Introduction
Thank you for choosing the EDISHINE HLFL03M 70-inch Industrial Dimmable Floor Lamp. This lamp is designed to provide versatile and energy-efficient lighting with a rustic industrial farmhouse aesthetic. Its unique diamond-shaped lampshades and stepless dimming feature make it a functional and stylish addition to any living room, bedroom, or office space. This manual provides essential information for safe and proper use, including setup, operation, maintenance, and troubleshooting.
Setup Instructions
The EDISHINE HLFL03M floor lamp is designed for easy assembly without the need for extra tools. Please follow these steps carefully:
1. Unboxing and Component Check
Carefully remove all components from the packaging. Ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
Image: All components included in the box for the EDISHINE HLFL03M floor lamp.
Included Components:
- Weighted Base
- Multiple Pole Sections
- Lamp Head Assembly with 3 Sockets
- 3 Diamond-Shaped Metal Lampshades
- 3 Socket Rings
- 3 LED Edison Bulbs (E26 base, ST58 bulb type, 4W each)
- Power Cord
2. Lamp Pole Assembly
Begin by screwing the pole sections together in a clockwise direction. Ensure each section is securely tightened to form the main vertical pole of the lamp.
Image: Step 1 of assembly, showing how to screw the lamp pole sections together.
3. Attaching the Base
Once the main pole is assembled, attach it to the weighted base by screwing it clockwise until it is firm and stable. The weighted base ensures the lamp remains upright and resists tipping.
Image: Step 2 of assembly, showing the lamp pole being attached to the heavy base.
4. Securing the Lampshades
For each of the three lamp heads, remove the pre-installed socket ring. Place a diamond-shaped metal lampshade over the socket, then re-secure it by screwing the socket ring back into place. Ensure the lampshade is firmly attached.
Image: Step 3 of assembly, demonstrating how to secure the diamond-shaped lampshade with the socket ring.
5. Installing the LED Bulbs
Gently screw the included LED Edison bulbs into each of the three lamp sockets. Do not overtighten. The lamp comes with 3 high-efficiency LED bulbs (E26 base, ST58 bulb type, 4W each) that provide warm white light at 2700 Kelvin.
Image: Step 4 of assembly, showing the installation of the LED Edison bulbs.
Your EDISHINE floor lamp is now assembled and ready for use.
Operating Instructions
The EDISHINE HLFL03M floor lamp features a convenient rotary switch for easy control of power and brightness.
1. Power On/Off
To turn the lamp on or off, simply rotate the switch located on the main pole. A click indicates the power is toggled.
2. Stepless Dimming
This lamp offers 0-100% stepless dimming. Once the lamp is on, rotate the switch clockwise to increase brightness and counter-clockwise to decrease brightness. This allows you to precisely adjust the lighting to create the perfect ambiance for any activity, from bright reading light to soft, relaxing illumination.
Image: The rotary switch for stepless dimming, allowing adjustment from 0% to 100% brightness.
Maintenance
To ensure the longevity and optimal performance of your EDISHINE floor lamp, follow these simple maintenance guidelines:
- Cleaning: Always unplug the lamp before cleaning. Use a soft, dry cloth to wipe down the metal frame and lampshades. Avoid abrasive cleaners or solvents that could damage the finish.
- Bulb Replacement: When replacing bulbs, ensure the lamp is unplugged and the bulbs have cooled. Use E26 base LED bulbs, preferably clear Edison-style bulbs to maintain the aesthetic. The maximum wattage per bulb is 60W, but the included LED bulbs are 4W for energy efficiency.
- Stability Check: Periodically check that all pole sections and the base are securely tightened to maintain stability.
- Cord Care: Avoid placing heavy objects on the power cord or running it under carpets, which can cause damage.
Troubleshooting
If you encounter any issues with your EDISHINE floor lamp, please refer to the following common troubleshooting steps:
- Lamp Does Not Turn On:
- Ensure the power cord is securely plugged into a working electrical outlet.
- Check if the rotary switch is fully turned to the "on" position.
- Verify that the light bulbs are correctly installed and not loose.
- Test the bulbs in another working fixture to confirm they are not burnt out.
- Dimming Feature Not Working:
- Ensure you are using dimmable LED bulbs. The included bulbs are dimmable.
- Rotate the switch slowly and deliberately to adjust the brightness.
- Lamp is Unstable:
- Tighten all pole sections and the base connection firmly.
- Ensure the lamp is placed on a flat, level surface.
If these steps do not resolve the issue, please contact EDISHINE customer support for further assistance.
Specifications
| Brand | EDISHINE |
| Model Name | HLFL03M |
| Type | Floor Lamp |
| Style | Rustic Industrial Farmhouse |
| Color | Brown |
| Height | 70 inches |
| Base Material | Metal |
| Shade Material | Metal (Diamond-Shaped Cage) |
| Light Source Type | LED |
| Number of Light Sources | 3 |
| Bulb Base | E26 |
| Included Bulbs | 3 x 4W LED Edison Bulbs (2700K Warm White) |
| Switch Type | Rotary Switch (0-100% Stepless Dimming) |
| Power Source | Corded Electric |
| Item Weight | 10.69 Pounds |
| Indoor/Outdoor Usage | Indoor |
| Assembly Required | Yes |
Warranty and Support
EDISHINE products are manufactured with quality and durability in mind. For specific warranty information regarding your HLFL03M floor lamp, please refer to the warranty card included in your product packaging or visit the official EDISHINE website. For technical support, replacement parts, or any inquiries, please contact EDISHINE customer service through their official channels.
Customer Service Contact: Please refer to the contact information provided on your product packaging or the EDISHINE official website for the most up-to-date support details.