FANMIS Solar Powered Casual Quartz Watch Model 6016 User Manual

Introduction

Thank you for purchasing the FANMIS Solar Powered Casual Quartz Watch Model 6016. This manual provides detailed instructions for setting up, operating, and maintaining your watch. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your timepiece.

Product Overview

The FANMIS Model 6016 is a versatile men's watch featuring both analog and digital displays. It is designed for daily wear and various outdoor activities, offering a robust and functional design.

• Dual Display: Analog and digital timekeeping.
• Multifunctionality: Includes calendar, alarm, time, date, and timing display.
• Backlight: EL lamp for clear visibility in low-light conditions.
• Durability: Shock-resistant design.
• Water Resistance: 5 ATM (50 meters) for daily life activities.
• Power Source: Solar Powered.

Watch Components

Familiarize yourself with the watch's buttons and display areas.

Image: Front view of the FANMIS Model 6016 watch, highlighting its analog hands and digital displays for time, date, and day of the week.

• MODE Button: Cycles through different modes (Time, Alarm, Stopwatch).
• LIGHT Button: Activates the EL backlight.
• START Button: Used for starting/stopping stopwatch, adjusting settings.
• RESET Button: Used for resetting stopwatch, adjusting settings.
• Crown: Adjusts analog time.

Setup

Initial Charge (Solar Power)

Your watch is solar-powered. Before first use, expose the watch face to direct sunlight or strong artificial light for several hours to ensure it is fully charged. Avoid covering the watch face for extended periods to maintain charge.

Setting Analog Time

1. Pull out the crown located on the right side of the watch.
2. Rotate the crown to set the analog hour and minute hands to the correct time.
3. Push the crown back in to start the analog timekeeping.

Operating Instructions

Mode Selection

Press the MODE button to cycle through the following modes:

• Time Mode: Displays current digital time, date, and day of the week.
• Alarm Mode: Allows setting and activating the alarm.
• Stopwatch Mode: For measuring elapsed time.

Setting Digital Time and Date

1. In Time Mode, press and hold the RESET button until the seconds start flashing. This indicates setting mode.
2. Press the MODE button to cycle through the settings: seconds → hour → minute → month → date → day of the week.
3. Use the START button to adjust the flashing value.
4. Press the RESET button again to exit setting mode.

Using the Alarm

1. Press the MODE button to enter Alarm Mode.
2. Press and hold the RESET button until the alarm hour starts flashing.
3. Press the START button to adjust the hour.
4. Press the MODE button to select minutes, then use START to adjust.
5. Press the RESET button to confirm and exit.
6. To turn the alarm ON/OFF, press the START button while in Alarm Mode (without holding RESET). An alarm icon will appear/disappear.

Using the Stopwatch

1. Press the MODE button to enter Stopwatch Mode.
2. Press the START button to begin timing.
3. Press START again to pause timing.
4. Press RESET to clear the stopwatch to zero.
5. To resume timing after pausing, press START.

Activating the Backlight

Image: The watch display illuminated by its green EL backlight, showing clear visibility of the digital time and other indicators in the dark.

Press the LIGHT button to illuminate the digital display. The backlight will remain active for a few seconds.

Maintenance

• Cleaning: Wipe the watch with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly.
• Water Resistance: The watch is 5 ATM water-resistant. This means it is suitable for daily use, splashes, rain, and short periods of swimming. Do not press any buttons underwater. Avoid hot water, steam, or extreme temperature changes, as this can compromise the water seals.
• Solar Charging: Regularly expose the watch to light to keep it charged. Avoid storing it in dark places for extended periods.
• Temperature: Avoid exposing the watch to extreme hot or cold temperatures, as this can affect its accuracy and battery life.
• Chemicals: Avoid contact with solvents, detergents, perfumes, and other chemicals, which can damage the watch case, band, or seals.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact FANMIS customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.

Manufacturer: Fanmis