JALOSOFO Charger for INTETURE BP20

JALOSOFO Charger for INTETURE BP20 Cordless Vacuum Cleaner User Manual

Model: Charger for INTETURE BP20

Introduction

This manual provides essential information for the safe and effective use of your JALOSOFO charger, designed for the INTETURE BP20 29.6V cordless vacuum cleaner. Please read these instructions carefully before use and retain them for future reference.

Safety Information

To ensure safe operation and prevent damage, observe the following safety guidelines:

  • Ensure the charger's voltage and current specifications match your device's requirements. Using an incompatible charger may damage your vacuum cleaner or the charger itself.
  • The charger is equipped with multiple safety protections, including overcurrent protection, overvoltage protection, short circuit protection, and over temperature protection.
  • Do not expose the charger to water or excessive moisture.
  • Avoid dropping or subjecting the charger to strong impacts.
  • Do not attempt to disassemble or modify the charger.
  • Unplug the charger from the power outlet when not in use or during electrical storms.
Diagram showing various safety protections: Short Circuit Protection, Over Current Protection, Over Temperature Protection, Over Charge Protection, Over Voltage Protection, Over Load Protection.

Image: Safety Protections integrated into the charger design.

Package Contents

Verify that all items are present in the package:

  • 1 x JALOSOFO Charger (AC/DC Adapter) for INTETURE BP20 Cordless Vacuum Cleaner

Specifications

Feature Detail
Input Voltage 100V-240V AC, 50Hz-60Hz
Output Voltage 36V (compatible with 29.6V battery systems)
Output Current 0.5 Amps
Power Cord Length 5.9 feet (1.8 meters)
Connector Type Barrel Connector
Safety Certifications CE, FCC, RoHS Listed
Protections Overcurrent, Overvoltage, Short Circuit, Over Temperature
Compatible Device INTETURE BP20 29.6V Cordless Vacuum Cleaner
Diagram showing the dimensions of the charger unit and the length of the power cord, which is 5.9 feet (1.8 meters).

Image: Charger dimensions and cord length.

Close-up of the charger's standard plug and the durable output barrel connector, highlighting the quality of the cable.

Image: Details of the standard plug and output connector.

Setup

  1. Verify Compatibility: Before connecting, ensure your vacuum cleaner is an INTETURE BP20 model with a 29.6V battery. This charger is specifically designed for this model.
  2. Connect to Vacuum: Insert the barrel connector of the charger into the charging port of your INTETURE BP20 cordless vacuum cleaner. Ensure a firm connection.
  3. Plug into Power Outlet: Insert the AC plug of the charger into a standard 100V-240V wall power outlet.
The JALOSOFO charger plugged into a wall outlet and connected to an INTETURE BP20 cordless vacuum cleaner, indicating proper setup for charging.

Image: Charger connected to vacuum cleaner and power outlet.

Operating Instructions

Once properly connected, the charger will begin to supply power to your vacuum cleaner's battery.

  • Charging Indicator: A green light on the charger unit will illuminate and stay on when it is plugged into a power outlet, indicating that it is receiving power.
  • Charging Time: Charging time will vary depending on the battery's current charge level. Refer to your INTETURE BP20 vacuum cleaner's manual for specific charging duration guidelines.
  • Disconnection: Once charging is complete, first unplug the charger from the wall outlet, then disconnect the barrel connector from the vacuum cleaner.
The JALOSOFO charger plugged into a wall outlet, showing a green indicator light illuminated, signifying it is powered on.

Image: Green light indicator on the charger when plugged in.

Maintenance

Proper maintenance ensures the longevity and performance of your charger:

  • Cleaning: Disconnect the charger from both the power outlet and the vacuum cleaner before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the power cord to prevent damage.
  • Inspection: Periodically inspect the power cord and connectors for any signs of damage, such as cuts, fraying, or bent pins. If damage is observed, discontinue use and replace the charger.

Troubleshooting

Problem Possible Cause Solution
Charger light is off / Vacuum not charging.
  • No power from outlet.
  • Loose connection.
  • Charger or vacuum fault.
  • Test the outlet with another device.
  • Ensure all connections (wall to charger, charger to vacuum) are secure.
  • Verify the charger's green indicator light is on when plugged into the wall.
Vacuum battery shows low charge even after extended charging.
  • Incompatible charger.
  • Battery issue with the vacuum.
  • Charger fault.
  • Confirm the charger's output voltage (36V) is compatible with your INTETURE BP20's 29.6V battery system.
  • Consult your vacuum cleaner's manual for battery troubleshooting.
  • If the charger gets unusually hot or shows no indicator light, it might be faulty.
Charger becomes warm during use. Normal operation. It is normal for chargers to become warm during operation. If it becomes excessively hot to touch or emits smoke/smell, unplug immediately and discontinue use.

Warranty and Support

Your JALOSOFO charger comes with a commitment to quality:

  • Money Refund: 30 days from the date of purchase.
  • Free Exchange: 365 days from the date of purchase.

For any assistance, questions, or concerns regarding your charger, please do not hesitate to contact JALOSOFO customer support. We are available to help you at any time.

© 2026 JALOSOFO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.