions and demonstration of easy cleaning.

4. Operating Instructions

Once assembled, place the dog house in a suitable location, either indoors or outdoors. Ensure the area is level and provides adequate shade and protection from extreme weather. The elevated design helps with air circulation and keeps the interior dry.

The openable roof allows for quick access to the interior for cleaning or to interact with your pet. The two escape doors provide additional safety for pets, allowing them multiple exit points.

Figure 5: Interior view showing a small dog and internal dimensions.

Figure 6: The dog house is suitable for various small animals.

5. Maintenance

Regular maintenance will extend the life of your FunXplore dog house:

• Cleaning: Utilize the openable asphalt roof to easily access the interior. Wipe down surfaces with a damp cloth and mild, pet-safe cleaner. Rinse thoroughly and allow to air dry completely before your pet re-enters.
• Inspection: Periodically check all connections and hardware to ensure they remain tight and secure. Inspect the wood for any signs of wear or damage and address promptly.
• Weather Protection: While weatherproof, consider placing the dog house in a sheltered location during extreme weather conditions to maximize its lifespan and your pet's comfort.

6. Troubleshooting

If you encounter any issues with your FunXplore dog house, consider the following:

• Instability: Ensure all panels are fully interlocked and hardware is tightened. Verify the elevated feet are securely attached and the house is on a level surface.
• Water Leakage: Check that the asphalt roof is properly closed and sealed. Inspect for any cracks or gaps in the wood panels and apply a suitable sealant if necessary.
• Pet Reluctance: Introduce your pet to the house gradually. Place familiar bedding or toys inside to encourage use. Ensure the house is clean and comfortable.

7. Specifications

8. Warranty & Support

This FunXplore product comes with a 6-month warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or any inquiries regarding your product, please contact FunXplore customer service through the official FunXplore Store.

Please retain your proof of purchase for warranty validation.