Introduction
This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your Motor Nucleartoys MNP-XH05A Zhaoyun + Dragon Horse + Cloak Alloy Assembly Model Kit. Please read this manual thoroughly before beginning assembly to ensure correct procedure and safe handling.
Important Safety Information
- Choking Hazard: This model kit contains small parts. Keep out of reach of young children to prevent accidental ingestion.
- Sharp Edges: Some components may have sharp edges. Handle with care during assembly.
- Material: The model is constructed from ABS and alloy materials. Avoid exposure to extreme temperatures or harsh chemicals.
- Adult Supervision: Adult supervision is recommended for younger assemblers.
Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Zhaoyun Figure Components (ABS & Alloy)
- Dragon Horse Components (ABS & Alloy)
- Cloak (Fabric)
- Assembly Tools (e.g., nippers, file - not included unless specified separately)
- Instruction Manual (this document)
Setup
- Unpack Components: Carefully remove all parts from the packaging.
- Organize Parts: Lay out all components on a clean, flat, and well-lit surface. Group similar parts together.
- Review Instructions: Familiarize yourself with the overall assembly process by reviewing the steps outlined in this manual.
- Prepare Tools: Ensure you have any necessary tools such as hobby nippers, a craft knife, or small screwdrivers (not included unless specified).
Assembly Instructions
Follow these steps carefully to assemble your model kit. Refer to the images for visual guidance.
1. General Model Kit Assembly
- Part Removal: Carefully detach parts from their runners using hobby nippers. Avoid pulling or twisting, which can damage parts.
- Clean Nubs: Use a hobby knife or file to carefully remove any remaining nubs or excess plastic from the detached parts.
- Follow Numbered Steps: Assemble the figure and horse components according to the numerical sequence typically found in model kit instructions (Note: specific numbered steps are not provided in the input, so this is a general guideline). Ensure parts fit snugly.
- Check Connections: Verify that all connections are secure before proceeding to the next step.
2. Assembling the Zhaoyun Figure and Dragon Horse
Once the individual components of the Zhaoyun figure and Dragon Horse are assembled, you can combine them.
Image 1: The Zhaoyun figure is shown fully assembled and positioned atop the Dragon Horse. The figure is equipped with its spear, and the horse is in a rearing pose, showcasing the intricate details of both models.
Image 2: A side view of the Zhaoyun figure mounted on the Dragon Horse, highlighting the dynamic pose and the flow of the figure's cloak (not fully attached in this view, but draped).
- Mounting the Figure: Carefully align the connection points on the Zhaoyun figure's legs with the corresponding pegs or slots on the Dragon Horse's saddle area. Gently press the figure into place until it is securely seated.
- Adjusting Pose: Once mounted, you can carefully adjust the figure's pose, including its arms and weapon, to achieve a dynamic display.
3. Attaching the Cloak
The fabric cloak adds a distinctive element to the Zhaoyun figure, whether mounted or standing alone.
Image 3: A close-up of the fabric cloak, displaying its purple color, intricate silver and gold patterns, and the textured trim at the top.
Image 4: The Zhaoyun figure standing independently, with the cloak draped over its shoulders, showcasing the full length and design of the cloak from the rear.
Image 5: The Zhaoyun figure in a dynamic standing pose, holding its weapon, with the cloak flowing behind it, emphasizing the figure's articulation and the cloak's aesthetic.
- Locate Attachment Points: Identify the small pegs or slots on the Zhaoyun figure's back or shoulders designed for cloak attachment.
- Secure Cloak: Gently attach the cloak to these points. The cloak is designed to drape naturally over the figure.
- Positioning: Adjust the cloak's position to achieve the desired aesthetic, whether the figure is mounted or standing.
Operating (Display & Posing)
Your MNP-XH05A model kit is designed for display and posing. Handle with care to avoid damage to articulated joints or painted surfaces.
- Articulation: The figure and horse feature multiple points of articulation. Gently move joints to achieve desired poses. Avoid forcing joints beyond their natural range of motion.
- Stability: When posing, ensure the model is stable to prevent it from falling. Consider using a display stand if available (not included unless specified).
- Environmental Factors: Display the model in a stable environment, away from direct sunlight, extreme temperatures, and high humidity, which can affect materials over time.
Maintenance
- Cleaning: Dust the model regularly with a soft, dry brush or a microfiber cloth. For stubborn dirt, lightly dampen a cloth with water and gently wipe. Avoid abrasive cleaners or solvents.
- Joint Care: If joints become stiff, a very small amount of silicone lubricant can be applied. If joints become loose, a thin layer of clear nail polish or hobby cement on the ball joint (allow to dry completely) can increase friction.
- Cloak Care: The fabric cloak can be gently spot cleaned with a mild detergent and water if necessary. Allow to air dry completely. Do not machine wash or tumble dry.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Parts do not fit together | Excess plastic nubs; incorrect orientation; incompatible parts. | Ensure all nubs are removed. Check part numbers and orientation against instructions. Do not force parts. |
| Joints are too loose | Wear and tear; manufacturing tolerance. | Apply a thin layer of clear nail polish or hobby cement to the ball joint and allow to dry completely before reassembling. |
| Joints are too stiff | Tight tolerance; paint buildup. | Gently work the joint. A very small amount of silicone lubricant can be applied. Do not force. |
| Model falls over easily | Unstable pose; uneven surface. | Adjust the pose for better balance. Ensure the display surface is flat and stable. Consider a display stand. |
Specifications
- Model Number: MNP-XH05A
- Product Dimensions: 3 x 2 x 4 inches (Figure only, approximate)
- Item Weight: 13.22 pounds (Total package weight, approximate)
- Material: ABS, Alloy, Fabric (Cloak)
- Theme: Fantasy
- Color: Black (Primary figure color, with various accents)
Warranty Information
As this is a Generic brand product and specific warranty details are not provided, please refer to the retailer's return policy or contact the seller directly for any warranty-related inquiries regarding manufacturing defects or missing parts upon receipt.
Customer Support
For further assistance, questions, or to report missing/damaged parts, please contact the seller or retailer from whom you purchased this product. Please have your order number and product details ready when contacting support.
