DTCRCH 64G 1080P HD Mini Body Camera Pen User Manual

1. Introduction

This manual provides detailed instructions for the operation and maintenance of your DTCRCH 64G 1080P HD Mini Body Camera Pen, Model PC01. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Image 1.1: DTCRCH Mini Body Camera Pen with included accessories.

2. Package Contents

Verify that all items listed below are included in your package:

• 1 x DTCRCH Mini Body Camera Pen
• 1 x 64GB Memory Card (pre-installed or separate)
• 1 x Charging Cable
• 1 x Instruction Manual
• 1 x SIM Eject Pin
• 1 x Screwdriver
• 5 x Pen Refills
• 1 x Card Reader
• 1 x USB Adapter (OTG adapter)

Image 2.1: Visual representation of package contents.

3. Device Overview

Familiarize yourself with the main components of your camera pen.

Image 3.1: The camera pen features a single button for one-touch operation.

• Camera Lens: Located near the top clip.
• Power/Function Button: Controls power, recording, and photo capture.
• Indicator Light: Provides status feedback (e.g., charging, recording, standby).
• USB Port: For charging and data transfer.
• Micro SD Card Slot: For memory card insertion.
• Pen Tip: Standard writing function.

4. Setup

4.1 Initial Charging

Before first use, fully charge the device. Connect the camera pen to a USB power source (e.g., computer USB port, wall adapter) using the provided charging cable. The indicator light will show charging status and turn off or change color when fully charged. A full charge typically takes 1-2 hours.

Image 4.1: Charging the camera pen. The device supports recording while charging.

4.2 Inserting the Memory Card

The device comes with a 64GB memory card. It supports up to 128GB. Ensure the device is powered off before inserting or removing the memory card.

1. Locate the Micro SD card slot on the pen.
2. Gently insert the Micro SD card into the slot with the gold contacts facing down until it clicks into place.
3. To remove, push the card in slightly until it springs out.

4.3 Replacing Pen Refills

The camera pen functions as a regular writing pen. Five replacement refills are included.

1. Unscrew the pen from the middle part to separate the upper and lower sections.
2. Use the provided screwdriver to gently remove the old refill.
3. Insert a new refill and tighten it with the screwdriver.
4. Screw the pen back together.

Image 4.2: Instructions for replacing the pen refill.

5. Operating Instructions

The camera pen features a single button for all operations.

Image 5.1: One-Click Recording and Photo Capture Guide.

5.1 Power On/Off

• Power On: Long press the power button until the indicator light turns on.
• Power Off: Long press the power button until the indicator light turns off.

5.2 Recording Video (1080P HD)

• With the device powered on, long press the power button to start video recording. The indicator light will flash to indicate recording is in progress.
• To stop recording, short press the power button. The device will save the current video file and enter standby mode.

Image 5.2: The camera records in 1080P HD for clear footage.

5.3 Taking Photos

• With the device powered on and in standby mode, double-short press the power button to take a photo. The indicator light will flash once to confirm the photo has been taken.

5.4 Loop Recording

The camera pen features automatic loop recording. When the memory card is full, the oldest files will be overwritten by new recordings. This ensures continuous operation without manual file management.

Note: Maximum recording duration per clip is 5 minutes.

Image 5.3: Loop recording ensures continuous capture.

5.5 Night Vision

The device is equipped with advanced night vision capabilities, allowing it to capture clear footage even in low-light or total darkness environments.

Image 5.4: Night vision provides clear monitoring in dark conditions.

5.6 Data Transfer and Management

You can transfer and manage your recorded files using two methods:

5.6.1 OTG Function (Mobile Devices)

Use the included USB adapter to connect the camera pen directly to your smartphone or tablet. This allows for instant viewing, exporting, deleting, or sharing of HD videos without needing a computer. Compatible with both Android and iOS systems.

Image 5.5: Using the OTG function for mobile data transfer.

5.6.2 Computer Connection

Connect the camera pen to your computer using the provided USB cable or use the card reader to access the Micro SD card directly. The device will appear as a removable disk, allowing you to copy, move, or delete files.

Image 5.6: Charging and transferring data via computer.

6. Maintenance

6.1 Cleaning

• Use a soft, dry cloth to clean the exterior of the pen.
• For the camera lens, use a specialized lens cleaning cloth to avoid scratches.
• Do not use liquid cleaners or solvents.

6.2 Storage

• Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Keep out of reach of children.

6.3 Battery Care

• To prolong battery life, avoid fully discharging the battery frequently.
• If storing for an extended period, charge the battery to about 50% every few months.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official DTCRCH website. Keep your purchase receipt for warranty claims.

Manufacturer: DTCRCH